Instruction d'utilisation Vulcan-Hart 1ER85D

Instruction d'utilisation pour le dispositif Vulcan-Hart 1ER85D

Dispositif: Vulcan-Hart 1ER85D
Catégorie: Friteuse
Fabricant: Vulcan-Hart
Dimension: 0.39 MB
Date d'addition: 9/9/2013
Nombre des pages: 20
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif Vulcan-Hart 1ER85D. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec Vulcan-Hart 1ER85D.

Pour votre confort

Si regarder l'instruction Vulcan-Hart 1ER85D directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction Vulcan-Hart 1ER85D en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction Vulcan-Hart 1ER85D sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
Vulcan-Hart 1ER85D Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction Vulcan-Hart 1ER85D - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de Vulcan-Hart 1ER85D. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

INSTALLATION &
OPERATION MANUAL
1ERD/1ERC SERIES ELECTRIC FRYERS
1ER50D ML-136496
1ER85D ML-136497
1ER50C ML-136498
1ER85C ML-136499
For additional information on Vulcan-Hart or to locate an authorized parts
and service provider in your area, visit our website at www.vulcanhart.com
VULCAN-HART
3600 NORTH POINT BLVD.
DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC BALTIMORE, MD 21222
WWW.VULCANHART.COM
FORM 32903 (11-05)

Résumé du contenu de la page N° 2

Installation, Operation and Care of MODEL 1ER SERIES ELECTRIC FRYERS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan 1ER Series Electric Fryers are produced with quality workmanship and material. Proper installation, usage and maintenance of your fryer will result in many years of satisfactory performance. It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided. Vulcan 1ER Series Electric Fryers are available in various sizes, with

Résumé du contenu de la page N° 3

In addition, check for possible shipping damage. If the fryer is damaged, save the packaging material and contact the carrier within 15 days of delivery. Do not use the door or its handle to lift the fryer. LOCATION The equipment area must be kept free and clear of combustible substances. Minimum clearance from combustible construction is 6" (152 mm) from the sides and 6" (152 mm) from the back of the fryer. Minimum clearance from noncombustible construction is 0" from the sides and 0" from the

Résumé du contenu de la page N° 4

Casters (Accessory) If it is necessary to disconnect the restraint, unplug electrical supply before disconnection. Reconnect the restraint before plugging the electrical supply in and returning the fryer to its installation position. Instructions for installing casters to the fryer are included with the casters. LEVELING Place a carpenter's level on top of the fryer and level the fryer front-to-back and side-to-side by turning the adjustable legs or casters. Fig. 1 ELECTRICAL CONNECTIONS WARNIN

Résumé du contenu de la page N° 5

OPERATION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK. BEFORE FIRST USE • Clean the protective metal oils from all surface parts and the tank interior using a noncorrosive, grease-dissolving commercial cleaner. Follow the cleaner manufacturer's directions. • Rinse thoroughly and drain (open the front door

Résumé du contenu de la page N° 6

1ERD SERIES CONTROLS — Control Guide — Power switch; for turning the fryer on or off. (Power switch is located behind the door panel.) — For cleaning purposes when the fryer is filled with water. Temperature is maintained at approximately 192°F (89°C).** — For entering and exiting the program mode. For scrolling through program parameters. — Starts and stops the timer; Silences the alarm after the timer times out; For entering temperature and time values in the program mode. — Starts and stops

Résumé du contenu de la page N° 7

PROGRAMMING Temperature, time and other parameters must be set before operating. Once these parameters are set, the fryer can be operated at the touch of a button. Press to enter the program mode and scroll through the parameters. If the Parameter Lock feature is disabled, program mode is immediate. If the Parameter Lock feature is on, LoC is displayed in the window and program entry cannot be accessed. To access the program mode while LoC is on, press within 6 seconds of pressing .

