Instruction d'utilisation Fisher-Price R0322

Résumé du contenu de la page N° 1

P6831
R0322
www.fisher-price.com

Résumé du contenu de la page N° 2

Consumer Information • Please keep this instruction sheet for future reference, as it contains important information. WARNING • Adult assembly is required. To avoid serious injury: • Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). • Adult supervision is required. • Age: 2-5 years • Never use near cars and other motor • Weight limit: 55 lbs (25 kg). vehicles, near streets, steps, sloped • Please save all packaging material until assembly is

Résumé du contenu de la page N° 3

Parts Note: Some parts shown are assembled to both sides of the trike. Handlebar Front Handlebar Back Upper Steering Ring Lower Steering Ring Frame Fork Seat Front Wheel Assembly 2 Fork Covers Seat Pin 4 Pedal Hubs Rear Axle 2 Pedal Blocks Part not shown: Label Sheet 2 Rear 2 Rear 2 Rear Wheel Hubs Wheels Wheel Caps .354" 1 #8 x 2¼" Screw - 1 #8 x ¾" Screw - 6 #6 x /2" Screw - 2 .354" Cap Nut - 2* ALL FASTENERS SHOWN ACTUAL SIZE *We’ve included one extra .354" cap nut for your convenience. N

Résumé du contenu de la page N° 4

Assembly Rear Wheel (Indented Rear Wheel Side Down) (Flat Side First) Rear Wheel Hub (Flat Side Down) Rear Axle Rear Wheel Hub (Pointed End First) 3 Rear Axle • Turn the assembly upright. • Slide a rear wheel, rounded side fi rst, onto the end of the rear axle. • Slide a rear wheel hub, pointed end fi rst, onto the end of the rear axle. 1 • Slide a rear wheel hub, rounded side up, onto the rear axle. • Slide a rear wheel, indented side down, onto the rear axle. Frame Rear Axle Assembly Botto

Résumé du contenu de la page N° 5

Assembly Fork Arms Front Wheel Assembly Groove Rear Wheel Hub Fork Cover Pedal Axle 7 Rear Wheel Cap 5 • Place the front wheel assembly between the fork arms. Make sure the pedal axle fi ts into the groove at the bottom • Fit the tabs on a rear wheel cap into the slots in the rear of each fork arm. wheel hub. Push to "snap" the rear wheel cap in place. • Place a fork cover over the pedal axle on one fork arm. • Repeat this procedure to attach the other rear wheel cap • Insert two #8 x ¾" s

Résumé du contenu de la page N° 6

Assembly Fork Post Lower Steering Ring Handlebar Front Fork Post Handlebar Back ¾" Screw ¾" Screw Fork Cover 9 11 • While holding the lower steering ring in place, insert the • Fit the handlebar front to the fork post, as shown. fork post up through the hole in the neck of the frame. • Fit the handlebar back to the fork post and handlebar front. Make sure the fork is positioned so that the fork covers Hold them together fi rmly. face the rear wheels. • Insert the remaining #8 x ¾" screws thr

Résumé du contenu de la page N° 7

Assembly Seat 1 /2" Screw Seat Pin 13 14 • Fit the seat onto the frame. • Insert the seat pin into the holes in the frame. • Fit the pedal blocks onto each pedal for smaller riders. Hint: The seat is adjustable to your child's size. Have your 1 Insert a #6 x /2" screw into hole in each pedal block child sit on the seat and check the foot pedal distance. and tighten. Adjust the seat up or down for your child's comfort. • Remove the pedal blocks for bigger riders and store for future use. 7

Résumé du contenu de la page N° 8

Consumer Information IMPORTANT! It is a good practice to start training children very young regarding the importance of helmet use. When children are older and riding bicycles and faster vehicles, it is important that they use a helmet each and every time they ride. For this reason, even while riding a tricycle, it is a good idea to familiarize your child with helmet use, so that it becomes a habit for life. Choose a helmet that complies with requirements of the applicable certifying age