Résumé du contenu de la page N° 1
OWNER’S MANUAL
Your Pioneer 202 Metal Detector incorporates patented microprocessor-
controlled technology. The Pioneer 202 is a motion detector; movement over an
object is required in order for the machine to detect the object and emit a tone.
Alternatively, you can sweep a metal object over a motionless search coil.
THIS METAL DETECTOR HAS TWO TYPES OF OPERATING MODES:
1. ALL METAL DETECTION
All metals will be detected.
2. DISCRIMINATE, NOTCH, and AUTO NOTCH modes
In any of these three detect
Résumé du contenu de la page N° 2
INTRODUCTION Your Pioneer 202 is an advanced technology metal detector, designed for a variety of applications including coinshooting, relic hunting, and general purpose detecting. Before using your Pioneer 202, it is important to read these instructions. This manual's description of detection concepts and types of metals is Pioneer 202 FEATURES necessary to avoid frustration if you are new to the hobby of metal Touchpad Extended detecting. Controls Armrest Terminology Discriminate S-Rod Elimin
Résumé du contenu de la page N° 3
TABLE OF CONTENTS ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 S-Rod Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Mounting the Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 INSTALLING BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 DEMONSTRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 BASIC OPERATION . . . . . . . .
Résumé du contenu de la page N° 4
EASY ASSEMBLY Assembling your Pioneer 202 Metal Knurled Bolt Detector is easy and requires no tools. Knob Just follow these steps: 1 Using the supplied bolt and knurled l knob, attach the search coil to the lower stem. 2 If your model is equipped with a 3- l piece stem, open the plastic locking nut on the upper tube by rotating it counterclockwise. Then slide the Search Coil middle tube into the upper tube, inserting the silver button into the locating hole which is 1/2” behind the plastic lock
Résumé du contenu de la page N° 5
BATTERIES IMPORTANT: Always use ALKALINE batteries for optimal performance. Always remove the batteries for prolonged storage. CHECK THE BATTERIES if your detector exhibits any of the following symptoms: l 1 The unit does not turn on. l 2 Low speaker volume. l 3 Unable to tune detector with the discriminate knob. The Low Battery indicator light will come on and stay on whenever the batteries need replacing. It should flash momentarily when the Power Switch is turned off. The flashing indicator
Résumé du contenu de la page N° 6
PIONEER 202 DEMONSTRATION Here is a quick way to demonstrate the basic features of your PIONEER 202. I. Supplies Needed • A quarter (25¢) • A penny (1¢) • A dime (10¢) • A nickel (5¢) • Small piece of aluminum foil • A nail II. Position your Pioneer 202 • Place the detector on a table, with the search coil hanging over the edge. • Be sure that the search coil is far away from walls or metal objects. Keep the search coil away from any metal in the table. • Turn off appliances or lights wh
Résumé du contenu de la page N° 7
BASIC OPERATION TURNING ON YOUR DETECTOR Turn the left knob (SENSITIVITY) to the right. As the knob clicks to the "On" position, the detector sounds three beeps, the LCD arrows appear momentarily, and the unit pre-sets to the DISC/ALL METAL mode of operation. SET THE MODE 1. ALL METAL A. Press the DISC/ALL METAL touchpad B. Turn the right knob (DISC/NOTCH) to the left. The unit will emit sound when passing over all types of metal objects. The ALL METAL mode offers the greatest depth detection ca
Résumé du contenu de la page N° 8
LCD TARGET DISPLAY IRON/FOIL: All sizes of iron and READING THE DISPLAY aluminum objects will register on the The Liquid Crystal Display (LCD) shows far-left side of the scale. This could the PROBABLE identification of the indicate a worthless item such as a nail, targeted metal, as well as the PROBABLE or a more valuable historic iron relic. depth of the target, in inches. PULL TAB: All older pull tabs from Pass the search coil repeatedly over a beverage cans will register here. Most target, an
Résumé du contenu de la page N° 9
BATTERY & DEPTH INDICATORS The LOW BATT indicator will flash as DEPTH INDICATOR: the unit is powered on. If the indicator The Depth Indicator is accurate for comes on and stays on, replace the coin-sized objects. It indicates the batteries. depth of the target, in inches. Large and irregularly-shaped objects will yield less reliable depth readings When passing over an object, the depth indicator will light up and stay illuminated until another object is scanned. Pass repeatedly over the suspecte
Résumé du contenu de la page N° 10
SENSITIVITY ADJUSTMENT The principle use for the SENSITIVITY dimmer switches, also turn these off; knob is to eliminate dimmer switches can produce lots of ELECTROMAGNETIC INTERFERENCE EMI. (EMI). EMI is both naturally-occurring If your detector chatters with the and man-made. Common sources of SENSITIVITY knob in the 100% EMI are power lines, both suspended clockwise position, reduce the and buried, and broadcasting sensitivity until the chatter stops antennas. Machinery, when in (usually to th
Résumé du contenu de la page N° 11
