Résumé du contenu de la page N° 1
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
ITEM 69342
1600W HEAVY DUTY
HEAT GUN
visit our website at: http://www.harborfreight.com
e
Résumé du contenu de la page N° 2
SaFetY Setup OpeRatiOn maintenanCe t able of Contents Safety ......................................................... 2 Maintenance .............................................. 10 Specifications ............................................. 8 Parts List and Diagram .............................. 11 Setup .......................................................... 8 Warranty .................................................... 12 Operation .................................................... 9
Résumé du contenu de la page N° 3
electrical safety 1. power tool plugs must match the outlet. 4. Do not abuse the cord. never use the cord for never modify the plug in any way. carrying, pulling or unplugging the power tool. Do not use any adapter plugs with grounded Keep cord away from heat, oil, sharp edges power tools. Unmodified plugs and matching or moving parts. Damaged or entangled outlets will reduce risk of electric shock. cords increase the risk of electric shock. 2. avoid body contact with grounded surfaces
Résumé du contenu de la page N° 4
SaFetY Setup OpeRatiOn maintenanCe Service have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. heat Gun Safety Warnings 1. Hidden areas behind walls, ceilings, floors, e. Children, pregnant or potentially pregnant soffit boards, and other panels may contain women, and nursing mothers should not flammable materials that could be ignited by be present in the work area until the wor
Résumé du contenu de la page N° 5
heat Gun Safety Warnings (cont.) 7. Do not use the Heat Gun near flammable materials. • Properly maintain and inspect to avoid electrical shock. 8. Do not point the Heat Gun at people or • Properly ground power cord. Ground Fault Circuit animals. The intense heat can injure them. Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock. 9. Do not touch the tube of the heating element or the Nozzle when they are hot. They 18. WARNING: Some dust created by
Résumé du contenu de la page N° 6
SaFetY Setup OpeRatiOn maintenanCe Grounding tO pRevent eleCtRiC ShOCK anD Death FROm inCORReCt GROunDinG WiRe COnneCtiOn: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. if damaged, have it repaired by a service facility before use. if the plug will not fit the outlet, h
Résumé du contenu de la page N° 7
extension Cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. 8. Protect the extension cords from sharp objects, Using exte
Résumé du contenu de la page N° 8
SaFetY Setup OpeRatiOn maintenanCe Specifications Electrical Rating 120V~ / 60Hz / 13A Maximum Temperature 1100°F 4002205 Setup - Before use: Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO pRevent SeRiOuS injuRY FROm aCCiDental OpeRatiOn: t urn the power Switch of the tool off and unplug the tool from its electrical outlet before assembling or making any adjustments to
Résumé du contenu de la page N° 9
Operating instructions Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO pRevent SeRiOuS injuRY : always wear thermally insulated gloves, rated to at least 1200° F, when working directly with pieces by hand. Workpiece and Work area Set up 1. Designate a work area that is clean and well- 3. Secure loose workpieces using a vise or clamps lit. The work area must not allow ac
Résumé du contenu de la page N° 10
SaFetY Setup OpeRatiOn maintenanCe maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO pRevent SeRiOuS injuRY FROm aCCiDental OpeRatiOn: t urn the power Switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. tO pRevent SeRiOuS injuRY FROm t OOl F ailuRe: Do not use damaged equipment. if abnormal noise or vibration occurs, hav
Résumé du contenu de la page N° 11
parts list and Diagram part Description Qty part Description Qty 1 Nose Cone 1 20 Switch 1 2 Air Duct 1 21 Switch Board 1 3 Pad 1 22 Handle 1 4 Heat Element 1 23 Wire Strain Plate 1 5 Under Pan 1 24 Sheath 1 6 Block 1 25 Power Cord 1 7 Knob 1 26 Screw 4x8 6 8 Vent Cover 1 27 Screw 4x8 2 9 Left Housing 1 28 Screw 3x12 1 10 Spring 1 29 Screw 3x6 1 11 End Stop 1 30 Screw 3x8 1 12 Nut 1 31 Screw 3x6 4 13 Fan 1 32 Screw 4x6 2 14 Motor 1 33 Screw 3x13 3 15 Cord Stop 1 1 34 Terminal Block 1 16 Cord Sto
Résumé du contenu de la page N° 12
pleaSe ReaD the FOllOWinG CaReFull Y THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACE
