Résumé du contenu de la page N° 1
MUST MMUST U S TANG ANG A N G
Product features may var Product features may var Product features may vary y y
from the picture above. from the picture above. from the picture above.
Please read this manual and save it P Please read this manual and save it lease read this manual and save it
with your original sales receipt. with your original sales receipt. with your original sales receipt.
T T To ools needed for assembly: Phillips Screwdriver ools needed for assembly: Phillips Screwdriver ol
Résumé du contenu de la page N° 2
TABLE OF CONTENTS Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Parts Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 3
IMPORTANT INFORMATION ELECTRICAL HAZARD DANGER To prevent electric shock, do not immerse in water; wipe clean with a damp cloth. WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Ne ver modify the electrical system. Alterations could cause a fi re resulting in serious injury and could also ruin the electrical system. - Use of the wr ong type battery or charger could cause a fi re or explosion resulting in serious injury. ® ®
Résumé du contenu de la page N° 4
PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Rear Deck Vehicle Seat Front Bumper Bumper Su
Résumé du contenu de la page N° 5
PARTS Steering Wheel Steering Wheel Cap 12 Volt Battery 4 Hubcaps 2 Bushings 12 Volt Charger 2 Mirrors 5 1 /32" x 1 /2" Pin - 1 3 /8" -16 Lock Nut - 2 2 Mirror Covers 3 3 #8 x /4" Screw - 27 #8 x /4" Black Screw - 5 Fastener Cap Assembly Tool 1 1 /4" x 1 /4" Screw - 2 Steering Column 7 /16" Washer - 2 For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. Long Seat Belt 2 Short Seat Belts Fasteners
Résumé du contenu de la page N° 6
PARTS DIAGRAM 11 10 21 17 5 3 14 6 20 20 15 1 4 22 19 7 24 23 16 18 13 12 2 8 9 Parts Not Shown 1 Vehicle 9 Wheel Covers - 2 17 Steering Column 7 1 1 2 Front Bumper 10 Steering Wheel 18 /16" Washers - 2 Assembly Tool /4" x 1 /4" Screws - 2 3 3 Dash Assembly 11 Steering Wheel Cap 19 Long Seat Belt #8 x /4" Screws - 27 Label Sheets 3 4 Hood 12 Hubcaps - 4 20 Short Seat Belts - 2 #8 x /4" Black Screws - 5 5 1 5 Rear Deck 13 Bushings - 2 21 /32" x 1 /2" Pin 6 Seat 14 Mirrors - 2 22 12 Volt B
Résumé du contenu de la page N° 7
BATTERY CHARGING ELECTRICAL HAZARD CAUTION WARNING Use the charger in dry locations only. • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. About Thermal Fuses • PREVENT FIRE ® Your Power Wheels 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device - Ne ver modify the electrical system. which automatically “trips” and shuts down operation of the Alterations could cause a fi re resulting vehic
Résumé du contenu de la page N° 8
BATTERY CHARGING ASSEMBLY B WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. A CAUTION In the unassembled state, this package Charger contains small parts. Adult assembly Connector is required. A • Plug the charger connector into the battery . B
Résumé du contenu de la page N° 9
ASSEMBLY Front Bumper 2 Bushing Washer • Fit the front bumper to the vehicle. Front Axle 4 7 • Slide a /16" washer onto a front axle. • Fit a bushing, flat side first, onto the front axle. 3 Front Wheel Wheel Cover (Marked R) 3 • Insert six #8 x /4" screws into the front bumper and tighten. 5 Note: There is a right and left front wheel. They are marked with an R and L. • Locate the right front wheel marked with an R. Place the front wheel R, onto the front axle. • Fit a wheel cover on to the ri
Résumé du contenu de la page N° 10
ASSEMBLY E Assembly Tool 8 Lock Nut FRONT VIEW 6 3 • Insert six #8 x /4" screws into the front bumper and tighten. 3 • Fit a /8"-16 lock nut, rounded side out, onto the front axle. IMPORTANT! Tighten the lock nut firmly with the closed end of the assembly tool. Mirror • Repeat steps 4-6 to assemble the other washer, bushing, front 3 wheel and wheel cover with the remaining /8"-16 lock nut. Hubcaps Dash Assembly Mirror Cover Hubcaps 9 7 • Fit a mirror and mirror cover to an end of the dash ass
Résumé du contenu de la page N° 11
