Résumé du contenu de la page N° 1
Use & Care Guide
Guide d’utilisation et d’entretien
FRONT-LOADING AUTOMATIC WASHER
LAVEUSE DE CHARGEMENT FRONTAL
Para obtener acceso al
Manual de uso y
cuidado en español, o para
obtener información adicional
acerca de su producto, visite:
www.whirlpool.com
If you have any problems or questions, visit us at www.whirlpool.com
Designed to use only HE
High Efficiency detergents.
Conçue pour l’utilisation
d’un détergent haute
efficacité seulement.
Certified to Sanitize and to Reduce
Résumé du contenu de la page N° 2
FRONT-LOADING LAVEUSE DE AUTOMATIC WASHER CHARGEMENT FRONTAL TABLE OF CONTENTS Table de Matières ACCESSOIRES ...................................................................................... 3 WASHER SAFETY ................................................................................. 2 SÉCURITÉ DE LA LAVEUSE ................................................................. 24 ACCESSORIES ...................................................................................... 3 TABL
Résumé du contenu de la page N° 3
ACCESSORIES ACCESSOIRES Personnalisez votre nouvelle laveuse et sécheuse grâce Customize your new washer and dryer with the following aux authentiques accessoires Whirlpool suivants. Pour genuine Whirlpool accessories. For more information on options plus d’informations sur les options et sur les possibilités and ordering, contact your dealer, or visit: www.whirlpool.com. de commande, contactez votre revendeur ou consultez : www.whirlpool.com. 15" Pedestal Color matched pedestals rais
Résumé du contenu de la page N° 4
CONTROL PANEL AND FEATURES Not all features and cycles are available on all models. Steam models 2 5 1 3 4 8 7 C 9 6 B D A HE detergent B Liquid fabric A softener C Chlorine bleach D Oxi Dispense Non-Steam models 2 5 1 3 4 8 9 C 6 B A HE detergent B Liquid fabric softener A C Chlorine bleach 1 POWER BUTTON 3 START/PAUSE BUTTON Press to turn the washer on and off. Press and hold to start a cycle, or press once while a cycle is Press to stop/cancel a cycle at any time. in process to pause
Résumé du contenu de la page N° 5
Deep Clean (on some models) 5 LED DISPLAY AND SETTINGS BUTTONS The Deep Clean option adds additional soak and wash time When you select a cycle, its default settings will light up and the to many cycles to help remove tough stains. An integrated Estimated Time Remaining will be displayed. Factors such as heater helps to maintain optimal wash temperatures. See the load size, wash temperature, and water pressure may affect the “Cycle Guide” for cycles that allow the Deep Clean option. time
Résumé du contenu de la page N° 6
CYCLE GUIDE — STANDARD CYCLES Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available on all models. For best performance, not all settings are available with each cycle, and some options cannot be used together. Items to wash Cycle: Wash Spin Soil Available Cycle Details: using default Temperature*: Speed: Level: Options: cycle settings: Normally soiled c
Résumé du contenu de la page N° 7
CYCLE GUIDE — SPECIAL-PURPOSE CYCLES Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available on all models. For best performance, not all settings are available with each cycle, and some options cannot be used together. Items to wash Cycle: Wash Spin Soil Cycle Details: Available using default Temperature*: Speed: Level: Options: cycle settings: Swimwear,
Résumé du contenu de la page N° 8
USING YOUR WASHER IMPORTANT: Choosing the Right Detergent n Empty pockets. Loose change, buttons, or any small object Use only High Efficiency detergents. The package will be can plug pumps and may require a service call. marked “HE” or “High Efficiency.” Low-water washing creates excessive sudsing with a regular non-HE detergent. Using regular n Close zippers, fasten hooks, tie strings and sashes, and detergent will likely result in longer cycle times and reduced remove non-washable trim
Résumé du contenu de la page N° 9
Using the Dispenser To use the Precision Dispense drawer: 1. Open the dispenser drawer. 2. Add laundry products as described in steps 3–6. 3. Slowly close the dispenser drawer. Make sure it is completely closed. NOTE: A small amount of water may remain in the dispensers from the previous wash cycle. This is normal. 3. Add HE detergent to dispenser Models with a 3-compartment dispenser Models with a 4-compartment dispenser HE detergent HE detergent compartment compartment Pour a measure
Résumé du contenu de la page N° 10
4. Add fabric so ftener to dispenser 6. Add Oxi or color safe bleach (if desired) (on some models) Oxi / color safe bleach compartment Liquid fabric softener compartment Four compartment dispenser shown Four compartment dispenser shown On models with a 4-compartment dispenser, Pour a measured amount of liquid fabric softener into liquid add Oxi booster or color safe bleach to the fabric softener compartment. Always follow manufacturer’s Oxi compartment. Be sure to select the dir
