Instruction d'utilisation Invacare Silhouette 3002937

Résumé du contenu de la page N° 1

SILHOUETTE™ INSTALLATION INSTRUCTIONS
Assembly, Installation, and Operating Instructions
NOTE: Check all parts for shipping damage. In case of ship-
WARNING (continued)
ping damage, DO NOT use. Contact equipment supplier for
All cushions used for the prevention or treatment of
further instruction.
decubitus ulcers (pressure sores) should be selected
carefully. Working with your therapist, physician and
SAFETY SUMMARY
cushion supplier is the best way to assure that a cush-
WARNING
ion choice matc

Résumé du contenu de la page N° 2

NOTE: Make sure Quick-Lock Brackets (mounting brackets INSTALLING MOUNTING BRACKETS with locking tabs) are mounted at the TOP of the back canes. ONTO BACK CANES (FIGURE 1) NOTE: Make sure the mounting brackets are positioned BE- 1. Determine diameter tubing of the wheelchair back canes. HIND the back canes. 2. Refer to DETAIL "A" for the corresponding holes in the CAUTION straps for the required diameter tubing. DO NOT over tighten the clamp blocks to the back 3. Remove the two (2) phillips scre

Résumé du contenu de la page N° 3

Adjustable Mounting Bracket Guide NOTE: If the wheelchair seating surface has neither hook or loop attachment strips, remove the double sided hook from Adjustable Mounting Bracket the bottom of the cover. Socket Cap Screws 3. Align the front edge of the cushion with the front edge of seating surface. WARNING Kwik Fit Back Make sure the cushion is securely fastened to the Slot wheelchair seating surface with the hook and loop fasteners BEFORE using. Exercise caution when Adjustable Mounting Exten

Résumé du contenu de la page N° 4

Keep ALL parts dry and away from chemicals or lubricants. WARNING 1. Weekly cleaning is recommended. DO NOT continue to use this product if any of the fol- lowing problems as described are discovered. Cor- 2. To clean the water repellant foam coating, use a soft cloth rective maintenance can be performed at or ar- and wipe clean with warm water and a mild soap solu- ranged through your equipment supplier. tion. Rinse off and dry. CAUTION 2. Visually inspect all parts weekly, including hardware,