Résumé du contenu de la page N° 1
Introduction
Thank you for selecting the Honeywell Wireless Indoor/
Outdoor Thermometer with US Atomic Clock.
This device includes precise time keeping, alarms and
indoor/outdoor temperature monitoring features that you
can enjoy from the comfort of your home.
In this package you will find:
• Main unit (receiver)
• Remote sensor (transmitter) TS13
Wireless Indoor/Outdoor
Please keep this manual handy as you use your new
item. It contains practical step-by-step instructions, as
Thermometer
Résumé du contenu de la page N° 2
A FOUR-LINE DISPLAY FEATURES Allows easy reading of the indoor or outdoor MAIN UNIT temperature and calendar clock * Precise Atomic time keeping with daily clock updates * Time display with hours, minutes and seconds B CHANNEL SELECTOR * Calendar display with month and date Selects different remote sensor readings * US time zone settings (Pacific, Mountain, Central & Eastern) C MEMORY [MEM] BUTTON * Radio- controlled signal reception indicator Recalls maximum or minimum temperatur
Résumé du contenu de la page N° 3
REMOTE TEMPERATURE SENSOR BEFORE YOU BEGIN * Remote temperature transmission to the main unit 1. We recommend using alkaline batteries for main unit and via 433MHz signal. remote sensor. * Case can be wall mounted using built-in hanger 2. Avoid using rechargeable batteries . * 100 feet transmission range without interference 3. Insert batteries before first use, matching the polarity as * LCD display of measured temperature shown in the battery compartment. 4. Always insert batteries
Résumé du contenu de la page N° 4
Always place main unit by the window for better reception. BATTERY INSTALLATION If in 8 minutes the WWVB time signal has not been MAIN UNIT received, use the MODE button to set the time manually The Wireless Indoor/Outdoor Thermometer main unit (see "setting the time and date manually" section.) uses 2 “AA” batteries (not included). When the LCD The clock will continue to search for the WWVB time becomes dim or the respective low battery indicator signal daily from 1:00am to 4:3
Résumé du contenu de la page N° 5
LANGUAGE SETTING Use the ALARM ON/OFF button: * To view the weekday alarm, single alarm or the pre-alarm. The weekday may be displayed in one of five languages: * To set the alarm times. English, Spanish, French, German, or Italian 1. After the minute is set, press MODE, and the weekday * To turn off any alarm. display will indicate the current preset language, “EN” CALENDAR CLOCK DISPLAY MODES for English. Both an alarm time and the calendar share the same 2. Press or to se
Résumé du contenu de la page N° 6
* Pre-Alarm 1. Press to view the previous single alarm time and arm If the remote temperature (channel 1) is 32˚F or below, the alarm. the pre-alarm feature will be activated. The pre-alarm 2. Press to disarm the single alarm and “OFF” will be time interval can be set for 15, 30, 45, 60, 75 or 90 displayed. minutes before the weekday or single alarm time. 3. When the single alarm time is displayed, press and hold This alarm will only sound if either the weekday or single ALA
Résumé du contenu de la page N° 7
5. On the main unit select the same channel number that DISABLING ATOMIC TIME set on the remote sensor. Outdoor temperature on the SIGNAL RECEPTION display will show that transmission is being received The main unit can be set manually to disable the daily successfully. reception of the WWVB time signal. Press and hold the and buttons at the same time for Note: When the temperature falls below the freezing point 3 seconds and the radio reception icon will disappear. the batt
Résumé du contenu de la page N° 8
TEMPERATURE TREND WWVB RADIO CONTROLLED TIME The trend indicator shows the trend of temperatures collected The NIST (National Institute of Standards and Technology) at a particular remote sight. There are three trends will be radio station is located in Ft. Collins, Colorado. shown: Rising, Steady, and Falling. It transmits the exact time signal continuously throughout the continental United States at 60KHz. Wireless Indoor/ Outdoor Thermometer can receive this WWVB signal Arrow through its
Résumé du contenu de la page N° 9
CARE OF YOUR WIRELESS INDOOR/OUTDOOR SPECIFICATIONS THERMOMETER WITH US ATOMIC CLOCK Temperature Measurement This product is engineered to give you years of satisfactory Main unit service if you handle it carefully. Here are a few precautions: Indoor Temperature 1. Do not immerse the units in water. Proposed operating range : -5°C to +50°C / 2. Do not use any corrosive cleanser or chemical solution 23°F to 122°F on the units. They may scratch the plastic parts and corrode Temperatu
Résumé du contenu de la page N° 10
FCC STATEMENT DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation We is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept Name: Hideki Electronics, Inc. any interference received, including interference that may cause Address: 7865 SW Mohawk, Tualatin, OR 97062 undesired operation. Telephone No.: 1-503-612-8395 Warning: Changes or modifications to this unit not expressly declare t
Résumé du contenu de la page N° 11
STANDARD WARRANTY INFORMATION This product is warranted from manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and repair. Note that online product registration is required to ensure valid warranty protection. To register your product, go to our Company website at: www.hidekielectronics.us. Click Online Product Registration under the Customer Service menu. Sh
