Instruction d'utilisation Flymo EASICUT 500CT

Résumé du contenu de la page N° 1

®
EASICUT
500CT
Original Instructions
IMPORTANT INFORMATION
Read before use
& retain for future reference

Résumé du contenu de la page N° 2

Carton Contents Switch Levers Handguard instruction manual blade cover Battery Pack Charger Cradle Charger IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK 1800 882 350 ROI Fax : 01325 302530 Safety If not used properly this product can be dangerous! This product can cause serious injury to the operator and others, the warnings

Résumé du contenu de la page N° 3

e) When operating a power tool outdoors, use an exten- 5. Battery tool use and care sion cord suitable for outdoor use. Use of a cord suit- a) Recharge only with the charger specified by the man- able for outdoor use reduces the risk of electric shock. ufacturer. A charger that is suitable for one type of f) If operating a power tool in a damp location is un- batter pack may create a risk of fire when used with avoidable, use a residual current device (RCD) another battery pack. protected supply

Résumé du contenu de la page N° 4

Power tool use and care Battery 1. Know how to stop the product quickly in an emer- Cordless Battery Powered Products require special care. gency. 1. AVOID ACCIDENTAL STARTING 2. Never hold the product by the guard. KEEP HANDS AND FINGERS AWAY FROM THE 3. Never operate the product with damaged guards or SWITCH LEVER WHILE CARRYING THE PROD- without guards in place. UCT. 4. Do not use stepladders whilst operating the product. 2. Always charge the product indoors and store in a 5. Use the product

Résumé du contenu de la page N° 5

Charging the Battery B Initial Charging Procedure 1. Use the charger indoors only. 2. Ensure the charger is not exposed to moisture. Keep the charger and the product dry at all times. 3. Connect the charger cable to the Charger Cradle (B1). 2 and plug the Charger into a suitable household electri- cal wall socket and switch on (B2).. 4. Place the Battery Pack into the Charger Cradle.(C). 5. The red indicator lamp glows continuously during charging.(C1) 1 6. Full charge will be achieved in 5-

Résumé du contenu de la page N° 6

How to Use How to Use your Hedgetrimmer 1. Inspect area to be cut before each use - re- H move objects which can be thrown or be- come entangled in the cutting blades. 2. Always keep the Hedgetrimmer in front of your body. Hold handle firmly with both hands and stand in a secure and stable position. 3. Allow the cutting blades to reach full speed before entering the material to be cut. 4. Always work going away from people and solid objects such as walls, large stones, trees, vehicles etc. 5. I

Résumé du contenu de la page N° 7

Fault Finding Hints Cutting blade stops under load Poor cut quality 1. Cut at a slower pace. 1. Ensure the product is being used correctly (see 2. Recharge Battery. How to Use) 3. If cutting blade still stops under load? 2. Ensure blades are free from trapped debris Immediately remove the Battery Pack and con- 3. Damaged Blades? sult your local approved Service Centre. Immediately remove the Battery Pack and consult Fails to stop when one switch lever is released. your local approved Service Cen

Résumé du contenu de la page N° 8

Service Recommendations 1. We strongly recommend that your product is serv- 6. Should it be necessary for work to be carried out by your iced at least every twelve months, more often in a Service Centre, it is important to take your complete ma- professional application. chine including cable and any extension cables used. 2. Always use genuine Husqvarna Spare Parts. A network of specialist dealers can be found in your local 3. Prepacked spares are available from most Husq- Yellow Pages. To obt