Résumé du contenu de la page N° 1
D7024 Fire Alarm Control/Communicator
Operation and Installation Guide Addendum
This addendum (P/N: 41740) is intended to replace pages 5, 10, 11, 12, 20, 22, 52, 66, and 78
through 81 of the D7024 Reference Guide (P/N: 31499). Use this addendum to wire the
special 220 VAC, 50 Hz transformer in the control panel. For all other accessories,
programming instructions and tables, refer to the D7024 Reference Guide (P/N: 31499).
© 2005 Bosch Security Systems
130 Perinton Parkway, Fairp
Résumé du contenu de la page N° 2
D7024 Operation and Installation Guide 41740F Page 2 © 2005 Bosch Security Systems
Résumé du contenu de la page N° 3
D7024 Contents 7.6.1.2 Format............................................................................................................................................................. 63 7.6.1.3 Account Numbers ........................................................................................................................................... 63 7.6.1.4 Tone.............................................................................................................................
Résumé du contenu de la page N° 4
D7024 Contents Figures Figure 1: D7024 Control Board.............................................................................................................................................10 Figure 2: Supplemental Reporting........................................................................................................................................14 Figure 3: Enclosure Installation .............................................................................................
Résumé du contenu de la page N° 5
D7024 Notices 1.3 Industry Canada Notice The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. Industry Canada does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment m
Résumé du contenu de la page N° 6
D7024 Overview 2.0 Overview 2.1 System Overview The D7024 Control/Communicator is a fully integrated hard-wire fire alarm system. It can support four input points (expandable to 255 using D7039 Multiplex Expansion Module and the D7034 Four-Point Expander) and 16 individual users (expandable to 100 with the D7039). The control panel has a built-in LCD keypad, and up to four additional keypads may be used to provide user interface with the system and programming access for the installer.
Résumé du contenu de la page N° 7
D7024 Overview 2.2 Specifications Temperature Storage and Operating Temperature: +32° to +120°F (0° to +49°C) Power Input Power: 120 V, 60 Hz, 1.5 A (max. 2 0 A fused supply circuit) Notification Appliance Circuit (NAC) Power: Each NAC has 24 VDC nominal, unfiltered (special application) power with up to 2.5 A capacity (but limited by overall 4.0 A capacity). Refer to Technogram P/N: 34950 for compatible NAC devices. Auxiliary Power: 24 VDC nominal, unfiltered, 1.0 A (special applica
Résumé du contenu de la page N° 8
D7024 Overview 2.2.1 On-board Conventional Points All on-board points, and points implemented with the D7034 work with two- or four-wire detectors. The system has an optional alarm verification feature. Number of 2-wire Circuits 4 circuits, expandable to 8 using a D7034 Expander Type of Circuit Class B, Style B (use a D7014 Class A Zone Converter to convert to Class A, Style D as needed) EOL Resistor 2.21k ohms (P/N: 25899, UL listed) Supervisory Current 8 to 20 mA Required Current f
Résumé du contenu de la page N° 9
D7024 Overview Notes: D7024 Operation and Installation Guide © 2005 Bosch Security Systems Page 19 41740F
Résumé du contenu de la page N° 10
D7024 Installation and Setup 3.0 Installation and Setup Mounting Holes In the shipping box, you should find: • One D7024 Control/Communicator in static- control panel location resistant bag • One Enclosure with transformer ground retainer holes wire for standoffs • One hardware pack • One enclosure lock, washer, and keys • Six End-of-Line (EOL) resistors retainer holes for support posts The hardware necessary for installing the control panel in the enclosure is located in the hardware
Résumé du contenu de la page N° 11
D7024 Installation and Setup 3.3 Installing Optional Equipment There are two expansion options that connect directly to the panel, and are automatically detected and supervised when the panel is re-powered: • D7034 Four Point Expander • D7039 Multiplex Expansion Module When the panel is first re-powered after installing one of these options, the panel will display one of the following windows: 4Z EXP DETECTED PRESS CLEAR KEY NAC EXP DETECTED PRESS CLEAR KEY MUX DETECTED PRES
