Résumé du contenu de la page N° 1
FC2145
FC2145S
BC2145
FC2145W
Operator′′ ′′s manual English
CC2145
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Résumé du contenu de la page N° 2
15 m 50FT KEY TO SYMBOLS Symbols Wear sturdy, non-slip boots. WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read Only use non-metallic, flexible and understand the contents of the cutting attachments, i.e. trimmer operator’s manual. heads with trimmer cord. Please read the operator’s manual carefully and make sure you under
Résumé du contenu de la page N° 3
CONTENTS Maintenance schedule .......................................... 33 Contents TECHNICAL DATA KEY TO SYMBOLS Technical data ....................................................... 34 Symbols ................................................................ 2 EC-declaration of conformity ................................ 37 CONTENTS Contents ............................................................... 3 Note the following before
Résumé du contenu de la page N° 4
INTRODUCTION Dear Customer, Congratulations on your choice to buy a Jonsered product! We are convinced that you will appreciate with great satisfaction the quality and performance of our product for a very long time to come. The purchase of one of our products gives you access to professional help with repairs and service whenever this may be necessary. If the retailer who sells your machine is not one of our authorised dealers, ask for the address of your nearest service work
Résumé du contenu de la page N° 5
WHAT IS WHAT? 3 8 32 31 517 7 9 33 10 4 18 35 19 6 13 11 20 22 1 23 14 12 34 34 15 4 4 21 21 16 36 3 2 2 26 25 30 27 28 29 24 What is what on the brush cutter? (BC 2145) 1 Grass blade 19 Support cup 2 Grease filler cap, bevel gear 20 Support flange 3 Bevel gear 21 Drive disc 4 Cutting attachment guard 22 Trimmer head 5 Shaft 23 Spark plug cap and spark plug 6 Handlebar 24 Socket spanner 7 Throttle control 25 Operator′s manual 8 Stop switch 26 Transport guard for cutting equipment 9 Th
Résumé du contenu de la page N° 6
WHAT IS WHAT? 8 3 7 8 9 7 18 5 32 9 17 4 10 30 13 18 11 19 6 21 1 14 12 15 20 4 16 23 31 3 2 29 22 24 28 25 26 27 What is what on the brush cutter? (FC 2145, FC 2145 S, FC 2145 W) 1 Saw blade 17 Handle adjustment 2 Grease filler cap, bevel gear 18 Locking nut 3 Bevel gear 19 Support flange 4 Cutting attachment guard 20 Drive disc 5 Shaft 21 Spark plug 6 Handlebar 22 Socket spanner 7 Throttle control 23 Operator′s manual 8 Stop switch 24 Transport guard for cutting equipment 9 Throttl
Résumé du contenu de la page N° 7
WHAT IS WHAT? 8 3 32 31 5 7 9 17 4 33 10 6 13 11 31 22 23 18 1 20 14 12 19 15 34 20 16 4 4 21 1 35 21 34 3 2 3 2 21 4 3 2 25 26 30 27 28 29 24 What is what on the brush cutter? (CC 2145) 1 Blade 19 Support cup 2 Grease filler cap, bevel gear 20 Support flange 3 Bevel gear 21 Drive disc 4 Cutting attachment guard 22 Trimmer head 5 Shaft 23 Spark plug cap and spark plug 6 Handlebar 24 Socket spanner 7 Throttle control 25 Operator′s manual 8 Stop switch 26 Transport guard 9 Throttle lock
Résumé du contenu de la page N° 8
GENERAL SAFETY PRECAUTIONS Important Personal protective equipment IMPORTANT! IMPORTANT! The machine is only designed for trimming grass, grass A clearing saw, brushcutter or trimmer can be clearing and/or forestry clearing. dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It The only accessories you can operate with this engine is extremely important that you read and understand the unit are the cutting attachm
Résumé du contenu de la page N° 9
GENERAL SAFETY PRECAUTIONS BOOTS control (B). When you release the handle the throttle control and the throttle lockout both move back to their Wear boots with steel toe-caps and non-slip sole. original positions. This movement is controlled by two independent return springs. This arrangement means that the throttle control is automatically locked at the idle setting. CLOTHING B A Wear clothes made of a strong fabric and avoid loose A clothing that can catch on twigs and br
Résumé du contenu de la page N° 10
GENERAL SAFETY PRECAUTIONS be checked. See instructions under the heading Vibration damping system Maintenance. Your machine is equipped with a vibration damping system that is designed to minimize vibration and make operation easier. Use of incorrectly wound cord or an incorrect cutting attachment increases the level of vibration. See instructions under the heading Cutting equipment. The machine′s vibration damping system reduces the transfer of vibration between the engine unit/cutting