MODES OF OPERATION tones, depending on the type of metal detected. As you turn the Disc Knob clockwise, you will progressively “discriminate out,” or eliminate from detection, different types of metals. Refer to the illustration below as a ALL METAL TOUCHPAD reference for the levels required to discriminate out different objects. ALL METAL MODE: There are two ways to enter the ALL-METAL mode. 1) Turn the right knob (Disc/Notch) left to the furthest counterclockwise position. Then Press the Disc/
Résumé du contenu de la page N° 12
MODES OF OPERATION NOTCH then gives the user a variable customized hunt. rejection window. In this mode, you can eliminate items in the middle of the metallic spectrum, but still detect items to the left of the scale, as follows: SELECTIVELY “NOTCH OUT” THESE AUTO NOTCH TOUCHPAD AUTO NOTCH MODE To enter the AUTO NOTCH mode, press the Auto Notch touch pad. In AUTO NOTCH mode, iron, most pull NOTCH is most useful to “notch out” tabs, and screw caps are specific unwanted items. If you automatically
Résumé du contenu de la page N° 13
AUDIO TARGET ID Depending on the operating mode PULL TABS: and Disc/Notch control setting, the Pull tabs are the most bothersome Pioneer 202 emits three distinct tones trash items for detectorist. Most will which classify metal objects into induce a medium tone. Most will be categories. eliminated automatically in the AUTO NOTCH mode, or alternatively be manually “notched out” in NOTCH IRON & STEEL: mode with the Disc/Notch control. The In the DISCRIMINATION mode most older pull tabs (those not
Résumé du contenu de la page N° 14
IN THE FIELD TECHNIQUES PINPOINTING COIL MOVEMENT When swinging the coil, be Accurate pinpointing takes practice and is best accomplished by careful to keep it level with the “X-ing” the target area. ground about one inch from the surface. Never swing the coil like 1. Once a buried target is indicated a pendulum. by a good tone response, continue sweeping the coil over the target in a narrowing WRONG side-to-side pattern. 2. Take visual note of the place on the ground where the “beep” sounds. 3.
Résumé du contenu de la page N° 15
IN THE FIELD TECHNIQUES After selecting your operating mode, objects. These signals are easily swing the search coil gently side-to- recognized by their often broken or side, slightly overlapping each sweep non-repeatable nature. as you move forward. Make sure you The Pioneer 202 is a very sensitive keep your search coil approximately 1 and deep-seeking detector. It will inch above the ground as you search. respond loudly to many targets that Raising it in the sweep, or at the ends other detec
Résumé du contenu de la page N° 16
METAL DETECTING APPLICATIONS COINSHOOTING: The most popular metal detecting application. When coinshooting, you want to discriminate out pull tabs, screw caps, and iron objects. Beware that highly oxidized steel may also be detected. Control settings required. 1) Press DISC/ALL METAL touch pad. 2) Turn the Disc/Notch Knob to the 3:00 position. RELIC HUNTING: A relic is a historical object, sometimes of great value. Relics can be found in abandoned homes, plowed fields or even your own backyar
Résumé du contenu de la page N° 17
AccessoriesPAGE.QX 8/10/07 11:07 AM Page 1 ACCESSORIES MAXIMIZE YOUR METAL DETECTING EXPERIENCE WITH THESE OPTIMAL BOUNTY HUNTER ACCESSORIES 10 INCH COIL For maximum depth detection. 4 INCH COIL Great for searching in trashy areas with its smaller target area. Also perfect for gold prospecting and fitting into tight spaces. CARRY BAG Custom-sized to carry your Commando. HEADPHONES Increase battery life and find more deeply buried objects, evidenced by faint signals sometimes undetected with t
Résumé du contenu de la page N° 18
TROUBLESHOOTING TROUBLE SHOOTING GUIDE SYMPTOM CAUSE SOLUTION Detector chatters • Using detector • Use detector or beeps erratically indoors outdoors only • Using detector near • Move away power lines from power lines • Using 2 detectors in • Keep 2 detectors close proximity at least 20’ apart • Highly oxidized • Only dig up buried object repeatable signals • Environmental • Reduce sensitivity electromagnetic until erratic interference signals cease Constant low tone • Discharged batteries •
Résumé du contenu de la page N° 19
CARE AND MAINTENANCE Your Pioneer 202 Metal Detector is an example of superior design and craftsmanship. The following suggestions will help you care for your metal detector so you can enjoy it for years to come. Handle the metal detector carefully. Dropping it can damage circuit boards and cases. Use and store the metal detector in normal temperature environments. Temperature extremes can shorten the life of electronic devices and distort or melt plastic parts. Wipe the metal detector with a d
Résumé du contenu de la page N° 20
TREASURE HUNTER’S CODE OF ETHICS: • Always check Federal, State, County and local laws before searching. • Respect private property and do not enter private property without the owner’s permission. • Take care to refill all holes and try not to leave any damage. • Remove and dispose of any and all trash and litter found. • Appreciate and protect our inheritance of natural resources, wildlife and private property. • Act as an ambassador for the hobby, use thoughtfulness, consideration and courtes
