Instruction d'utilisation Haier XPM20-A

Résumé du contenu de la page N° 1

Mini Washing Machine
User's manual
This manual is for
XPM20-A
Please read this manual
carefully before using.
Retain it for future reference.

Résumé du contenu de la page N° 2

Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Select the wash time Finish washing Disposal after washing Trouble-shooting Packing list *Specification

Résumé du contenu de la page N° 3

Names of the parts Timer knob Control panel Water inlet Filter cap Lint filter(Installed by user) Panel support Top lid Pulsator Cabinet Drain hose Base frame Fixing leg (four pieces) Meaning and description of the symbols Contents marked with that symbol are related to the safety of the product and the personal Warning sign safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal

Résumé du contenu de la page N° 4

Safety precautions ×¢ÒâÊÂÏî When the machine is normally Please insert the power cord into using, please put the power plug special receptacle with rated vol- at the location easily to be insert- tage. Be sure to use single-phase ed and extracted by hand. Be sure three pins receptacle. The earthing to pull the plug off when there's terminal of the receptacle must be power failure, or the machine is earthed reliably. If possible, please being moved, cleaned or when it adopt electric leak

Résumé du contenu de la page N° 5

Safety precautions ×¢ÒâÊÂÏî Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Keep the machine away from direct Handicapped

Résumé du contenu de la page N° 6

Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose When washing, the drain hose must be hung up, if you want to drain, please refer to the below mention. The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than 10cm , or the drainage will <10cm not be smooth enough

Résumé du contenu de la page N° 7

Adjust the installation position The largest permitted slope of the bearing surface of the washing machine is 2 . Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods: Hang a becket with weight to confirm if the washing machine is horizontal. Install the water inlet hose ; Select the water level Insert the water inlet hose into the water water inlet hose inlet jointer on the control panel. (To dismantle the water inlet hose,

Résumé du contenu de la page N° 8

Preparation before washing Ï´Ç°×¼±¸ Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Hang the drain hose up. Pay attention to followings before washing the laundries Check if The quantity of When the pulsator Clear the Tie the long the laundries the laundries is running , the pocket

Résumé du contenu de la page N° 9

The musts in washing The capacity of washing of the machine refers to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in reasonable amount of laundries and the laundries can be turned round in washing for one time washing. Usage of the det

Résumé du contenu de la page N° 10

Finish washing The pulsator stops rotating. Put down the drain hose to discharge the water. Disposal after washing After using, please clean the lint and foreign materials of the lint filter and lint frame in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint

Résumé du contenu de la page N° 11

Trouble-shooting The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. Phenomena How to check The washing machine Is there power failure? does not act Is the power plug inserted tightly? There's abnormal sound Is the machine slanting? inside the machine. Is there metal item inside the tub? Is the drain hose put down? Is the drain hose frozen? The drainage does not work. Is the front end of the drain hose blocked? 9

Résumé du contenu de la page N° 12

Packing list Quantity Name One piece User's manual One piece Water inlet hose One piece Lint filter One set Mini washing machine Specification Water level/Water quantity (about) 1/7L 2/12L 3/18L Injection pressure(MPa) 0.02 0.2 10