Résumé du contenu de la page N° 12
D7024 Control Terminal Connections 4.0 Control Terminal Connections Incorrect connections may result in damage R2 to the unit and personal injury. HR2 Phone Line 2 CAUTION (Supervised) HT2 Before servicing this equipment, remove all power including the transformer, battery and phone lines. T2 WARNING R1 Shared cable is not recommended for option bus, Phone Line 1 RH1 (Supervised) telephone or NAC wiring. IMPORTANT TH1 T1 Typical Fire Wiring Loop Power Loop Smoke Smoke Input + Input Power
Résumé du contenu de la page N° 13
D7024 Panel Programming These menu items are only allowed at the local keypad. The following window will appear: OPTION BUS (M/M) 1- UPDATE BUS 2- SETUP KEYPDS Press [1] to program system to update bus. After you have programmed Update Bus, the following window will appear: UPDATE COMPLETE TOT BUS DEVS: X Then the previous window will appear. 7.3.3.2 Setup Keypad Shortcut: 0-PROG, 3-PROG SYSTEM, 4-OPTION BUS This feature tells the system how many keypads should be supervi
Résumé du contenu de la page N° 14
D7024 Panel Programming Press [2] to select remote PIN. The following window will appear: REMOTE KYPD PIN? ____: YES (1) NO (2) Press the number key that corresponds to your selection and press [#]. The current setting is displayed in front of the colon on the second line. After you select the PIN requirement, the previous window will display. A PIN can be required before operations can be performed using the remote keypads on the option bus. If the remote keypads are not otherwise sec
Résumé du contenu de la page N° 15
D7024 Panel Programming 7.6.2.2 Dialing Type Shortcut: 0-PROG, 6-PROG ACC’NTS, 2-PHONE CONTROL This feature determines what format the panel will use for dialing on each phone line. The tone/pulse setting will first try tone dialing, and if that fails, will switch to pulse dialing. Choose Line 1 or Line 2. The display will scroll through the Phone Control options. Press [2] for DIALING TYPE. The following window will display: PHONE CONTRO (__) 1- PULSE ONLY 2- TONE/PULSE 3- T
Résumé du contenu de la page N° 16
D7024 Panel Programming 7.6.4 Ring Count Shortcut: 0-PROG, 6-PROG ACC’NTS, 4-RING COUNT It is recommended that the number of phone rings before the panel will seize the line to attempt remote programming be left set to “0”. The following window will display: RING COUNT (01-15, 00=DIS) ___ Enter the information and press [#/Cmnd]. The previous window will be displayed. An entry of [0] + [0] will disable ring detection. 7.6.5 Communication Tries Shortcut: 0-PROG, 6-PROG ACC’NT
Résumé du contenu de la page N° 17
D7024 Panel Programming Notes: D7024 Operation and Installation Guide © 2005 Bosch Security Systems Page 77 41740F
Résumé du contenu de la page N° 18
D7024 Installation Guide for System 8.0 Installation Guide for System 8.1 D7024-EXP The control panel should be installed in accordance with Local Code for Commercial Fire installations. 8.2 Installation Considerations Failure to install and program the control in accordance with the requirements in this section voids the listing mark of Underwriters Laboratories, Inc. The standby battery capacity is 40 Ah @ 24 VDC. The total nominal current must not exceed 1140 mA in standby nor 4 A wh
Résumé du contenu de la page N° 19
D7024 Installation Guide for System 8.3.1.6 Communications Programming (if Used for Central Station Service) A communication format compatible with the central station must be selected. Monitoring of both phone lines must be enabled. 8.3.2 Accessory Devices 8.3.2.1 D132B Multi-use Reversing Relay Module The D132B is a multi-purpose, fully configurable, smoke power-reversing module for activating detectors with local annunciation. The D132B will operate both two-wire and four-wire circu
Résumé du contenu de la page N° 20
D7024 Installation Guide for System 8.3.2.2 D184A Local Energy Kit The D184A is a UL Listed module that connects local energy signaling devices to the D7024 for auxiliary service operation. Refer to the D184A Installation Guide (P/N: 41175) for more information. 8.3.2.3 D185 Reverse Polarity Module The D185 Reverse Polarity Module is a UL Listed module that connects the control panel with either a single set or a pair of leased Telephone Company (Telco) lines in NFPA 72 remote station app
