Résumé du contenu de la page N° 1
74388pr-0921.qrk 7/13/01 1:38 PM Page 1
Jeep
Wrangler ®
Product features may
vary from the picture above.
Please read this manual and save it with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver, Hammer, Slotted Screwdriver,
and Safety Scissors (tools not included).
® ®
Use only with a Power Wheels Type H 6 Volt Battery, a Power Wheels 25 Amp Fuse
®
and a Power Wheels Type H 6 Volt Charger (all included).
Jeep and the Jeep grille design are trademarks of Daiml
Résumé du contenu de la page N° 2
74388pr-0921.qrk 7/13/01 1:38 PM Page 2 Table of Contents A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 C Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 3
74388pr-0921.qrk 7/13/01 1:38 PM Page 3 Warnings B ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE ® - Do not bypass a Power Wheels fuse. It is a safety device. ® - Use only a Power Wheels 25 Amp fuse. - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery, fuse or charger could cause a fire or
Résumé du contenu de la page N° 4
74388pr-0921.qrk 7/13/01 1:38 PM Page 4 Parts C • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. G
Résumé du contenu de la page N° 5
74388pr-0921.qrk 7/13/01 1:38 PM Page 5 Parts Microphone 6 Volt Charger 6 Volt Battery Shifter 25 Amp Fuse - 1* Traction Band - 4 Key Assembly Radio Dial Gas Cap Assembly Steering Wheel Cap Radio Knob - 2 Not Shown: Label Sheets - 2 #8 x 1" Screw - 12 1 #6 x /2" Screw - 11 Cap Nut – 2* #8 x 18 x 1" Screw - 2 1 #6 x 1 /2" Screw - 2 All Shown Actual Size *For your convenience, an extra 25 amp fuse and cap nut are included. 5 6-VOLT CHARGER ®
Résumé du contenu de la page N° 6
74388pr-0921.qrk 7/13/01 1:38 PM Page 6 Parts Diagram D 34 31 15 16 9 30 32 18 34 25 4 19 24 27 5 31 31 10 21 20 33 26 23 33 34 14 22 28 1 34 13 3 29 34 17 6 7 8 2 11 11 12 30 Note: Some of the parts shown are assembled to both sides of the vehicle. 13. Gas Cap Assembly 25. Steering Wheel Top 1. Vehicle Body 14. Battery Clamp (Engine Cover) 26. Shifter 2. Steering Column 15. Windshield 27. Key Assembly 3. Grille 16. Windshield Frame 28. 25 Amp Fuse 4. Sport Bar 17. Dash 29. Type H 6 Volt Ba
Résumé du contenu de la page N° 7
74388pr-0921.qrk 7/13/01 1:38 PM Page 7 Battery Charging E ELECTRICAL HAZARD WARNING CAUTION • Battery can fall out and injure a child Use the charger in dry locations only. if vehicle tips over. Always use battery clamp. Important Notes • PREVENT FIRE ® • Your new battery must be charged for at least - Do not bypass a Power Wheels fuse. 18 hours before you use it in your vehicle for the It is a safety device. first time. ® - Use only a Power Wheels 25 Amp fuse. • The battery must be remove
Résumé du contenu de la page N° 8
74388pr-0921.qrk 7/13/01 1:38 PM Page 8 Battery Charging 1 3 25 Amp Fuse ® • Insert a Power Wheels 25 amp fuse into the battery. Note: The top of the fuse will not be flush with the top of the • Plug the charger into a standard 120 volt wall outlet. battery when properly installed. Note: If power flow to the wall outlet is controlled by a switch, make sure the switch is ON. • Before first time use, charge the battery for at least 18 2 hours. Never charge the battery longer than 30 hours. Bat
Résumé du contenu de la page N° 9
74388pr-0921.qrk 7/13/01 1:38 PM Page 9 Assembly F Steering 3 WARNING Column Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical Guide items. Care should be taken in unpacking Steering and assembly of the vehicle. Children Linkage should not handle parts, including the battery, or help in assembly of the vehicle. Inset 1 Square Steering Opening Vehicle Column Body Guide Bottom View Dash • Position the vehicle body on its
Résumé du contenu de la page N° 10
74388pr-0921.qrk 7/13/01 1:38 PM Page 10 Assembly Steering Wheel Cap Radio Knobs 5 8 Steering Wheel Shifter Activity Panel • Fit the steering wheel cap into the center of the steering • From the front of the activity panel, insert and “snap” the wheel with the screw holes aligned in the steering wheel radio knobs. cap and the steering wheel. • With the wide part of the shifter handle outward, insert • Insert two #8 x 1" screws through the holes in the and snap the shifter into the activity
Résumé du contenu de la page N° 11
74388pr-0921.qrk 7/13/01 1:38 PM Page 11 Assembly 11 13 Windshield Hole Microphone Slot Frame Windshield Plastic Tip • Fit the windshield into the windshield frame. 1 • Insert five #6 x /2" screws through the holes in the windshield and into the windshield frame. • Tighten the screws with a Phillips screwdriver. Do not over-tighten. Windshield • Bend the plastic tip at the end of the microphone cord to 14 form a “T”. • Insert the plastic tip into the small hole in the left side of the vehicl