Résumé du contenu de la page N° 11
8. Select CYCLE 11. Setting a delayed start Door LockedSensing FanFresh G Estimated Time Remaining S W W Delay Set C Delay Start Steam model shown If you do not want to begin a cycle immediately, you may choose the DELAY START option. This will delay the start Turn cycle knob to select your wash cycle. See “Cycle Guide” of the wash cycle by up to 16 hours on models with Steam, for details on cycle features. Not all options and settings are and 12 hours on non-Steam models. available on a
Résumé du contenu de la page N° 12
Cycle Status Lights Steam model shown Soak The Cycle Status Lights show the progress of a cycle. At each stage of the process, you may notice sounds or pauses that are This portion of the cycle allows gentle tumbling for water and different from traditional washers. detergent to soak into the load for optimal cleaning. Door Locked Wash Door Locked will light to indicate that the door is locked and This is the main portion of the wash cycle. You will see the cannot be opened without f
Résumé du contenu de la page N° 13
WASHER MAINTENANCE 13. Remove garments promptly after cycle is finished CLEANING YOUR WASHER Keep your washer as clean and fresh as your clothes. To keep washer interior odor-free, follow this recommended cleaning procedure at least once a month: 1. Make sure laundry drum is empty. ® 2. Using recommended AFFRESH washer cleaner, add one tablet to washer basket OR If using liquid chlorine bleach, add 1 cup (250 mL) to liquid chlorine bleach dispenser. IMPORTANT: Do not add detergent to C
Résumé du contenu de la page N° 14
WASHER MAINTENANCE CLEANING THE DOOR SEAL CLEANING THE DISPENSER 1. Open the washer door and remove any clothing or items You may find laundry product residue leftover in your from the washer. dispenser compartments. To remove residue, follow this 2. Inspect the gray colored seal between the door opening recommended cleaning procedure: and the basket for stained areas. Pull back the seal to 1. Pull dispenser drawer out until it stops. inspect all areas under the seal and to check for forei
Résumé du contenu de la page N° 15
NON-USE AND VACATION CARE REINSTALLING/USING WASHER AGAIN To reinstall washer after non-use, vacation, winter storage, Operate your washer only when you are home. If moving, or moving: or not using your washer for a period of time, follow these steps: 1. Refer to Installation Instructions to locate, level, and connect washer. 1. Unplug or disconnect power to washer. 2. Before using again, run washer through the following 2. Turn off water supply to washer to avoid flooding due recomm
Résumé du contenu de la page N° 16
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Error Code Appears in Display Once any possible issues are corrected, press POWER once to clear the code. Reselect and restart the cycle. Sud (Excess suds) Excessive suds in washer. Washer is Allow the machine to continue. Use only HE detergent. appears in display running a suds reduction routi
Résumé du contenu de la page N° 17
First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Vibration or Off-Balance Front and rear feet must be in firm contact with floor, and washer Vibration, rocking, or Feet may not be in contact with the must be level to operate properly. Jam nuts must be tight “walking” floor and locked. against the bottom of the cabinet. Washer may not be level. Check floor
Résumé du contenu de la page N° 18
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. Solution If you experience Possible Causes Washer not performing as expected (cont.) Both hoses must be attached and have water flowing to Washer won’t run or fill, Check for proper water supply. inlet valve. washer stops working Both Hot and Cold water faucets must be turned on. Check that inlet valve screens have not become clogged. C
Résumé du contenu de la page N° 19
First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. Possible causes Solution If you experience Washer not performing as expected (cont.) Washer not draining/ Empty pockets and use garment bags Small items may have been caught in pump. spinning, loads are for small items. still wet Drain hose extends into standpipe Check drain hose for proper installation. Use drain hose form and securely attach to dra
Résumé du contenu de la page N° 20
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Washer not performing as expected (cont.) Load not rinsed Check for proper water supply. Make sure hot and cold inlet hoses are not reversed. Both hoses must be attached and have water flowing to the inlet valve. Both hot and cold water faucets must be on. Inlet valve screens on washer may be clo
