Résumé du contenu de la page N° 1
OM-278 163 769AC
2007 −08
Processes
Multiprocess Welding
Description
Arc Welding Power Source
™
Dimension
652 and 812
File: Multi-Process
Visit our website at
www.MillerWelds.com
Résumé du contenu de la page N° 2
From Miller to You Thank you and congratulations on choosing Miller. Now you can get the job done and get it done right. We know you don’t have time to do it any other way. That’s why when Niels Miller first started building arc welders in 1929, he made sure his products offered long-lasting value and superior quality. Like you, his customers couldn’t afford anything less. Miller products had to be more than the best they could be. They had to be the best you could buy. Today, the people that bu
Résumé du contenu de la page N° 3
TABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2. Arc Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-3. Additional Symbols For Insta
Résumé du contenu de la page N° 4
Declaration of Conformity for European Community (CE) Products This information is provided for units with CE certification (see rating label on unit). NOTE Manufacturer: European Contact: Miller Electric Mg. Co. Mr. Danilo Fedolfi, 1635 W. Spencer St. Managing Director Appleton, WI 54914 USA ITW Welding Products Italy S.r.l. Phone: (920) 734-9821 Via Privata Iseo 6/E 20098 San Giuliano Milanese, Italy Phone: 39(02)98290-1 Fax: 39(02)98290203 European Contact Signature: Declares that the produ
Résumé du contenu de la page N° 5
SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING som _2007 −04 7 Protect yourself and others from injury — read and follow these precautions. 1-1. Symbol Usage DANGER! − Indicates a hazardous situation which, if Indicates special instructions. not avoided, will result in death or serious injury. The possible hazards are shown in the adjoining symbols or explained in the text. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. The possible This gro
Résumé du contenu de la page N° 6
Do not use welder to thaw frozen pipes. FUMES AND GASES can be hazardous. Remove stick electrode from holder or cut off welding wire at contact tip when not in use. Welding produces fumes and gases. Breathing Wear oil-free protective garments such as leather gloves, heavy these fumes and gases can be hazardous to your shirt, cuffless trousers, high shoes, and a cap. health. Remove any combustibles, such as a butane lighter or matches, Keep your head out of the fumes. Do not breathe the
Résumé du contenu de la page N° 7
1-3. Additional Symbols For Installation, Operation, And Maintenance FIRE OR EXPLOSION hazard. MOVING PARTS can cause injury. Do not install or place unit on, over, or near Keep away from moving parts such as fans. combustible surfaces. Keep all doors, panels, covers, and guards Do not install unit near flammables. closed and securely in place. Do not overload building wiring − be sure power supply system is Have only qualified persons remove doors, panels, covers, or properly sized,
Résumé du contenu de la page N° 8
1-4. California Proposition 65 Warnings For Gasoline Engines: Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to Engine exhaust contains chemicals known to the State of cause birth defects and, in some cases, cancer. (California California to cause cancer, birth defects, or other reproduc- Health & Safety Code Section 25249.5 et seq.) tive harm. For Diesel Engines: Battery posts, terminals and related accessories contain lead and lead
Résumé du contenu de la page N° 9
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION fre_som_2007 −04 7 Se protéger et protéger les autres contre le risque de blessure — lire et respecter ces consignes. 2-1. Symboles utilisés DANGER! − Indique une situation dangereuse qui si on Indique des instructions spécifiques. l’évite pas peut donner la mort ou des blessures graves. Les dangers possibles sont montrés par les symboles joints ou sont expliqués dans le texte. Indique une situation dangereuse qui si on l’évite pas peu
Résumé du contenu de la page N° 10
Il reste une TENSION DC NON NÉGLIGEABLE dans LE SOUDAGE peut provoquer un in les sources de soudage onduleur quand on a cendie ou une explosion. coupé l’alimentation. Le soudage effectué sur des conteneurs fermés tel Arrêter les convertisseurs, débrancher le courant électrique et que des réservoirs, tambours ou des conduites peu décharger les condensateurs d’alimentation selon les instructions provoquer leur éclatement. Des étincelles peuven indiquées dans la partie Entretien avant de toucher
Résumé du contenu de la page N° 11
