Résumé du contenu de la page N° 14
ssembly - OPTIONAL foot board EMBEDDED STAFF CONTROL A 4. Insert the Footboard Mounting Tubes into the Main Bed Frame Tubes so that Item # Qty Part # Description the holes match up as shown. Secure with two 5/16 x 1-1/2” Clevis Pins (#6) STAFF CONTr OL ASSEMBLy KIT (ZL788053) INCLu DES: and Hair Pin Clips (#7) (1 each per bed frame tube). 1 1 Z53650 Std. Oak Head- & Footboard (with cut out) 5. Unplug the Pendant cable from the Extension Cable that’s already attached 2 1 999-0775-901 Staff Con
Résumé du contenu de la page N° 15
WALLSAVERS, MATTRESS RETAINERS & EDEMA RATCHETS Basic American Medical products, a division of GF Health products, Inc. • Matrix II • r ev d Manual p12
Résumé du contenu de la page N° 16
(with optional trapeze positioning) ssembly - standard wallsaver A 1. The Matrix II 709 standard wireform wallsaver is easily attached to the head-end of caster carriage. Begin by positioning the wallsaver (#2) on the head end with the exposed ends (with flat insert tabs) facing the foot- end of the bed. 2. From the inside, locate the bottom last hole in the carriage bracket on both sides of the bed. Holding the wallsaver in a 45° position as shown, squeeze its sides inward toward ce
Résumé du contenu de la page N° 17
ssembly - standard corner mattress retainers A NOTE: The Mattress retainers are interchangeable for both the head and foot ends of the bed. The foot retainers come standard with your bed. Head retainers are optional and must be ordered separately. 1. Install the Mattress Retainers (#1) into the holes on the corners of the Head Deck or Foot Deck. a. Starting in a vertical position, place the ends into the holes as shown in Figure A so that the curved part of the retainer is facing outward. b.
Résumé du contenu de la page N° 18
PERATION OF OPTIONAL EDEMA FOOT RATCHET 999-0748-001 O The foot ratchet allows the attendant to manually adjust the foot position for the resident/patient. It offers five different positions for comfort versatility. It was designed to be easily adjusted by hand. Simply lift the foot end of the bed via the main frame and position the foot end in one of the five slots available for the preferred foot height. To release the ratchet so that it returns to the down position, lift the foot end to th
Résumé du contenu de la page N° 19
Accessory Assembly Basic American Medical products, a division of GF Health products, Inc. • Matrix II • r ev d Manual p16
Résumé du contenu de la page N° 20
ccessory Assembly - Head & Foot Half Rails A Head-End Half Rail KIT: ZA78400 (Includes part 999-0784-908G —Left s ide and part 999-0784-907G - r ight s ide, plus hardware bag) Item # Qty. Part # Description Head-End Half Rail: Left-Hand Side - 76” HeAd Head-End Half Rail: Left-Hand Side - 80” 1 1 999-0784-908G r ight Foot-End Half Rail: Right-Hand Side - 80” Only (Not shown) 1 1 999-0794-908G Foot-End Half Rail: Right-Hand Side - 76” Only (Not shown) Left Foot-End Half Rail: Left-Hand Side - 8
Résumé du contenu de la page N° 1
s ervice Manual for
Basic American’s Matrix 709 s eries
In s t r u c t Io n s Fo r u s e
et L/u L/c s A Appr o v ed
u L 60601-1
Iec 60601-2-38
c s A 22.2 601.1
Basic American Medical products is a division of GF Health products, Inc. 999-0807-190 • r ev d • 2011
Résumé du contenu de la page N° 2
Basic American Medical Products 336 Trowbridge Drive Fond du Lac, WI 54937 www.basicamerican.com For Matrix II Bed Service Parts please contact our Customer Service Department at 1-800-365-2338 GF Health Products, Inc. 2935A Northwest Parkway Atlanta, GA 30360 www.grahamfield.com To order a Matrix II Bed please contact a Graham Field Sales Representative at 1-800-554-9215 This service manual covers the following Matrix II Models: Full-electric with s tandard c aster c arriage: 76” Grid = Mp707
Résumé du contenu de la page N° 3
ABLE OF CONTENTS Foot rail bracket assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 19 T • Diagram, Parts, and Assembly Instructions Head & foot assist bars/rails . . . . . . . . . . . . . . . . . . . . 20 & 21 safety information and specifications • Diagram, Parts, and Assembly Instructions safety & warning information . . . . . . . . . . . . . . . . . . . . . . . 1 standard 4” extension pan . . . . . . . . . . . . . . . . . . . . . . . . . . 22 entrapment compliance information . .
