Instruction d'utilisation Kettler 2852

Résumé du contenu de la page N° 1

2852 52” ROUND DINING TABLE
(16) 1/4 - 20 x 2 1/2” Bolts
Contents:
(4) 1/4 - 20 x 3” Bolts
(4) Legs
(2) Side Braces
Tool Required:
(2) Table feet
#3 Phillips Head Screwdriver
(1) Table Top
1.
Assembly Instructions
1.
With the curved side facing out
align the table leg with the predrilled
hole on the foot of the table and insert a
1/4 - 20 x 3” bolt then tighten with the
phillips screwdriver.
Repeat on the other end, do both sets.
2.
Place the leg with foot
2.
inside the frame unde

Résumé du contenu de la page N° 2

Care & Maintenance Ocean Comfort products are constructed from HDPE (High Density Polyethelene), primarily a recycled material. UV inhibitors are also added to resist fading. Simply maintain your furniture by cleaning with soap and warm water to ensure its long lasting beauty. A soft bristle brush can be used on any tough to clean stains. Stainless steel hardware is used in the assembly of these products and should be rinsed regularly with fresh water if being used in a coastal environment.