Résumé du contenu de la page N° 12
74388pr-0921.qrk 7/13/01 1:38 PM Page 12 Assembly 16 18 Hood Grille Sport Bar Sport Bar Cover (BAC) Holes • Lift the hood. • Fit the tabs at the bottom of the grille into the slots in the vehicle body. • Press near the top of the grille to “snap” it into the • Position the sportsbar, as shown. Fit the sport bar cover vehicle body. marked “BAC” to the back of the sport bar. • Lower the hood. • Align the holes in the sport bar with the holes in the sport bar cover. 1 • Insert two #6 x 1 /2" s
Résumé du contenu de la page N° 13
74388pr-0921.qrk 7/13/01 1:38 PM Page 13 Assembly 19 21 Screw Tips Tether Sport Bar Cover (RON) Gas Cap Sport Bar Assembly • Face the back end of the vehicle. • With the gas cap tether downward, insert and “snap” the gas cap assembly into the square opening in the back end of the vehicle. • Align the tips of the screws with the holes in the other sport bar cover marked RON. Fit the two sport bar covers together. Taillight Lens 22 • Tighten the screws with a Phillips screwdriver. Taillight Do
Résumé du contenu de la page N° 14
74388pr-0921.qrk 7/13/01 1:38 PM Page 14 Assembly Battery Clamp 23 25 (Engine Cover) Spark Plug Rear of Wire Set Vehicle Spark Plug Body Wire End Hole Taillight • Face the back end of the vehicle. • Align the holes in the taillight with the holes in the vehicle body. •“Snap” the center of the spark plug wire set onto the • Insert two #8 x 1" screws through the holes in the taillight battery clamp (engine cover). and into the vehicle body. • Fit each of the spark plug wire ends into the hol
Résumé du contenu de la page N° 15
74388pr-0921.qrk 7/13/01 1:38 PM Page 15 Label Decoration G Proper label application will help to keep the labels looking their best! Keep the following guidelines in mind when applying the labels: 7 • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. 16 • Place the labels exactly as shown in the illustrations. Note: Labels 21 (headlights), 16, 28 (radio knob) and 23 (shifter) are app
Résumé du contenu de la page N° 16
74388pr-0921.qrk 7/13/01 1:38 PM Page 16 Battery Installation and Battery Clamp H (Engine Cover) Assembly ® IMPORTANT! Use only a Power Wheels Type H 6 Volt bat- ® tery with a Power Wheels 25 amp fuse installed. Use of 3 any other battery or fuse will damage your vehicle. Make sure that you charge the battery for at least 18 hours using ® the enclosed Power Wheels Type H 6 Volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use o
Résumé du contenu de la page N° 17
74388pr-0921.qrk 7/13/01 1:38 PM Page 17 Battery Care and Disposal I Care Disposal ® If a battery leak develops, avoid contact with the leaking • Your Power Wheels battery is a sealed lead-acid acid and place the damaged battery in a plastic bag. Refer battery. It must be recycled or disposed of in an environ- to the information on this page for proper disposal. mentally sound manner. • Do not dispose of a lead-acid battery in a fire. The battery If acid comes in contact with skin or eyes,
Résumé du contenu de la page N° 18
74388pr-0921.qrk 7/13/01 1:38 PM Page 18 Rules for Safe Driving J RIDING HAZARD WARNING y Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas These areas must be: Use vehicle on generally level ground ONLY! - away from swimming pools and other bodies of water to prevent drownings 7. Do not allow your child to drive on sloped or inclined - generally level to prevent tipovers surfaces. Restrict your child’s driving to generally - away fr
Résumé du contenu de la page N° 19
74388pr-0921.qrk 7/13/01 1:38 PM Page 19 How to Operate Caring For L Your Vehicle K Your Vehicle IMPORTANT! Use the vehicle ONLY outdoors. Most • Check all screws, cap nuts and protective coverings regularly and tighten as required. Check plastic parts on interior flooring can be damaged by riding this vehicle a regular basis for cracks or broken pieces. indoors. Fisher-Price will not be responsible for damage to floors if vehicle is used indoors. • During snowy or rainy weather, the vehic
Résumé du contenu de la page N° 20
74388pr-0921.qrk 7/13/01 1:38 PM Page 20 Problems and Solutions Guide N IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions ® Guide below. If you still experience a problem, please contact Power Wheels Consumer Relations, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday. Or, contact your ® local Power Wheels authorized service center. For the location nearest you, please refer to the Authorized Service Center list begi
