Instruction d'utilisation Marshall Amplification Echohead

Résumé du contenu de la page N° 1

Echohead Suggested Settings
EH-1 Echohead
SPACE WALK (Amp: Clean)
SLAP BACK (Amp: Slightly Overdriven)
Marshall Amplification plc
Denbigh Road, Bletchley, Milton Keynes,
REMEMBER THIS (Amp: Clean)
MK1 1DQ, England.
Tel : +44 (0)1908 375411 Fax : +44 (0)1908 376118
www.marshallamps.com
Whilst the information contained herein is correct at the time of
publication, due to our policy of constant improvement and
development, Marshall Amplification plc reserve the right to alter
specifications with

Résumé du contenu de la page N° 2

WARNING! 11 IMPORTANT Precautions Refer all servicing to qualified service personnel. Servicing is 56 7 8 required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING Do not expose the apparatus to rain or moisture. Do not expose the apparatus to dripping or splashing. No objects filled with From The Chairman liquids s

Résumé du contenu de la page N° 3

Introduction Setting Up The Echohead pedal is a stereo delay pedal offering a maximum delay time of 2000ms. From crystal clear echoes to hypnotic reverse delays via the vintage whir of an old tape machine the Echohead recreates six different delay modes for you to explore giving you full control over the delay time, feedback and level of every mode. The Echohead's dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or allowing the p

Résumé du contenu de la page N° 4

Mod Filter Sweeping across your sound, synced to your delay 3. 'Out 1 / Left' Jack Socket - Passive Bypass time, a modulating filter adds movement and depth Out 1 is connected to a passive bypass circuit. The passive to the echoes. bypass ensures complete tonal integrity by disconnecting the output of the effects circuit when not in operation. When a 6. Delay Time jack is connected to Out 1 the pedal operates in mono mode. Controls the delay time of the echoes from 20ms (fully anti- clockwise)

Résumé du contenu de la page N° 5

Trouble Shooting Battery Replacement 1. To replace the battery, open the easily accessed coin screw battery cover plate by loosening screw as shown, then disconnect the battery connector lead. 2. Use PP3 or equivalent battery (for improved battery life use alkaline type). 3. Always ensure that the battery WHAT IF 33 333 NO is removed when the pedal is OUTPUT not in use for long periods. 4. Dispose of old battery in a 3 NOISE IN safe place. BYPASS INDICATOR 3 3 3 LED NOT INPUT ON LEAD SOUND TOO