ASSEMBLY Dash Assembly Dash Connectors 12 3 • Insert four #8 x /4" screws into the dash assembly and tighten. Motor Harness Connector 10 • Position the motor harness connector toward the front of the vehicle. • Place the dash assembly upside down on top of the front end of the vehicle. • Plug the dash connector from the vehicle into the dash connector on the dash assembly. Hint: If the connectors do not fit together, do not force them. Simply turn one of them around and try again. 13 BACK VI
Résumé du contenu de la page N° 12
ASSEMBLY E 31 14 14 20 30 14 14 18 19 12 Batter Batter Battery y Compartment Door y Compartment Door Compartment Door 14 DASH VIEW • Locate the simulated radio on the dash. • Before applying the labels, wipe the surface of the vehicle with • Loosen two screws a clean, dry cloth to remove any dust or oils. on the underside of the dash to remove the simulated radio. • Place the labels exactly as shown in the illustrations. For best Set the screws aside. results, avoid repositioning a label on
Résumé du contenu de la page N° 13
ASSEMBLY Short Seat Belts Hood Seat Long Seat Belt 17 • Insert the fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the side of the seat belt with the fastener faces the outer edge of the seat. • Pull the short seat belt strap completely through the slot until 15 the last T-loop at the opposite end of the belt catches against FRONT VIEW the slot. You will pull one T-loop through the slot. • Repeat this procedure to assemble the other short s
Résumé du contenu de la page N° 14
ASSEMBLY E Steering Column 19 BACK VIEW 21 3 • Insert three black #8 x /4" screws into the back of the seat and tighten. • Wipe the steering column with a paper towel to remove any Note: You will need to remove these three screws if you change excess lubricant. the seat position later. • Insert the straight end of the steering column down through the hole in the vehicle floor and out through the hole in the dash. Steering Linkage 20 BOTTOM VIEW Steering Column S Steering Column teering Column
Résumé du contenu de la page N° 15
ASSEMBLY Fastener Cap Press Wheel 23 Lift Steering 25 Column • Fit the fastener cap onto the end of the • While pressing down on the steering wheel, grasp the steering steering column. 3 column under the dash and pull it up as far as it will go. • Insert a #8 x /4" 5 1 • Insert the /32" x 1 /2" pin through the hole in the steering column. screw through the large opening in the • Grasp the steering column again and pull down to fit the pin fastener cap and into the hole in the steering col
Résumé du contenu de la page N° 16
DECORATION • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a label, rub the label firmly with a clean, dry cloth to make sure the label is adhered to your vehicle. Start at the center of a label, and smooth towards the outer edges to remove air bubbles. 9 24 Label #25 o
Résumé du contenu de la page N° 17
DECORATION 1 23 1 3 1 2 13 16 Label #17 on the opposite side 15 21 22 10 22 10 11 Both sides BACK VIEW J4390pr-0922 17
Résumé du contenu de la page N° 18
BATTERY INSTALLATION CHARGER INDICATOR ® IMPORTANT! Use only a Power Wheels 12 volt lead-acid rechargeable battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at ® least 18 hours using the enclosed Power Wheels 12 volt Button charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions m
Résumé du contenu de la page N° 19
BATTERY CARE AND DISPOSAL Care Disposal If a battery leak develops, avoid contact with the leaking acid ® • Your Power Wheels battery is a non-spillable, sealed lead-acid and place the damaged battery in a plastic bag. See information battery. It must be recycled or disposed of in an environmentally below for proper disposal. sound manner. If acid comes in contact with skin or eyes, flush with cool • Do not dispose of a lead-acid battery in a fire. The battery may water for at least 15 min
Résumé du contenu de la page N° 20
SAFE DRIVING RULES Teach Safety Rules to Children RIDING HAZARD While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment WARNING skills are still very immature. Unsupervised driving by children can lead to serious injury. Before children use this vehicle, an adult should carefully evaluate the driving area as well as • Prevent Injuries and Deaths the children’s skill level and ability to drive this vehicle safely. • Di
