Résumé du contenu de la page N° 1
Twin-tub Washing Machine
User's manual
This manual is for
XPB70-111S
XPB70-112S
Special number:0030806263
Please read this manual
carefully before using.
Retain it for future reference.
Résumé du contenu de la page N° 2
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting *Answers to question Packing list *Specification 17
Résumé du contenu de la page N° 3
Names of the parts Buzzer Water-filling entrance Outer cover of the spin tub Water inlet selector handle Inner cover of the spin tub Wash selector Spin timer Wash timer Spin tub frame Control panel Spin tub Overflow filter Quick water-filling entrance Cabinet Drain hose hook Water level adjusting lever Power cord Lint filter(Installed by user) Pulsator Wash tub Drain hose Wash tub cover Base frame Note Different machine,the form of cortrol panel is different. Meaning and
Résumé du contenu de la page N° 4
Safety precautions Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage.Be sure to use single-phase at the location easily to be insert- three pins receptacle.The earthing ed and extracted by hand. Be sure terminal of the receptacle must be to pull the plug off when there's earthed reliably.If possible,please power failure, or the machine is adopt electric leakage protector. being moved, cleaned orwhen it i
Résumé du contenu de la page N° 5
Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Keep the machine away from direct Handicapped or chil
Résumé du contenu de la page N° 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package,please take out the lint filter from the document bag,install it to the overflow filter of the wash tub.See to the figure. Overflow filter Lint filter Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain
Résumé du contenu de la page N° 7
How to change the direction of the drain hoses Side sectional view Figure 1 indicates the ex factory installation Drain hose Fixing hook position of the drain hose. fixing hook installation hole Drain hose Pull outwards slightly Take off Extend the drain hose from the side of spin tub. the drain hose Drain hose Figure 1 Figure 2 fixing hook Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the
Résumé du contenu de la page N° 8
Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling entrance on the control panel, then push the Water inlet hose water-filling jointer into the entrance on the Water inlet jointer control panel. (To dismantle the water inlet pipe, just push the control handle as indicated in the Push figure and pull it out) Water inlet Control handle Select water level according to the Water level quantity of the laundries. indicator
Résumé du contenu de la page N° 9
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to followings before washing the laundries Check if
Résumé du contenu de la page N° 10
The musts in washing The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- able to put in reasonable amount of laundries and the laundries can be turned round in wash- ing for one
Résumé du contenu de la page N° 11
Washing sequence Water-filling selector handle Overfilling sign Wash timer Wash selector Spin timer Water-filling entrance (To set to below 2 minute, (Strong current, Buzzer (To set to below 1 minute, first set to 5 minute then standard current) first set to 2 minute then (The buzzer will ring when turn it back. it can increase turn it back. it can increase the washing finishes) the service life of the timer). the service life of the timer). OFF SILK OFF STRONG WOOL SILK
Résumé du contenu de la page N° 12
Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper Proper The laundries No gland are slanting (2) Close the inner and outer cover of the spin tub. Outer cover of The spin tub Inner cover of The spin tub (3) Spin for 1-2 minutes. 3.Run the foam-removing spinning. (1) Open the outer cover of the spin tub. (2) Set the water-fi
Résumé du contenu de la page N° 13
Rinsing Rinse with water-filling OVERFILL 1.Put the laundries into the wash tub. Select suitable current according to the laundries. If you find water flo- wing out here,please twist the water tap to 2.Adjust the water level limit the water filling. Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing. (Repeat the midway
Résumé du contenu de la page N° 14
Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. In spinning, it will pause the work if you op
Résumé du contenu de la page N° 15
Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See to Figure 1) Figure
Résumé du contenu de la page N° 16
Cleaning the overflow filter 2. Take off the corrugation pipe. Water level Dismantle the upper part of the adjusting lever corrugation pipe inside the overflow filter ( as indicated in Corrugation Figure 1). Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. Figure 1 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounting plate at Hook the bottom of the fi
Résumé du contenu de la page N° 17
Trouble-shooting Answer to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, please take them out immediately. 1.Dismantle As indicated in the figure, push the point marked Spin tub frame with " " to pull the spin tub frame to oblique upwards to dismantle it. 2.Install After install the back edge of the spin tub frame to proper position, push the four points marked with " " by force to reset it. Please check care
Résumé du contenu de la page N° 18
Trouble-shooting Answers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason Is there power failure? Is the power plug loose? T
Résumé du contenu de la page N° 19
Packing list Quantity Name One piece User's manual One piece Water inlet hose One piece Lint filter Water-filling jointer One piece One piece Gland One set Twin-tub washing machine Specification Maximum/55L Medium/46L Minimum/36L Water level/Water quantity (about) Injection pressure(MPa Rated washing / spinning capacity(kg) 7.0/5.0 (weight of standard dry cloth) 17