Résumé du contenu de la page N° 4
AFETY & WARNING INFORMATION - please read before operation S This product is a variable height, adjustable mattress platform, which will provide comfort and convenience for residents/patients and caregivers in long term care settings. All Warning/Caution labels attached to the bed apply to any hazards or unsafe practices that could result in personal injury and/or property damage. DO NOT remove any Warning/Caution labels attached to the bed. Whenever you see this symbol ! please pay special
Résumé du contenu de la page N° 5
ntrapment compliance information E On March 10, 2006, the FDA (U.S. Food and Drug Administration) released long-awaited guidelines for reducing the risk of bed entrapment: “Hospital Bed System Dimensional and Assessment Guidance to Reduce Entrapment”. The new Guidance identifies potential entrapment areas and those body parts most at risk for entrap- ment; provides design criteria for manufacturers of new hospital/convalescent beds; recommends particular test methods to assess the conformance of
Résumé du contenu de la page N° 6
ED features & SPECIFICATIONS B The Matrix II Full-Electric Bed Series offers some outstanding standard and optional features all geared for safety and comfort. We have included both mechanical and electrical specifications below for your records. *We are excited to introduce a new Anti-Microbial Powder Coat Painting process which has been proven to inhibit the growth of damaging and disease causing microbes (bacteria, mold, fungus, algae, etc.) on the surface of coated items. Recorded result-red
Résumé du contenu de la page N° 7
ositioning Specifications P The Matrix II Bed Series has infinite positions that serve to help the patient The recommended maximum distance for the head function is 70˚. In the event be more comfortable and gives the practitioner easy access during procedures, of a power outage, it is preferred that the knee and back sections be lowered using transfers, etc. The correct placement of the bed is essential for the patient’s safety. an emergency battery pack. If unavailable, the sections can be set
Résumé du contenu de la page N° 8
PERATION OF STANDARD PENDANT/HAND CONTROLLER O Easy Patient Controls Raise = Each Matrix II Bed is equipped with a Lower = Head Up Head Down pendant-type hand control— standard. Each control function (head, bed, and knee) has two easily recognizable switches for up and down movement. The pendant can be easily disconnected to deactivate the patient control functions. Lower = Bed Down Raise = The controls are designed so that more Bed Up than one function can be activated simultaneously. To opera
Résumé du contenu de la page N° 9
PERATION OF OPTIONAL STAFF/NURSE CONTROL O part # 999-0775-901 Staff/nurse Controller STAFF CONTROL REFERENCE The staff/nurse control allows the caregiver to individually lock out all functions of only the pendant control. The Head LED Light Item 10 caregiver can also operate the bed from this panel without walking to the side of the bed. Foot LED Light Item 11 To Operate the Travel Controls Press the “HOLD SELECT” (#13) first, then the appropriate “UP” (#4, 6, or 8) OR “DOWN” (#5, 7, or 9) on
Résumé du contenu de la page N° 10
HEAD- & FOOTBOARDS Basic American Medical products, a division of GF Health products, Inc. • Matrix II • r ev d Manual p7
Résumé du contenu de la page N° 11
Standard Headboard and Footboard BORING DIAGRAM The diagrams below outline the manufacturer’s standardized headboard and footboard boring specifications. All of the dimensions are referenced from the center and bottom. Before making any significant variations to these dimensions, please contact the manufacturer. Basic American Medical products, a division of GF Health products, Inc. • Matrix II • r ev d Manual p8 Fo o t Bo Ar d HeAd Bo Ar d
Résumé du contenu de la page N° 12
ssembly - standard head and foot boards A 1. Assemble two Mounting Tubes (#4) to the Headboard (#1) and two to the Footboard (#2) using eight 1/4-20 x 4mm JCB-B Hex Drive Bolts (#6), going through the pre-drilled holes on the boards and into the eight 1/4-20 x .60” Long Threaded Inserts (#3) (already attached to the boards) as shown. Hand tighten only at this time. 2. Insert the Mounting Tubes into the Main Bed Frame Tubes so that the holes match up as shown. Secure with four 5/16 x 1-1/2” Cle
Résumé du contenu de la page N° 13
Standard Headboard and Footboard Assembly Standard beds do NOT include Staff Control. (Complete footboard assembly with staff control shown on page 11) t ube end c aps are t hreaded Inserts are pre-assembled on pre-assembled Mounting t ubes c lose-up of Hair on Footboard pin c lip (#8) inserted into hole in c levis pin (#7) t o safely remove Hair pin c lip grasp on circular end and pull. Tools Needed: (1) Phillips Screwdriver HEADBOARD t hreaded Inserts are pre-assembled on Headboard t ube end
