Instruction d'utilisation Klaxon Klaxalarm Terrier 18-980181

Résumé du contenu de la page N° 1

Klaxalarm Terrier (18-980181)

Battery Operated Stand Alone Fire Alarms


Installation Instructions






1. General
2. Installation
3. Operation, Testing and maintenance
4. Tone and Sound Level Adjustment
5. Connecting External Manual Call Points
6. Interlinking Multiple Units

Résumé du contenu de la page N° 2

1. General Klaxalarm is a primary battery (LR14 C Cells qty 6) operated self-contained fire alarm. The intended use is for protection of small or temporary buildings. The Terrier Klaxalarm incorporates a re-settable manual call point and an electronic sounder with a choice of three tones. The products may be interlinked with a 3 core cable so that if one unit is activated all the other units will sound simultaneously. Additional Manual Call Points can also be connected to the units.

Résumé du contenu de la page N° 3

4. Tone and Sound Level Adjustment The Terrier model incorporates 3 user selectable tones. In order to change the tone setting the front cover of the electronic sounder within the Klaxalarm must be removed by undoing the two fixing screws. The tones are selected as follows: Tone Black Lead Jumper Continuous Cont (-) Terminal Leave in factory setting Warble Tone (-) Terminal Leave in factory setting Alternating Tone (-) Terminal Change position The sound level can be reduced by cha

Résumé du contenu de la page N° 4

6. Interlinking Multiple Units Multiple units can be interlinked and/or connected to external manual call points using three core cable as in the example wiring diagram below. NOTE: For correct operation with external manual call points it is essential to use a call point with a NORMALLY CLOSED CONTACT (i.e. opening contact or changeover contact). We strongly recommend the use of Klaxon Manual Call Point Model No. 17-970073 to ensure correct operation. If an external call point is