Résumé du contenu de la page N° 1
Operation/Maintenance
Drying Tumblers
25 Pound Capacity
30 Pound Capacity
35 Pound Capacity
Stacked 30 Pound Capacity
Through Serial No. 0602004143
Refer to Page 5 for Model Numbers
NOTA: Para bajar una
copia de estas
instrucciones en
español, visite
www.comlaundry.com.
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 70269501R3
www.comlaundry.com August 2006
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Installation must conform with local codes or in the absence of local codes with: In the U.S.A., installation must conform to the latest edition of the American National Standard Z223.1/ NFPA 54 “National Fuel Gas Code” and Standard ANSI/NFPA 70 “National Electric Code.” In Canada, installation must comply with Standards CSA-B149.1 or Natural Gas and Propane Code CSA C22.1, latest edition, Canadian Electric Code, Part I. In Australia, installation must comply with the Australian Gas Association
Résumé du contenu de la page N° 4
Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70269501 2
Résumé du contenu de la page N° 5
Introduction......................................................................................... 5 Table of Model Identification ............................................................................. 5 Customer Service.................................................................................. 6 Contents Wiring Diagram.................................................................................... 6 Serial Plate Location.....................................................
Résumé du contenu de la page N° 6
Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70269501 4
Résumé du contenu de la page N° 7
Introduction Model Identification Information in this manual is applicable to these models. Gas Steam Electric HA025L SA025N UT025L HT025S UT025S HT025E UT025E HA025N ST025L UT025N HU025S UU025S HU025E UU025E HT025L ST025N UU025L ST025S YT025S ST025E YT025E 25 Pound HT025N SU025L UU025N SU025S SU025E HU025L SU025N YT025L HU025N UA025L YT025N SA025L UA025N HA030L SA030L UA030N HT030S UT030S HT030E UT030E HA030N SA030N UT030L HU030S UU030S HU030E UU030E HT030D ST030L UT030N ST030S YT030S ST030E YT
Résumé du contenu de la page N° 8
Introduction Customer Service Serial Plate Location When calling or writing for information about your If literature or replacement parts are required, contact product, be sure to mention model and serial numbers. the source from which the machine was purchased or Model and serial numbers are found on serial plate on contact Alliance Laundry Systems at (920) 748-3950 rear of machine, and inside door hinge. Refer to for the name and address of the nearest authorized Figure 1. parts distri
Résumé du contenu de la page N° 9
Safety Information IMPORTANT: Warranty is void unless tumbler Explanation of Safety Messages is installed according to instructions in the Precautionary statements (“DANGER,” “WARNING,” Installation Manual. Compliance with minimum and “CAUTION”), followed by specific instructions, specifications and requirements detailed herein, are found in this manual and on machine decals. These and with applicable local gas fitting regulations, precautions are intended for the personal safety of the
Résumé du contenu de la page N° 10
Safety Information 14. The interior of the tumbler and the exhaust duct Important Safety Instructions should be cleaned periodically by qualified Save These Instructions service personnel. 15. If not installed, operated and maintained in WARNING accordance with the manufacturer’s instructions or if there is damage to or mishandling of this product’s components, use of this product could Hazardous Voltage. Can cause shock, burn expose you to substances in the fuel or from fuel or cause de
Résumé du contenu de la page N° 11
Safety Information 23. Remove laundry immediately after tumbler 29. DO NOT bypass any safety devices. stops. 30. Solvent vapors from dry-cleaning machines 24. Always read and follow manufacturer’s create acids when drawn through the heater of the instructions on packages of laundry and cleaning drying unit. These acids are corrosive to the aids. Heed all warnings or precautions. To reduce tumbler as well as to the laundry load being the risk of poisoning or chemical burns, keep dried. Be sur
