Résumé du contenu de la page N° 1
LBS126F
Washing Machine
Lavatrice
Résumé du contenu de la page N° 2
capacity . 1 Warnings • The supply and draining hoses must always General Safety be securely fastened and remain in an • Never place your machine on a carpet covered undamaged state. floor . Otherwise, lack of airflow from below of • Fit the draining hose to a washbasin or bathtub your machine may cause electrical parts to securely before starting up your machine. overheat. This may cause problems with your There may be a risk of being scalded due to washing machine. high washing te
Résumé du contenu de la page N° 3
machine to the hot water valve. 2 Installation • If you want to use both water inlets of the Removing packaging reinforcement product, you can connect the hot water hose T ilt the machine to remove the packaging after removing the stopper and gasket group reinforcement. Remove the packaging from the hot water valve. reinforcement by pulling the ribbon. * Applies for the products supplied with a blind stopper group. Opening the transportation locks • Models with a single water inlet shoul
Résumé du contenu de la page N° 4
– (I) for prewash A damaged power cable must be replaced by B – (II) for main wash a qualified electrician. - (III) siphon The appliance must not be operated unless it B is repaired! There is the risk of electric shock! – ( ) for softener 3 Initial preparations for washing Preparing clothes for washing Detergent, softener and other cleaning agents Laundr y items with metal attachments such as, Add detergent and softener before starting the bras, belt buckles and metal buttons will dama
Résumé du contenu de la page N° 5
4 Selecting a Program and Operating Your Machine Control panel 5 6 4 3 9 2 1 8 7 1 - Spin Speed Adjustment Button 7 - Child-proof Lock Indicator* 2 - T ime Delaying Button 8 - Program Follow-up Indicators 3 - Auxiliar y Function Keys 9 - On/Off Button 4 - Start/Pause/Cancel Button 5 - Program Selection Knob * According to your machine’ s model 6 - Display program. Y our laundr y will be washed with Turning the machine on vigorous washing movements during a longer Plug in y
Résumé du contenu de la page N° 6
model of your machine. If you only want to drain the water without spinning • Anti-Allergico 60 your laundr y , select “Spin and Pump” program, Increased hygiene is provided by a longer and then select no spin function with spin speed heating period and an additional rinse cycle. It is selection button. Press “Start/Pause/Cancel” recommended for baby clothes and clothes worn button. by allergic people. Y ou should use a lower spin speed for delicate A • Delicati 30 (Delicate) laundries
Résumé du contenu de la page N° 7
Program and consumption table EN 2 Programme Cotone 90 6 49 2.18 • • • • • • Cotone 60** 6 49 1.02 • • • • • • Cotone 40 6 49 0.66 • • • • • • Cotone 30 6 49 0.5 • • • • • • Eco 40 40 6 49 0.87 • Anti-Allergico 60 60 6 69 1.29 * • • • Intensivo 40 6 69 0.98 * • • • Sport 40 40 3 47 0.56 • • • • • • Sintetici 60 3 50 0.95 • • • • • • Sintetici 40 3 50 0.73 • • • • • • Sintetici 30 3 50 0.5 • • • • • • Camicie 40 40 3.5 48 0.34 • • • • • Delicati 30 30 2 63 0.28 • • • • Lana 40 1.5 56 0.27 • • • L
Résumé du contenu de la page N° 8
ambient temperature, type and amount of laundr y , Auxiliary functions auxiliar y functions selected, and changes in the Auxiliary Function Selection Buttons supply voltage. Select the required auxiliar y functions before starting the program. Some combinations cannot be selected Time delay C together . (Ex.: Pre-wash and Quick W ash. W ith the “T ime delay” function you can delay the W arning signal on the selected auxiliar y function program start up to 24 hours. T ime delay can be wil
Résumé du contenu de la page N° 9
Changing the selections after the 5 Maintenance and cleaning program has started Detergent Drawer T urning the program knob while the program is in a Remove any powder residue buildup in the drawer . normal flow will not change the program. T o do this; 1. Press the dotted point on the siphon in the Switching the machine to standby mode softener compartment and pull towards you Press “Start/Pause/Cancel” button momentarily until the compartment is removed from the to switch your machine
Résumé du contenu de la page N° 10
buttons, coins and fabric fibers from clogging the hose back into its place. pump propeller during discharge of the washing If your product is not supplied with an emergency water . drain hose, do the following as shown in the figure below: • If your machine fails to drain the water , the pump filter may be clogged. Y ou may have to clean it ever y 2 years or whenever it is plugged. W ater must be drained off to clean the pump filter . In addition, water may have to be drained off co
Résumé du contenu de la page N° 11
6 Solution suggestions for problems Cause Explanation / Suggestion Program cannot be started or selected. • Machine may have switched to self protection • Reset your machine by pressing “Start/Pause/ mode due to an infrastructure problem (such Cancel” button for 3 seconds. (see, Canceling a as line voltage, water pressure, etc.). Program) There is water coming from the bottom of the machine. • Be sure the seals of the water inlet hoses are securely fitted. • There might be problems w
Résumé du contenu de la page N° 12
7 Specifications Models LBS126F Maximum dr y laundr y capacity (kg) 6 Height (cm) 84 W idth (cm) 60 Depth (cm) 50 Net W eight (±4 kg) 64 Electricity (V/Hz.) 230 V / 50Hz T otal Current (A) 10 T otal Power (W) 2200 Spinning cycle (rpm max.) 1200 Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly . V alues stated on the machine labels or in the documentation accompanying it