Résumé du contenu de la page N° 11
GENERAL SAFETY PRECAUTIONS cutter. Certain harnesses also have a quick release fitted If the muffler on your machine is fitted with a spark to the support hook. arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage. Check that the harness straps are correctly positioned. Once the harness and machine have been adjusted, check that the harness quick release works correctly. WARNING! Mufflers fitted with catalytic converters g
Résumé du contenu de la page N° 12
GENERAL SAFETY PRECAUTIONS operate the socket spanner when loosening or tightening WARNING! Always stop the engine the nut. before doing any work on the cutting ! attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it. WARNING! Using an incorrect cutting attachment or an incorrectly sharpened ! blade increases the risk of blade
Résumé du contenu de la page N° 13
GENERAL SAFETY PRECAUTIONS Keep the correct setting on the saw blade! Follow our A correctly sharpened blade is essential for working instructions and use the recommended setting tool. An efficiently and to avoid unnecessary wear to the blade and incorrectly set saw blade increases the risk of jamming brush cutter. and blade thrust, and damage to the saw blade. Check the cutting attachment for damage or cracks. A damaged cutting attachment should always be replaced. • Make sure that the blade
Résumé du contenu de la page N° 14
GENERAL SAFETY PRECAUTIONS Trimmer head IMPORTANT! Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration. • Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data. • Smaller machines g
Résumé du contenu de la page N° 15
ASSEMBLY machine is in a comfortable working position when it Assembling the handlebar and hangs from the harness. throttle (BC 2145, CC 2145) • Remove the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar, (see diagram). • Tighten the knob. Assembling the handlebar and throttle (FC 2145, FC 2145 S, FC 2145 W) • Align the screw hole in the throttle handle with the hole in the handlebar. • Unscrew the knob from the handlebar mounting.
Résumé du contenu de la page N° 16
ASSEMBLY machine is in a comfortable working position when it Assembling the cutting hangs from the harness. equipment WARNING! When fitting the cutting attachment it is extremely important that ! the raised section on the drive disc/ support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury. Transport position, handlebar • The handlebar can easily be turned to fit alon
Résumé du contenu de la page N° 17
ASSEMBLY • Centre the metal cup (P) on the drive disc’s blade Fitting the blade guard and saw guide. blade • Turn the output shaft until one of the holes in the drive disk aligns with the corresponding hole in the gear housing. • Insert the locking pin (C) in the hole to lock the shaft. • The blade guard (A) is fitted using 4 screws (L) as • Position the blade (D) with the drive disk (B). Make shown. sure that the blade is centered by fitting it to the guide on the drive disk. L • Fit the s
Résumé du contenu de la page N° 18
ASSEMBLY spanner with a shaft that is long enough to allow this. The • Screw on the trimmer head (H) in the opposite arrow in the diagram shows the area where you should direction to the direction of rotation. operate the socket spanner when loosening or tightening the nut. H C • Tighten the trimmer head to a torque of 35-50 Nm (3.5-5 kpm). • To dismantle, follow the instructions in the reverse order. Fitting the trimmer guard and Fitting other guards and cutting trimmer head Trimmy SII at
Résumé du contenu de la page N° 19
ASSEMBLY • Screw on the trimmer head/plastic blades (H) in the Adjust the height using the strap on the harness for opposite direction to the direction of rotation. the support hook. • To dismantle, follow the instructions in the reverse order. Adjusting the harness and brush cutter WARNING! When using a brush cutter it must always be hooked securely to the ! harness. Otherwise you will be unable to control the brush cutter safely and this can result in injury to yourself or others. 2 Gra
Résumé du contenu de la page N° 20
ASSEMBLY 2 Tighten the chest strap under your left arm so that it 6 The elastic strap (B) can be tightened to transfer more fits closely around your body. load from the shoulder straps to the hip strap. 3 Adjust the shoulder strap to distribute the load evenly across your shoulders. Press downwards on the suspension hook to load the harness. Correct balance 1 Forestry clearing The machine is balanced by moving the suspension ring on the machine forwards or backwards. On some models the suspe
