Résumé du contenu de la page N° 1
COMPONENT
™
#690088-UNISOURCE
MODEL 840442
19.2V BATTERY-OPERATED
RECIPROCATING SAW
INSTRUCTION MANUAL
BATTERIES AND
CHARGERS
SOLD SEPARATELY
Conforms to Std. UL745-3,
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
UL745-4-11
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
FOR CUSTOMER SERVICE
IF
Résumé du contenu de la page N° 2
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 TABLE OF CONTENTS SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 3
WORK AREA WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Keep your work area clean and well lit. Cluttered work benches and dark work CAUTION indicates a potentially hazardous areas may cause accidents or injury. situation which, if not avoided, may result in minor or moderate injury. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which ma
Résumé du contenu de la page N° 4
PERSONAL SAFETY When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can Stay alert, watch what you are doing, and use common sense when operat- make a connection from one terminal to another. Shorting the battery termi- ing a power tool. Do not use tool while tired or under the influence of drugs, nals together may cause sparks, burns or a fire. alcohol or medication. A moment of inattention while
Résumé du contenu de la page N° 5
SYMBOLS When using the Cordless Reciprocating Saw, always maintain a firm grip on IMPORTANT: Some of the following symbols may be used on your tool. Please the tool with both hands. Never put your hands or feet in the cutting area. Do study them and learn their meaning. Proper interpretation of these symbols will not grasp the tool or place your hands too close to the blade. Keep your hands allow you to operate the tool better and safer. well away from the blade. Never reach underneath the tool
Résumé du contenu de la page N° 6
FUNCTIONAL DESCRIPTION Use only Kawasaki™ 19.2V Battery Pack #691034 or 3 #691240 with the One Hour Charger #690507. CONTROLS AND COMPONENTS: 2 1. Saw Shoe 2. Trigger Switch 3. Lock-Off Button 1 4. Rubber Grip The battery is not fully charged. 5. Allen Wrench Charger #690072/Adapter #690074 - Before first use, the battery pack requires 8-10 hours charge time to be fully charged. Subsequent recharging 7 ACCESSORIES: 4 needs 3-5 hours for the battery to be fully charged. 6. Wood Cutting Blade One
Résumé du contenu de la page N° 7
REMOVING / ATTACHING BATTERY PACK CHARGING BATTERY PACK USING CHARGER #690072 / ADAPTER #690074 BATTERY PACK REMOVE BATTERY PACK: CHARGE BATTERY PACK: 1. Press both release 1. Make sure the trigger on buttons on either the Cordless Reciprocating 120V AC side of the Cordless Saw is in the “OFF” posi- ADAPTER Reciprocating Saw to tion and remove the battery release the battery pack. pack from the Cordless Reciprocating Saw. 2. Pull battery pack free of RELEASE BUTTON Cordless Reciprocating Saw.
Résumé du contenu de la page N° 8
The battery pack and charger heat during charging. Place the charger on a flat, ATTACHING / REMOVING BLADE non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack. Failure to remove the battery pack from the saw before When the battery pack requires recharging, a 1 hour charge allows the tool to removing the blade could result in accidental starting and serious personal operate at full power.
Résumé du contenu de la page N° 9
OPERATING THE RECIPROCATING SAW Never tape the trigger switch down to provide continuous high speed. The tool may fail under such conditions causing fire or personal injury. The lock-off button helps prevent accidental starting. This button can be pressed from either side. • Put on eye protection. • Clear the saw of any foreign material. VARIABLE SPEED TRIGGER SWITCH • Make sure the work piece is held TRIGGER LOCK-ON securely in place. Hold smaller pieces SWITCH BUTTON in a vise or attach to the
Résumé du contenu de la page N° 10
• Set the shoe against the work piece. MAINTENANCE AND CLEANING • When the blade reaches full speed, slowly feed the blade into the work piece. Always remove the battery pack before attempting METAL CUTTING cleaning or maintenance. Never use gasoline or any flammable liquid as a This Cordless Reciprocating Saw is lubricated before lubricant. Sparking from the motor may cause it to ignite into flames. it leaves the factory. This lubrication should last for the life of the tool. No further lubr
Résumé du contenu de la page N° 11
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS TOOL CURRENT RATING CONDUCTOR SIZE IN A.W.G Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would AMPERE 10FT. 25FT. 50FT. 100FT. like further information on the following products, please contact Alltrade Customer 3-6 18 18 18 18 Service Department at 1-800-590-3723. 6-8 18 18 18 16 Cordless Drills/Screwdrivers 8-10 18 18 18 14 Impact Wrenches 10-12 16 16 14 14
Résumé du contenu de la page N° 12
item and/or part will be repaired and/or replaced. If the unit is repaired, new or 2 YEAR LIMITED HOME USE WARRANTY reconditioned replacement parts may be used. If Alltrade chooses to replace Express and Exclusive Limited Home Use Warranty to Original Retail Buyer the product, it may replace it with a new or reconditioned one of the same or Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail comparable design. The repaired or replaced unit will be warranted un
Résumé du contenu de la page N° 13
Warranty Disclaimers REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF REPRESENTATIONS BY ALLTRADE