Résumé du contenu de la page N° 12
Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70269501 10
Résumé du contenu de la page N° 13
Operating Instructions WARNING To reduce the risk of fire: � DO NOT DRY articles containing foam rubber or similarly textured rubberlike materials. � DO NOT DRY plastics, anything containing wax or chemicals such as mops and cleaning cloths, or anything dry-cleaned at home with a dry-cleaning solvent. � DO NOT TUMBLE fiberglass curtains and draperies unless the label says it can be done. If they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass. W076 To redu
Résumé du contenu de la page N° 14
Q U A R T E R Operating Instructions 1 2 3 SELECT INSERT PUSH TEMP COIN START TEMPERATURE HIGH LOW INSERT QUARTER TURN KNOB 25 PUSH TO START TMB807N Figure 3 NOTE: Additional drying time may be purchased Electromechanical Coin Control at cycle start, or while tumbler is running, by CD, CX and CY Control Suffixes adding additional coin(s). 1. Set the TEMPERATURE selector at HIGH or IMPORTANT: If the loading door or lint panel LOW, or anywhere between these settings. door is opened during th
Résumé du contenu de la page N° 15
Operating Instructions 1 2 3 SELECT INSERT PUSH TEMP COIN START C 25 HIGH LOW TEMP TEMP START MED NO TEMP HEAT T361I T361I Figure 4 NOTE: Additional drying time may be purchased Electronic Coin Control at cycle start, or while tumbler is running, by EC, EX and EY Control Suffixes adding additional coin(s). 1. Select HIGH TEMP, MED TEMP, LOW TEMP IMPORTANT: To stop the tumbler at any time or NO HEAT by pressing the appropriate during the cycle, OPEN DOOR. To restart the temperature pad. t
Résumé du contenu de la page N° 16
Operating Instructions 1 2 0 0 60 10 15 50 5 20 COOL HEAT DOWN 40 10 30 HIGH LOW PUSH TO START 4 3 TMB47N Figure 5 Manual Timer IMPORTANT: If the door is opened during the cycle, the heating system will shut off and the MT Control Suffix motor will stop. To restart the cycle, door must be closed and the PUSH TO START button must be 1. Set the HEAT (Drying) timer for the number of pressed in. minutes (from 0-60) desired. 2. Set the COOL DOWN (Cooling) timer for the 5. When the cycle is co
Résumé du contenu de la page N° 17
Operating Instructions PROGRAM ON / SELECT STATUS HIGH AUTO TIME DRYING START AUTO SPECIAL SPECIAL MEDIUM COOL DOWN STOP/RESET CYCLE TIME AUTO * TEMP * COOL MED LOW TEMP DOOR OPEN DOWN DISPLAY F/ C LOW SIGNAL CUSTOM MORE LESS +- - CONDITION SAVE NO HEAT CUSTOM PROG TMB1789N TMB1789N Figure 6 2. Press START pad to start tumbler. Electronic OPL Control OM Control Suffix NOTE: All pads can be pressed in any sequence without damaging control or tumbler. To stop the 1. To use an Automatic Cycle,
Résumé du contenu de la page N° 18
Operating Instructions or SELECT INSERT INSERT PUSH TEMP COINS CARD START C 25 COOL DRYING DOWN START DELICATES TMB1964N Figure 8 IMPORTANT: To stop the tumbler at any time MDC Coin Control during the cycle, OPEN DOOR. To restart the BC and BX Control Suffixes tumbler, CLOSE door and press START pad. 1. Select HIGH TEMP, MED TEMP, LOW TEMP 4. When the cycle is complete, open door and or DELICATES by pressing the appropriate remove the laundry. temperature pad. 2. Insert the coin(s) in the
Résumé du contenu de la page N° 19
Operating Instructions SELECT PUSH TEMP START DRYING COOL DOWN INSERT CARD HERE START DELICATES TMB1965N Figure 9 MDC Card Control IMPORTANT: To stop the tumbler at any time during the cycle, OPEN DOOR. To restart the BL and BY Control Suffixes tumbler, CLOSE door and press START pad. 1. Select HIGH TEMP, MED TEMP, LOW TEMP 4. When the cycle is complete, open door and or DELICATES by pressing the appropriate remove the laundry. temperature pad. 2. Insert card into opening. 3. Press START
Résumé du contenu de la page N° 20
Operating Instructions C851I Figure 10 IMPORTANT: To stop the tumbler at any time NetMaster Coin Control during the cycle, OPEN DOOR. To restart the NC, NX, ZC and ZX Control Suffixes tumbler, CLOSE door and press START pad. 1. Select HIGH TEMP, MED TEMP, LOW TEMP 4. When the cycle is complete, open door and or NO HEAT by pressing the appropriate remove the laundry. temperature pad. 2. Insert the coin(s) in the coin slot. 3. Press START pad to start tumbler. © Copyright, Alliance La