Résumé du contenu de la page N° 8

Melt Options (1ERD Series) The controller has three options for bring shortening up to temperature: CY L (Liquid shortening) - For slowly bringing liquid shortening up to temperature. CY S (Solid shortening) - For slowly melting solid shortening. CY O (No melt) - For immediately bringing liquid shortening up to fry temperature. When using solid shortening in the fryer, the CY S (solid shortening) option must be used. Solid shortening must be gently warmed to a liquid state before heating to fry

Résumé du contenu de la page N° 9

1ERC SERIES CONTROLS — Control Guide — Power switch; for turning the fryer on or off. (Power switch is located behind the door panel.) — For setting fry temperature. For viewing shortening temperature and set temperature. — For entering and exiting the program mode. — For selecting program parameters. For setting timers 1 through 0. For entering Through temperature and time values. — For toggling through the selections under program parameters. — For setting time on timers 1 through 5 in the pro

Résumé du contenu de la page N° 10

PROGRAMMING Temperature, time and other parameters must be set before operating. Follow the Program Guide to configure the fryer to your particular operation. Programming Guide to enter into the program mode, then follow the steps under each parameter to enter the Press desired information. To exit the parameter and save changes, press . To exit the program completely, press again. PARAMETER STEPS LEFT DISPLAY RIGHT DISPLAY Press SELECT OPTIONS Press DEGREES F or C F or C Fahrenheit or C

Résumé du contenu de la page N° 11

Programming Guide (Cont.) PARAMETER STEPS LEFT DISPLAY RIGHT DISPLAY Press SELECT OPTIONS Press ENGLISH (Factory Default) LANGUAGE Language Press to select a language. ENGLISH/ESPANOL FRANCAIS/DEUTSCH HOLLAND Press when complete. PROGRAM Press SELECT OPTIONS Press NO MELT/LIQUID/SOLID Melt Options Press to select melt options. NO MELT/LIQUID/SOLID (See Melt Options) Press when complete. PROGRAM Press SELECT OPTIONS Press RECOVERY* Recovery Time Press

Résumé du contenu de la page N° 12

Melt Options (1ERC Series) The controller has three options for bring shortening up to temperature. Upon startup, the fryer will display the selected melt option in the window when heating: HEATING NO MELT - For immediately bringing shortening up to fry temperature. MELT L LIQUID - For slowly bringing liquid shortening up to temperature. MELT S SOLID - For slowly melting solid shortening. When using solid shortening in the fryer, the SOLID melt option must be used. Solid shortening must be ge

Résumé du contenu de la page N° 13

Dispose The controller can also be programmed to alert the operator to dispose of the shortening by counting the number of times the shortening is filtered. When the filter count is the same as the programmed filter count, DISPOSE is displayed in the window. • PROG 00 - Enter the number of filter counts you want the controller to count before giving a dispose alert. To disable the dispose reminder, enter 99. • ACT 00 - Leave at 00 unless editing. This is the number of times the shortening has be

Résumé du contenu de la page N° 14

4. Enter the desired time using keys through . The time is displayed in the window. After entering the time, press ; SELECT PRODUCT is displayed in the window and the LED's on timers through are lit. 5. Repeat steps 3 and 4 to program the remaining timers, or press to exit the program completely. Timers through : 1. Press and enter the program mode. PROGRAM is displayed in the window. 2. Press . The LED's on timers through are lit and SELECT PRODUCT is displayed in

Résumé du contenu de la page N° 15

3. Select a timer; the programmed time is displayed in the window. A. Duty Time : 1) Press either arrow on ; DT# 00:00 is displayed in the window. 2) Enter the desired time using keys through . The time is displayed in the window. 3) Continue to the next step or press to choose another timer. B. Hold Time: 1) Press either arrow on ; HD# 00:00 is displayed in the window. 2) Enter the desired time using keys through . 3) Continue to the next step or press to choose another timer.

