Résumé du contenu de la page N° 1
Gefen
1:4 Splitter
®
for HDMI
GTB-MHDMI1.3-144
GTB-MHDMI1.3-144-BLK
User Manual
www.gefentoolbox.com
Résumé du contenu de la page N° 2
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday, Pacifi c Time Write To: Gefen, LLC. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefentoolbox.com support@gefentoolbox.com Notice Gefen, LLC reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 1:4 Splitter for HDMI is a trademark
Résumé du contenu de la page N° 3
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The GefenToolBox 1:4 Splitter for HDMI 7 EDID Management 7 EDID Mode Selection 8 Audio Channel Selection 9 External EDID Management 10 Internal EDID Specifi cation 11 Fast Switching Technology 12 Wall Mounting Instructions 13 Specifi cations 14 Warranty
Résumé du contenu de la page N° 4
INTRODUCTION Congratulations on your purchase of the GefenToolBox 1:4 Splitter for HDMI. Your complete satisfaction is very important to us. About Gefen We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line. Please visit http://www.gefen.com for the latest offerings in High-Defi nition signal solutions or call us between the
Résumé du contenu de la page N° 5
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE GEFENTOOLBOX 1:4 SPLITTER FOR HDMI • EDID contains the A/V capabilities of a display device in regards to video resolutions and audio formats supported. This information is used by the source device to determine the format of the A/V signal it outputs. The GefenToolBox 1:4 Splitter for HDMI has advanced EDID management features to ensure complete compatibility with all sources and display devices. See pages 7-10 for more
Résumé du contenu de la page N° 6
FEATURES HDMI 1.3 Features • 225 MHz (up to 12 bit YUV 444 @ 1080p) • Deep Color • Dolby TrueHD and DTS-HD Master Audio • Lip-Sync Features • Simultaneously displays a single Hi Def source on up to four (4) HDTV displays without signal loss. • Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p and 1920x1200@60 Hz. • 3DTV Pass-Through • Fast Switching Technology for quick and responsive HDMI signal routing. • Auto-EDID Management for rapid integration of sources a
Résumé du contenu de la page N° 7
PANEL LAYOUT 1 2 3 7 4 5 6 4
Résumé du contenu de la page N° 8
PANEL DESCRIPTIONS 1 HDMI Output Ports 1-4 Connect HDMI-compliant display device(s) to any of these output ports. 2 Audio Channel Selection Switch This switch will modify the EDID to specify the number of supported audio channels when using the INTERNAL EDID mode. This setting will not affect the EDID information when using the EXTERNAL EDID mode. 3 EDID Mode Selection Switch This switch will control the location of the EDID that will be sent to the source device. The options are EXTERNAL an
Résumé du contenu de la page N° 9
CONNECTING AND OPERATING THE GEFENTOOLBOX 1:4 SPLITTER FOR HDMI How to Connect the GefenToolBox 1:4 Splitter for HDMI 1. Use the supplied HDMI cable to connect the source device to the HDMI input port of the GefenToolBox 1:4 Splitter for HDMI. 2. Use additional user-supplied HDMI cables to connect up to 4 HDMI- compliant displays to the output ports on the 1:4 Switcher for HDMI. 3. Connect the included 5V DC power supply to the power receptacle on the Splitter. 4. Connect the other end of the
Résumé du contenu de la page N° 10
EDID MANAGEMENT EDID Mode Selection 1. EXTERNAL MODE: See page 9 for details on using the External EDID. 2. INTERNAL MODE: In Internal EDID Mode, a generic EDID is used for all connected devices. This is useful when suffi cient EDID data is unavailable from display devices or EDID-related problems are encountered. The generic EDID is compatible with most A/V equipment on the market. Set the EDID Mode Switch on the front panel to the INT position. This mode uses a standard, pre-programmed
Résumé du contenu de la page N° 11
EDID MANAGEMENT Audio Channel Selection The GefenToolBox 1:4 Splitter for HDMI features a switch that will modify the supported audio formats listed in the pre-programmed EDID. This feature is useful for limiting the output of the source device to either 2 or multi-channel audio formats. NOTE: This selector switch will only affect the pre-programmed EDID in the INTERNAL (INT) EDID Mode. The GefenToolBox 1:4 Splitter for HDMI can use either of the following settings for audio format suppor
Résumé du contenu de la page N° 12
EDID MANAGEMENT External EDID Management The GefenToolBox 1:4 Splitter for HDMI features EDID Management. Before the source can send video or audio signals to the display, the source devices reads the EDID (Extended Display Identifi cation Data) of each device connected to an output. The EDID contains information about what type of A/V data that the source can send to each display. GefenToolBox 1:4 Splitter for HDMI distributes a single source to multiple output devices. This involves rea
Résumé du contenu de la page N° 13
EDID MANAGEMENT Internal EDID Specifi cations The table below lists the settings that comprise the built-in Internal EDID data structure: Video Data Block Audio Data Block Speaker xvYCC Allocation 1080p@60Hz 2-channel: 2-channel: xvYCC 709 1080p@50Hz LPCM 2CH FL/FR xvYCC 601 1080i@60Hz (native) Multi-channel: Multi-Channel: 1080i@50Hz LPCM 2CH RLC/RRC LPCM 8CH RL/RR AC-3 6CH FC DTS 7CH LFE Dolby Digital+ 8CH FL/FR Dolby TrueHD 8CH DTS-HD 8CH MAT(MLP) 8CH 10
Résumé du contenu de la page N° 14
FAST SWITCHING TECHNOLOGY FAST SWITCHING TECHNOLOGY Fast Switching Technology Fast Switching Technology (FST) is a Gefen software implementation for HDMI 1.3 products. FST was created to improve the inherited lengthy HDMI authentication process, based on the HDMI and HDCP specifi cations. FST provides quicker A/V source switching and greatly improves the overall A/V system behavior and performance when more than one HDTV display is used in the system setup. FST allows connecting / disconnect
Résumé du contenu de la page N° 15
WALL MOUNTING INSTRUCTIONS The GefenToolBox 1:4 Splitter for HDMI should be mounted vertically in a wall or cabinet with wood/drywall screws as shown in the diagram above. There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for insertion and retraction of cables at the HDMI connectors. For installation on a drywall surface, use a #6 drywall screw. It is recommended when installing on a drywall surface th
Résumé du contenu de la page N° 16
SPECIFICATIONS Single Link Bandwidth ............................................................................. 225 MHz Pixel Clock / Speed .................................................................................. 165 MHz Maximum Video Resolution ................................... 1080p, 1920x1200@60Hz, 2K Input Video Signal .............................................................................. 1.2 volts p-p Input DDC Signal ................................................
Résumé du contenu de la page N° 17
14
Résumé du contenu de la page N° 18
Résumé du contenu de la page N° 19
Rev C2 1.1A 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefentoolbox.com support@gefentoolbox.com Pb
