Résumé du contenu de la page N° 1
INSTRUCTION BOOK
GB
Wok burner
3531 WK-m GB 949600835
1
Résumé du contenu de la page N° 2
Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. If you require further assistance
Résumé du contenu de la page N° 3
Table of contents Contents Page no For the user Your new appliance ...................................................................................... 2 Safety information ........................................................................................ 4 Description of the product ......................................................................... 5 Placement of grid ................................................................................. 5 Operating instructions ......
Résumé du contenu de la page N° 4
Safety information These warnings are provided in the Child Safety interests of your safety. Ensure you Young children must not be allowed to fully understand them before installing tamper with the wok or play with the or using the appliance. Your safety is of control. paramount importance. If you are unsure about the meaning of these The wok gets hot when it is in use. warnings contact the Customer Care Children should be kept away until the Department for assistance. wok has cooled.
Résumé du contenu de la page N° 5
Description of the product Burner Knob Placement of grid Guide pins for grid 5
Résumé du contenu de la page N° 6
Operating instructions The operating knob has a ring showing the scale of markings. Off. Max. flame and ignition position Min. flame 6
Résumé du contenu de la page N° 7
Burner cover/burner ring Together with the burner ring the burner Burner ring Burner cover cover forms a space where the final Correct mixture of gas and air takes place in order to make the gas burn correctly. Please note: It is consequently very important that the burner cover/ring is placed correctly on the burner. The burner ring has been provided with Wrong holes for the ignition electrode, and the thermo sensor. If the burner cover/ring are wrongly placed the burner will operate
Résumé du contenu de la page N° 8
The wok-unit has a special pan support which enables use of a wok pot with curved bottom. When using cooking utensils with a flat bottom the diameter of the utensils must not be less than 26 cm. 8
Résumé du contenu de la page N° 9
Ignition 1. Depress and turn the control knob for the burner, the left to Max. flame 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the burner will be ignited. Is not possible to connect the unit to mains, a match may be used to ignite the burner 3. After starting the burner, press the control knob for approx. 10 seconds to activate the automatic thermo couple. 4. Important Ignition position is at
Résumé du contenu de la page N° 10
Cleaning and maintenance For reasons of hygiene and safety, the cooking burner must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. The splashguard can be removed to make it easier to clean the surface. What to do: 1. Hold the splashguard as shown in the diagram. 2. Lift the splashguard straight up 3. Clean the top surface as described in “cleani
Résumé du contenu de la page N° 11
Stainless steel surfaces Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis. Always polish in the direction of the steel finish (cross- wise). Never use steel wool, metal sponges or other abrasive cleaning agents. Cleaning of gas burner Clean the c
Résumé du contenu de la page N° 12
Technical data Type of gas 240 V 1N + PE Adjusted for Natural, G-20 - 20mbar N L1 Category and pressures GB: II 20 - 28/37 mbar 2H3+ Max. nominal load Q, H : S Wok burner = 3,9 kW x 1 The hob must be connected via an Total= 3,9 kW external switch with a contact gap of min. 3 mm (the main switch FSD may be used) The unit features fully-secured gas taps (thermo-fuse). Cable type: 0,75 mm² HO5VV-F H = Gross calorific value S Q = Nominal load Voltage= 220-240 V AC Ignition transformer= 50 HZ - 0
Résumé du contenu de la page N° 13
Important safety requirments This hob must be installed in This hob must be installed by accordance with the Gas Safety qualified personnel to the (Installation and Use) Regulations relevant British Standards. (Current Edition) and the IEE Wiring Regulations (Current Any gas installation must be Edition). carried out by a CORGI registered installer. Detailed recommendations are contained in the following British The maufa
Résumé du contenu de la page N° 14
Gas connection Gas installation In accordance with local requirements for domestic gas cooking appliances. Gas installation must only be carried out by an authorised person. For gas types see technical data. Gas connection The gas intake is situated at the lower rear of the appliance. The intake has a ½" conical pipe thread (see fig 1) If the appliance is to be Fig 1 connected to a gas cylinder, conversion with the optional modification kit will be necessary. Pressure test The unit
Résumé du contenu de la page N° 15
Mounting Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm. Headroom The distance to any shelves or tops of a cabinet under the hob is to be at least 55 mm. Fixing Screw the fixing brackets out to such an extent that they can be turned in under the table top. Tighten the brackets on to the table top with
Résumé du contenu de la page N° 16
It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. The units externally measured length 145 mm: Cooker hood 290 mm: Two-zone ceramic-top electric hob Two-burner gas hob Grill Fryer Wok 580 mm: Four-zone ceramic-top electric hob Four-burner gas hob 725 mm: Four-zone ceramic-top electric hob Installation of a single unit When mounting a single un
Résumé du contenu de la page N° 17
Something not working If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the hob is under guarantee. Sympton: Solution There is no spark when lighting the Check hob is connected to the gas electricity supply. Check the fuse and replace if necessery. When the operating knob is released The operat
Résumé du contenu de la page N° 18
Service & spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area. In-guarantee customers should ensure that the recommended checks under the heading "Something Not Working" have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Ple
Résumé du contenu de la page N° 19
Guarantee conditions AEG offer the following guarantee to 6. The purchaser's statutory rights are the first purchaser of this appliance: not affected by this guarantee. 1. The guarantee is valid for 12 months commencing when the European guarantee appliance is handed over to the first If you should move to another country retail purchaser, which must be within Europe then your guarantee verified by purchase invoice or moves with you to your new home similar documentation.
Résumé du contenu de la page N° 20
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local service organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0) 344 62 29 29 Germany Nürnberg +49 (0) 800 234 7378 Italy Pordenone +39 (0) 800 117511 Sweden Stockholm +46 (0) 8 672 53 60 UK Slough + 44 (0) 1753 219899 20
