Résumé du contenu de la page N° 1
®
Turn to the Expertg
Owner's Manual
NOTE TO INSTALLER:
THIS MANUAL MUST BE LEFT WITH THE EQUIPMENT
USER.
USER: Please read all instructions in the manual and retain all
manuals for future reference.
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in
injury, death, or property damage.
Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
-Do not try to light any appliance.
-Do
Résumé du contenu de la page N° 2
TABLE OF CONTENTS WELCOME TO A NEW GENERATION OF COMFORT ... 2 FURNACE COMPONENTS .......................... 3 SAFETY CONSIDERATIONS ........................ 4 BEFORE STARTING YOUR FURNACE ................ 4 STARTING AND SHUTTING DOWN YOUR FURNACE .. 5 Steps for Starting Your Furnace .................. 5 Shutting Down Your Furnace .................... 7 PERFORMING ROUTINE MAINTENANCE ............ 7 Filtering Out Trouble ............................ 8 COMBUSTION AREA AND VENT SYSTEM .......... 10
Résumé du contenu de la page N° 3
FURNACE COMPONENTS A07609 Fig. 2 - Model 58MVC Furnace 1. Combustion-air intake connection to ensure contaminant- 11. Everlastic '_ Secondary condensing heat exchanger (inside). free air (right or left side). Wrings out more heat through condensation. Constructed with polypropylene-laminated steel to ensure durability. 2. Burner sight glass for viewing burner flame. 12. Primary serpentine heat exchanger (inside). Stretches fuel dollars with the S-shaped heat-flow design. Solid 3. Burner assembly
Résumé du contenu de la page N° 4
SAFETY CONSIDERATIONS Recognize safety information. This is the safety-alert symbol /_. When you see this symbol on the furnace and in instructions or manuals, be alert to the potential for personal iniury. Understand the signal words: DANGER, WARNING, and CAUTION. DANGER identifies the most serious hazards which will result in severe personal iniury or death. WARNING signifies hazards which could result in personal iniury or death. CAUTION is used to identify unsafe practices which may result i
Résumé du contenu de la page N° 5
BEFORE STARTING YOUR FURNACE FIRE AND EXPLOSION HAZARD Examine the furnace installation monthly to determine that: Failure to follow this warning could result in personal 1. All flue gas carrying areas external to the furnace (i.e. injury/death or property damage. chinmey, vent connector) are clear and free of obstructions. Should the gas supply fail to shut off or if overheating 2. The vent connector is in place, slopes upward and is occurs, turn off the manual gas valve to the furnace physical
Résumé du contenu de la page N° 6
A92185 Fig. 9 - Turn Off Electrical Supply A05100 Fig. 13 - Furnace Door Replaced A92359 A05099 Fig. 14 - Turn On Electrical Supply Fig. 10 - Remove Furnace Door i A06189 A04150 Fig. 15 - Open Valve Fig. 11 - Control Switch to OFF 7. Replace main furnace door. (See Fig. 13.) 8. Turn ON the electrical supply to the furnace and wait 1 minute. (See Fig. 14.) 9. Open the external manual gas valve. (See Fig. 15.) 10. Set the room thermostat to a temperature slightly above the room temperature. This w
Résumé du contenu de la page N° 7
12.Setyour thermostat to the temperature that satisfies your comfort requirements. SUGGESTION: Setting the thermostat back a few degrees and compensating for the difference with warmer clothing can make a big difference in your fuel consumption. The few degrees at the top of your thermostat "comfort level" are the most costly degrees to obtain. When the room temperature drops below the temperature selected on the thermostat, the furnace will switch on automatically. When the room temperature rea
Résumé du contenu de la page N° 8
(2.) Gently remove air filter and carefully turn the dirty side up (if dirty) to avoid spilling dirt from the filter. (See Fig. 26.) ELECTRICALSHOCK HAZARD c. Air Filter Located in Filter Cabinet: Slide air filter out of furnace. Keep dirty side up (if dirty) Failure to follow this warning could result in personal to avoid spilling dirt. (See Fig. 27 and 28.) iniury/death. 4. Inspect the filter. If torn, replace it. Turn off electrical power supply to your furnace before removing the access door
Résumé du contenu de la page N° 9
A06191 A93012 Fig. 22 - Removing Bottom Filter Cabinet Door Fig. 25 - Removing Filter Retainer from Latch \ A93010 A93013 Fig. 23 - Sliding Filter Retainer Sideways Fig. 26 - Removing Air Filter A93011 A00227 Fig. 24 - Slide Air Filter Out of Furnace Fig. 27 - Slide Side Filter Out of Furnace A00228 Fig. 28 - Slide Bottom Filter Out of Furnace
Résumé du contenu de la page N° 10
supplied. Use the filter tables and compare your furnace size with the proper filter size. A93205 Fig. 29 - Replace Blower Access Panel A06193 Fig. 32 - Replace Bottom Filter Cabinet Door FURNACE AIR FILTER TABLE AIR FILTER LOCATED IN BLOWER COMPARTMENT FURNACE FILTER SIZE - IN (mm) CASING FILTER WIDTH TYPE Side Return1-* Bottom Return* IN (mm) 17 1/2 (1) 16X25X3/4 (1) 16X25X3/4 Washable (445) (406 X 635 X 19) (406 X 635 X 19) (1) 16X25X3/4 1) 20 X 25 X 3/4 Washable 21 (533) (406 X 635 X 19) (50
Résumé du contenu de la page N° 11
COMBUSTION AREA AND VENT SYSTEM Visually inspect the combustion area and vent system before each heating season. Make sure that all PVC pipes leading into the combustion area and vent are free from any cracks and sags. CARBON MONOXIDE POISONING HAZARD Failure to follow this warning could result in personal iniury or death. If holes are found in the pipes or if any portion has A00223 become disconnected, toxic fumes can escape into your Fig. 33 - Remove Burner Enclosure Front home. DO NOT OPERATE
Résumé du contenu de la page N° 12
UNIT AND PROPERTY DAMAGE HAZARD Failure to follow this warning could result in damage to unit components. This furnace is designed for continuous return-air minimum temperature of 60 °F (15.6 ° C) db or intermittent operation down to 55°F (12.8°C) db, such as when used with a night setback thermostat. Return-air temperature must not exceed 85°F (29.4°C) db. If you choose to leave your furnace on during extended absences do not set your thermostat lower than the limits shown in the Caution box ab
Résumé du contenu de la page N° 13
BEFORE YOU REQUEST A SERVICE CALL If your furnace is not operating or not performing properly, you may save the expense of a service call by checking a few things yourself before calling for service. For Insufficient Airflow: Check for dirty air filter(s). Check for blocked return-air or supply-air grilles throughout your home. Ensure they are open and unobstructed. If problem still exists, call your dealer for service. If Furnace Fails to Operate: Follow this checklist step by step, advancing t
Résumé du contenu de la page N° 14
NOTE TO EQUIPMENT OWNER: For your convenience, please record the model and serial numbers of your new equipment in the spaces provided. This information, along with the installation data and dealer contact information will be helpful should your system require maintenance or service. FURNACE INSTALLATION INFORMATION: Model # Date Installed Serial # DEALERSHIP CONTACT INFORMATION: AIR CONDITIONER OR HEAT PUMP Company Name Model # Address Serial # Phone Number INDOOR COIL (Furnace Coil or Fan Coil
