Résumé du contenu de la page N° 1
LAVEUSE HAUTE
TOP-LOADING
EFFICACITÉ À FAIBLE
HIGH EFFICIENCY
CONSOMMATION D’EAU
LOW-WATER WASHER
AVEC CHARGEMENT
USE AND CARE GUIDE
PAR LE DESSUS
GUIDE D’UTILISATION
ET D’ENTRETIEN
Table of Contents Table des Matières
WASHER SAFETY .........................................................2 SÉCURITÉ DE LA LAVEUSE ......................................19
WHAT’S NEW UNDER THE LID? .................................3 QUOI DE NEUF SOUS LE COUVERCLE? ................20
CONTROL PANEL AN
Résumé du contenu de la page N° 2
WASHER SAFETY 2
Résumé du contenu de la page N° 3
WHAT’S NEW UNDER THE LID? Cleaning with Less Water Automatic Load Size Sensing Once you start the cycle, the lid will lock, and the washer will begin the sensing process to determine the correct water level for the load. You will find a step-by-step description in the “Cycle Status Lights” section. You will hear the motor turn the basket in short pulses to Washplate Washplate thoroughly wet the load. This low-water wash method uses less water and energy compared to a traditional agitato
Résumé du contenu de la page N° 4
CONTROL PANEL AND FEATURES 3 4 5 6 2 1 8 7 9 Not all features and cycles are available on all models. 8 1 POWER BUTTON FABRIC SOFTENER DISPENSER SELECTOR Press to turn the washer ON. Pressing once while the Press this button to set the Fabric Softener dispenser to washer is on will cancel the current cycle, pressing twice automatically add liquid fabric softener to the load at the will turn the washer OFF. correct time. 9 2 WASH CYCLE KNOB CYCLE OPTIONS Turn the Wash Cycle knob to select a cy
Résumé du contenu de la page N° 5
You may also add or remove options for each cycle. Note that not all options can be used with all cycles, and some are preset to work with certain cycles. DEEP CLEAN This option provides enhanced cleaning action for tough stains. It will add additional time to the cycle. Deep Clean should be started on a dry load only and must be selected before the washer has started to fill. EXTRA RINSE This option can be used to automatically add a second rinse to most cycles. ECOBOOST The EcoBoos
Résumé du contenu de la page N° 6
CYCLE GUIDE Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load being washed. If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage. Not all cycles and options are available on all models. Spin Wash/Rinse Soil Available Cycle: Items to wash: Speed: Cycle Details: Temperature: Level: Options: Lightly soiled Quick Hot/Cold Heavy Deep Clean Use this cycle t
Résumé du contenu de la page N° 7
CYCLE GUIDE Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load being washed. If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage. Not all cycles and options are available on all models. Wash/Rinse Spin Soil Available Items to wash: Cycle: Temperature: Speed: Level: Options: Cycle Details: Whites Hot/Cold High Heavy Deep Clean This cycle adds liquid chlorin
Résumé du contenu de la page N° 8
USING YOUR WASHER 2. Load laundry into washer 1. Sort and prepare your laundry • Empty pockets. Loose change, buttons, or any small object can pass under the washplate and become trapped, Load garments in loose heaps evenly causing unexpected sounds. around the washplate. Do not load • Sort items by recommended cycle, water temperature, garments directly over the center and colorfastness. of the washplate; when loaded, the center of the washplate should be • Separate heavily soil
Résumé du contenu de la page N° 9
Using Laundry Product Dispensers 3. Add HE detergent to dispenser 5. Add fabric softener to dispenser Fabric softener dispenser Detergent dispenser Pour a measured amount of liquid Add a measured amount of HE fabric softener into dispenser; always detergent into detergent dispenser. follow manufacturer’s directions for correct amount of IMPORTANT: Use only High Efficiency detergents. The package fabric softener based on your load size. Then select will be marked “HE” or “High Efficien
Résumé du contenu de la page N° 10
7. Select cycle 8. Select cycle settings, if desired Once you select a cycle, the default settings for that cycle will Turn cycle knob to choose your wash be lit. Press the cycle settings buttons to change the Soil Level, cycle. Estimated Time Remaining Spin Speed, and Wash/Rinse Temperature, if desired. Not all will light up with a cycle time. You may settings are available with all cycles. notice time adjusting during the cycle. NOTE: Always read and follow fabric care labels instru
Résumé du contenu de la page N° 11
WASHER MAINTENANCE 9. Select cycle options WATER INLET HOSES Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found. When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker. CLEANING YOUR WASHER Keep your washer as clean and fresh as your clothes. Select any other cycle options you may wish to add, if not To keep washer interior odor
Résumé du contenu de la page N° 12
TRANSPORTING YOUR WASHER CLEANING YOUR DISPENSERS You may find laundry product residue leftover in your 1. Shut off both water faucets. Disconnect and drain water dispensers. To remove residue, wipe with a damp cloth inlet hoses. and towel dry. 2. If washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving. 3. Disconnect drain from drain system. 4. Unplug power cord. 5. Place inlet hoses inside washer basket. 6. Drape power cord and drain hose ove
Résumé du contenu de la page N° 13
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Vibration or Off-Balance Front and rear feet must be in firm contact with floor, and washer Vibration, rocking, or Feet may not be in contact with the must be level to operate properly. Jam nuts must be tight “walking” floor and locked. against the bottom of the cabinet. Washer may not be leve
Résumé du contenu de la page N° 14
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Solution Possible Causes Washer not performing as expected (cont.) Both hoses must be attached and have water flowing to Washer won’t run or fill, Check for proper water supply. inlet valve. washer stops working Both Hot and Cold water faucets must be turned on. Check that inlet valve screens have not become clogged. C
Résumé du contenu de la page N° 15
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. Possible causes Solution If you experience Washer not performing as expected (cont.) Washer not draining/ Cycles with lower spin speeds remove less water than cycles Using cycles with a lower spin speed. spinning, loads are with high spin speeds. Use the recommended cycle/speed spin still wet (cont.) for your garment. Washer may be tigh
Résumé du contenu de la page N° 16
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Washer not performing as expected (cont.) Load is tangling (cont.) Wash action and/or spin speed too Select a cycle with a slower wash action and slower spin speed. fast for load. Note that items will be wetter than when using a higher speed spin. Wash load not completely Not cleaning or Wa
Résumé du contenu de la page N° 17
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Washer not performing as expected (cont.) Fabric Damage (cont.) Liquid chlorine bleach may have been Do not pour liquid chlorine bleach directly onto load. Wipe up added incorrectly. bleach spills. Undiluted bleach will damage fabrics. Do not use more than recommended by manufacturer. Do not pl
Résumé du contenu de la page N° 18
WHIRLPOOL CORPORATION LAUNDRY WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Speci ed Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Whirlpool designated servi
Résumé du contenu de la page N° 19
SÉCURITÉ DE LA LAVEUSE 19
Résumé du contenu de la page N° 20
QUOI DE NEUF SOUS LE COUVERCLE? Laver avec moins d’eau Détection automatique de taille de charge Une fois que l’on démarre le programme, le couvercle se verrouille et la laveuse entame un processus de détection pour déterminer le niveau d’eau approprié à la charge. Cela peut prendre plusieurs minutes avant que l’eau ne soit ajoutée. Voir la description pas-à-pas dans la section “Témoins lumineux Impulseur Washplate de programme”. Vous entendrez le moteur faire tourner le panier par