Protéger les bouteilles de gaz comprimé d’une chaleur excessive, LES ACCUMULATIONS DE GAZ des chocs mécaniques, des dommages physiques, du laitier, des risquent de provoquer des blessures flammes ouvertes, des étincelles et des arcs. ou même la mort. Placer les bouteilles debout en les fixant dans un support station- Fermer l’alimentation du gaz protecteur en cas naire ou dans un porte-bouteilles pour les empêcher de tomber ou de non-utilisation. de se renverser. Veiller toujours à bien
Résumé du contenu de la page N° 12
LES FILS DE SOUDAGE peuvent LE RAYONNEMENT HAUTE FRÉ- provoquer des blessures. QUENCE (H.F.) risque de provoquer des interférences. Ne pas appuyer sur la gâchette avant d’en avoir reçu l’instruction. Le rayonnement haute fréquence (H.F.) peut Ne pas diriger le pistolet vers soi, d’autres per- provoquer des interférences avec les équipe- sonnes ou toute pièce mécanique en enga- ments de radio −navigation et de communica- geant le fil de soudage. tion, les services de sécurité et les ordinat
Résumé du contenu de la page N° 13
2-5. Principales normes de sécurité Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1, L4W 5NS (téléphone : 800-463-6727 ou à Toronto 416-747-4044, site de Global Engineering Documents (téléphone : 1-877-413-5184, site Internet : www.csa-international.org). Internet : www.global.ihs.com). Safe Practice For Occupational And Educational Eye And Face Protec- tion, ANSI Standard Z87.1, de American National Standards Institute, Recommended Safe Practices for the Preparation for We
Résumé du contenu de la page N° 14
OM-278 Page 6
Résumé du contenu de la page N° 15
A complete Parts List is available at www.MillerWelds.com SECTION 3 − DEFINITIONS 3-1. General Precautionary Label Warning! Watch Out! There are possible hazards as shown by the symbols. 1 Electric shock from welding electrode or wiring can kill. 1.1 Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves. 1.2 Protect yourself from electric shock by insulating yourself from work and ground. 1.3 Disconnect input plug or power before working on machin
Résumé du contenu de la page N° 16
A complete Parts List is available at www.MillerWelds.com 3-2. Input Connection Label 1/96 12 3 4 1 Warning! Watch Out! There are possible hazards as shown by the symbols. 2 Electric shock from wiring can kill. 3 Disconnect input plug or power before working on machine. 4 Read the Owner’s Manual before working on this machine. 5 Consult rating label for input ? power requirements, and 1 2 V 3 check power available at the job site − they must match. 6 Read Owner’s Manual and inside labels for c
Résumé du contenu de la page N° 17
A complete Parts List is available at www.MillerWelds.com 3-5. Manufacturer’s Rating Label For CE Products For label location see Section 4-4. 3-6. WEEE Label (For Products Sold Within The EU) Do not discard product (where ap- plicable) with general waste. Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collec- tion facility. Contact your local recycling office or your local distributor for further information. OM-278 Page 9
Résumé du contenu de la page N° 18
A complete Parts List is available at www.MillerWelds.com 3-7. Symbols And Definitions Some symbols are found only on CE products. NOTE Amperage/Voltage Gas Tungsten Arc Shielded Metal Arc Amperes Control −Panel Welding (GTAW) Welding (SMAW) A Gas Metal Arc Temperature Wire Feeder Arc Force (DIG) Welding (GMAW) Output Circuit Breaker Remote Volts V Positive High In- Positive Low In- Negative Weld ductance Weld ductance Weld Input Output Terminal Output Terminal Output Terminal On Off Percent D
Résumé du contenu de la page N° 19
A complete Parts List is available at www.MillerWelds.com 4-2. Duty Cycle And Overheating Duty Cycle is percentage of 10 min- utes that unit can weld at rated load without overheating. If unit overheats, thermostat(s) opens, output stops, and cooling fan runs. Wait fifteen minutes for unit to cool. Reduce amperage or duty cycle before welding. NOTICE − Exceeding duty cycle can damage unit and void warranty. 100% Duty Cycle Continuous Welding Overheating 0 A/V 15 OR Reduce Duty Cycle Minutes 16
Résumé du contenu de la page N° 20
A complete Parts List is available at www.MillerWelds.com 4-4. Selecting A Location 1 Lifting Eye 2 Lifting Forks Use lifting eye or lifting forks to move unit. Movement If using lifting forks, extend forks 1 beyond opposite side of unit. 3 Rating Label (Non CE Models Only) Use rating label to determine input power needs. Label located under OR front access door. 2 4 Rating Label (CE Models Only) Use rating label to determine input power needs. Label located on rear Location And Airflow access
