Résumé du contenu de la page N° 1
LCL4 MULTI-LINE LASER
USER GUIDE
Résumé du contenu de la page N° 2
Page 2 CONTENTS Contents: 3. Warranty 4. Features 6. Laser Safety & Battery Placement 7. Operation 9. Using the Universal Mount 10. Applications 11. Laser Offsets 12. Calibration 14. Specifications 15. Care & Maintenance 16. Standard Accessories
Résumé du contenu de la page N° 3
Page 3 WARRANTY Statement of Limited Warranty: This laser is warranted to be free from defects in performance and workmanship for a period of twelve months from date of purchase. The warranty covers all cost of repair or replacement of parts. The seller is not responsible for the cost of transportation for returning the instrument for repair. Limits and Exclusions: The warranty will not apply to any damage resulting from negligence, accident damage, misuse, repair or storage, or in case of a
Résumé du contenu de la page N° 4
Page 4 FEATURES Low battery, Out of Level, External Power LED Working Mode LED Top View Pulse Mode LED Pulse Mode Button Horizontal, Vertical & Cross Line Select Button Plumb Up Beam Window Vertical Beam Window Horizontal Beam Window 1/4” Tripod Mount Plumb Down Beam Window Pendulum Lock & Control Switch Bottom View
Résumé du contenu de la page N° 5
Page 5 FEATURES Battery compartment External Power 4.5V DC Attachment Hole Magnetic Back Strap Raceway 1/4” Tripod Screw 5/8” Tripod Mount Universal Mount Square Attachment
Résumé du contenu de la page N° 6
Page 6 LASER SAFETY AVOID EXPOSURE: Laser radiation is emitted from this product. Use of controls, adjustments or procedures other than those specified herein may result in laser radiation exposure. Never stare directly at the beam or view directly with optical instruments. AVOID EXPOSURE This label is attached to the unit at the laser aperture. LASER LIGHT IS EMITTED FROM THIS APERTURE IMPORTANT: “DANGER” labels are attached to every LCL4. They are not to be removed or defaced. Do not dis
Résumé du contenu de la page N° 7
Page 7 OPERATION Pendulum Lock The LCL4 is a precision instrument and should be treated with care. When not in use, the pendulum should always be in the off position (figure1). Locking the pendulum allows the LCL4 to better withstand vibrations and shock incurred during transportation or Figure 1 if the unit is dropped. Locked Line Angle In the locked line angle position (Figure 2), the pendulum is locked and will not automatically level or plumb the lines. When in the locked line angl
Résumé du contenu de la page N° 8
Page 8 OPERATION Horizontal, Vertical, Plumb & Cross Line Options The LCL4 has three line options, accessible by using the line options button located on the top of the instrument. If the unit has been turned on, the plumb up and down beams will always be on. Use the line option button to cycle through the level (horizontal), plumb (vertical) or cross line modes, as shown below. Press 1x Default line Vertical & Plumb up and down line Horizontal & Plumb up and down line Press 2x Cross & Pl
Résumé du contenu de la page N° 9
Page 9 USING THE UNIVERSAL MOUNT The LCL4 comes with a multi-purpose universal mount that allows the unit to be attached to multiple surfaces including wood, metal, pipes, construction tripods, camera tripods and flat surfaces. 1/4” Tripod Mount Use the threaded hole, located on the bottom of the universal mount, to mount the universal mount and the attached LCL4 to a camera tripod. 5/8” Tripod Mount Use this threaded hole, located on the bottom of the universal mount, to mount the universa
Résumé du contenu de la page N° 10
Page 10 APPLICATIONS Cabinet installation Wall panelling and wallpapering Bathroom tiling Floor tiling Wall tiling Drilling & sawing alignment • Carpentry: Level and set cabinets and counter tops and Install trim • Stair Layout: Level and plumb decks, plumb framing and partition walls, plumb windows and door frames • Concrete: Set forms and footings • Electrical: Level electrical outlets, transfer lighting layout from floor to ceiling using plumb beam • Plumbing: Layout piping, sewe
Résumé du contenu de la page N° 11
Page 11 APPLICATIONS Hanging pictures Aligning shelves Hanging pendant lamps Window framing LASER OFFSETS Laser Offsets Use the laser offset information provided in the adjacent illustration to speed plumbing and levelling operations. 28mm 32mm
Résumé du contenu de la page N° 12
Page 12 CALIBRATION It is recommended that you check your LCL4 periodically to assure its accuracy. To check level: Choose two walls approximately 4 - 5 metres apart (figure 1). Turn on the LCL4 to the “auto level” setting. With the laser 15cm away from and facing Surface 1, carefully mark the center of the line where the lines cross. Label this mark “A1” (figure 1). Swivel the laser 180 degrees and mark the center of the line where the lines cross on Surface 2. Label this mark “B1” (figur
Résumé du contenu de la page N° 13
Page 13 CALIBRATION To check plumb: Surface 1 Surface 2 Choose a door jamb with a minimum of 2.5 metres clearance on each side of the door. A2 B2 Turn on the LCL4 to “auto level” setting. With your laser at point “A” (figure 3), x x make two marks on the floor. 15cm Make the first mark at 2.5 metres from 4-5m point “A” centred on the door header Figure 2 above. Mark this point “B”. Make a second mark 5 metres from point “A”. Make this point “C”. Without moving the laser, make a third mark
Résumé du contenu de la page N° 14
Page 14 SPECIFICATIONS Accuracy ± 3mm @ 10m Plumb beams: ± 1.5mm @ 5m Self-levelling Range ± 5° Operating Range 30m indoors Outdoor Mode - Up to 50m outdoors, working with laser detector Fan Angle 140° vertical and 130° horizontal Out-of-level Indication Blinking laser lines and audible alarm Unit Tripod Mount ¼” x 20 camera tripod Pendulum Lock/Off Protects pendulum during transportation and storage for added durability Unit Dimensions 110mm x 57mm x 97mm Unit Weight 470g Universal Mount
Résumé du contenu de la page N° 15
Page 15 CARE & MAINTENANCE This device is a product of precision design and manufacture and should be treated with care. The suggestions below will help the user fulfill any warranty obligations and also allow the user to enjoy this product for many years. When using the device: Keep it and all its parts and accessories out of small children’s reach. This laser is built to be operated under wet conditions (IEC 529;IP 54), however the unit should always be dried off before storage. Do not stor
Résumé du contenu de la page N° 16
Page 16 STANDARD ACCESSORIES • Laser (LCL4) • Universal mount • Square • Strap • User guide • 3 “AA” batteries • Pouch
Résumé du contenu de la page N° 17
519 Nurigong Street PO Box 366, Albury NSW 2640 Phone: (02) 6058 0300 Fax: (02) 6021 7403 E-mail: coopertoolsaus@coopertools.com Web Site: www.cooperhandtools.com.au Issue: 0708829A