Résumé du contenu de la page N° 16

Time Programming Quick Chart Press to enter the program mode Press for Press for timers to timers to Select a Timer Enter Time Exit Program Press to Using continue to Press Set DUTY Time Press Set HOLD Time Press Select COMP or STRAIGHT — 16 —

Résumé du contenu de la page N° 17

FRYING GUIDELINES (ALL MODELS) FRYING • Heat shortening to set temperature. • Pieces of product to be fried should be about the same size to ensure the same doneness. • Drain or wipe dry raw or wet foods to minimize splatter when lowering into the hot oil. • Do not overfill baskets. Recommended maximum capacities Lb / kg of Total Lb / kg Total Lb / kg Product of Product of Product Models (1 Basket) (2 Baskets) (3 Baskets) 1 1ER50D, 1ER50C 2 /2 / 1 5 / 2.3 N/A 1 1 1ER85D, 1ER85C 3 /2 / 1.6 7 /

Résumé du contenu de la page N° 18

DRAIN INTERLOCK Prevents the heating elements from operating when the drain valve is open. SHORTENING LIFE Shortening life may be extended by following these guidelines: • Do not salt foods over the fryer. • Use good quality shortening. • Filter shortening daily at a minimum. • Replace shortening if it becomes poorly flavored. • Keep equipment and surroundings clean. • Set thermostats correctly. • Remove excess moisture and particles from food products before placing in fryer. CLEANING WARNING:

Résumé du contenu de la page N° 19

6. Close the drain valve and refill the tank with water. Add 1 cup (0.2 L) of vinegar to neutralize alkaline left by the cleaner. Solution level must be between the MIN and MAX level on the fryer tank. Bring the solution to a simmer and allow it to stand for a few minutes. 7. Drain the tank and rinse thoroughly with clear, hot water. All traces of cleaner must be removed. Dry the tank thoroughly. 8. Close the drain valve and add shortening. Follow the FILLING FRY TANK WITH SHORTENING procedure i

Résumé du contenu de la page N° 20

MAINTENANCE WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK. SERVICE AND PARTS INFORMATION To obtain service and parts information concerning this fryer, contact the Vulcan-Hart Service Agency in your area (refer to our website, www.vulcanhart.com for a complete listing of Authorized Service and parts depots).


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 Vulcan-Hart 1GR45C ML-136414 Manuel d'utilisation Friteuse 3
2 Vulcan-Hart 1GR45CF ML-136791 Manuel d'utilisation Friteuse 1
3 Vulcan-Hart 1GR45M ML-136408 Manuel d'utilisation Friteuse 1
4 Vulcan-Hart 1GR65C ML-136415 Manuel d'utilisation Friteuse 2
5 Vulcan-Hart 1GR45MF ML-136785 Manuel d'utilisation Friteuse 0
6 Vulcan-Hart 1GR45D ML-136411 Manuel d'utilisation Friteuse 7
7 Vulcan-Hart 1GR45M Manuel d'utilisation Friteuse 2
8 Vulcan-Hart 1GR65CF ML-136792 Manuel d'utilisation Friteuse 0
9 Vulcan-Hart 1GR45DF ML-136778 Manuel d'utilisation Friteuse 0
10 Vulcan-Hart 1GR65M Manuel d'utilisation Friteuse 0
11 Vulcan-Hart 1GR65MF ML-136786 Manuel d'utilisation Friteuse 0
12 Vulcan-Hart 1GR65D ML-136412 Manuel d'utilisation Friteuse 9
13 Vulcan-Hart 1GR65DF ML-136789 Manuel d'utilisation Friteuse 1
14 Vulcan-Hart 1GR65M ML-136409 Manuel d'utilisation Friteuse 1
15 Vulcan-Hart 1GR85M ML-136410 Manuel d'utilisation Friteuse 0
16 Alto-Shaam Inc.ASF-75E Manuel d'utilisation Friteuse 1
17 Alto-Shaam FRY TECH ASF-75E Manuel d'utilisation Friteuse 1
18 Alto-Shaam Inc.Gas Manuel d'utilisation Friteuse 1
19 Alto-Shaam FRY TECH ASF-60E Manuel d'utilisation Friteuse 5
20 Alto-Shaam FRYTECH ASF-60G Manuel d'utilisation Friteuse 6