Résumé du contenu de la page N° 1
Owner’s
Manual
Model No.
XT600
XT800
�Assembly
�Operation
�Adjustments
�Parts
�Warranty
Caution:
Read and understand
this manual before
operating unit.
Retain For Future Reference
Résumé du contenu de la page N° 2
Table of Contents Product Registration……………………………………………………………………………..2 Important Safety Instructions……………………………………………………………….…..3 Important Electrical Information…………………………………………………………….…..4 Important Operation Instructions…………………………………………………………….…5 Assembly instructions……………………………………………………………………………6 Folding & Transport Instructions…………..………………………………………………….14 Operation of Your New Treadmill…………………………………………………………….15 Programmable Features……………………………………………………………………….18 Target Heart Rate…………………………
Résumé du contenu de la page N° 3
CONGRATULATIONS ON YOUR NEW TREADMILL! Thank you for your purchase of this quality treadmill from Flaman Fitness. Your new treadmill was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Flaman Fitness will do all we can to make your ownership experience as pleasant as possible for many years to come. The local dealership where you purchased this treadmill is your administrator for all w
Résumé du contenu de la page N° 4
IMPORTANT SAFETY INFORMATION THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL CAUTION: Before starting any exercise program, it is recommended that you consult your physician. WARNING: Connect this unit to a properly grounded outlet only. DANGER: To reduce the risk of electric shock, always unplug the treadmill from the electrical outlet immediately after using and before cleaning. WARNING To reduce the risk of burns, fire, electric shock, or injury
Résumé du contenu de la page N° 5
Safety Precautions Thank you for purchasing our product. Even though we go to great efforts to ensure the quality of each product we produce, occasional errors and /or omissions do occur. In any event should you find this product to have either a defective or a missing part please contact your nearest Flaman Fitness. Contact information on page 2. This product has been designed for home use only. Product liability and guarantee conditions will not be applicable to products being subjected to pr
Résumé du contenu de la page N° 6
Important Electrical Information WARNING! NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels. NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact
Résumé du contenu de la page N° 7
NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually. NEVER use your treadmill during an electrical storm. Surges may occur in your household power supply that could damage treadmill components. Use caution while pa
Résumé du contenu de la page N° 8
Assembly Instructions (XT600) HARDWARE LIST #145. 8m/m #138. 5/16” x 15m/m Tooth Washer (4pcs) Button Head Bolt (8 pcs) #134. 5/16” x 2” #140. 8 x 23 x 1.5T Button Head Bolt (4pcs) Curved Washer (4pcs) #137. 5/16” x 1-1/2” #139. 8 x 23 x 1.5T Button Head Bolt (2pcs) Flat Washer (4pcs) # 93.5/16” x 2-3/4” #135. 3.5 x 40m/m Hex Head Bolt (2pcs) Self Tapping Screw (6 pcs) #30.Lubricant (1pc) #81.Safety Key (1pc) #142.M6 Allen Wrench (1pc) #141. Combination M5 Allen Wrench & Screw Driver (1 pc) 6
Résumé du contenu de la page N° 9
ASSEMBLY (XT600) It will take two people to assemble your unit. STEP 1 Remove all the components from the carton. STEP 2 Remove the bottom side covers that are pre-assembled on the frame. Connect the computer extension wire (50) to the lower computer wire (49). NOTE: Ensure that the wire is safely inserted in the upright to avoid pinching the computer wire. STEP 3 Insert the right upright (4) into the frame base (2) through the bottom right side cover (64). Secure the reaming holes with four 5
Résumé du contenu de la page N° 10
Assembly drawing (XT600) 8
Résumé du contenu de la page N° 11
Assembly Instructions (XT800) HARDWARE LIST #108.3/8" x 2.0T #122. 10m/m Spring Washer (2pcs) Raised Washer (2pcs) #102. 5/16” x 15m/m Button #103. 3/8” x 2” Button Head Socket Screw (6pcs) Head Socket Screw (2pcs) #121. 8m/m #109. 8 x 23 x 1.5T Raised Washer (2pcs) Flat Washer (4pcs) #106. 5/16” x 1-1/2” Button #110. 8 x 23 x 1.5T Head Socket Screw (2pcs) Curved Washer (4pcs) #101. 5/16” x 2” Button #105.5/16” x 2-3/4” Head Socket Screw (4pcs) Hex Head Screw (2pcs) 9
Résumé du contenu de la page N° 12
#84. M5 #104. 5/16” x 1-3/4” Button Iron Plate Nut (4 pcs) Head Socket Screw (4pcs) #87. 5 x 16m/m #92. 5 x 16m/m Tapping Screw (2 pcs) Tapping Screw (6 pcs) #107. 3.5 x 40m/m Self Tapping Screw (6 pcs) #63.Safety Key (1pc) #113. 12m/m Wrench (1 pc) #18.Lubricant (1pc) #111. Combination M5 Allen Wrench #112.M6 Allen Wrench (1pc) & Screwdriver (1 pc) 10
Résumé du contenu de la page N° 13
ASSEMBLY (XT800) Assembly Unpack the treadmill and locate the hardware pack. The hardware pack is separated into: one section containing tools and four sections labeled steps 1- 4 which contain the hardware needed for assembly of each step. The assembly steps below are numbered one through four and correspond to the hardware in the numbered sections of the hardware pack. Remove only the hardware for the step you are currently assembling to avoid confusion and mix-ups. STEP 1 1. Take the Right Ha
Résumé du contenu de la page N° 14
STEP 3 1. Install Handpulse Tube (7) onto the inside of the Left and Right Handrails (4,5) with 4pcs of 5/16” x 1-3/4” Button Head Socket Screws(104) and 4pcs of 8 x 23 x 1.5T Curved Washers (110 by using the Combination M5 Allen Wrench & Screwdriver (111)(hand tighten only). Carefully feed the wires on the sides into the center hole in the Handrail and snake them out of the top of the Handrails (4,5). 2. Install the Handrail Support (3) into the Left and Right Handrails (4,5) with 4pcs of 5/16”
Résumé du contenu de la page N° 15
Assembly drawing (XT800) 13
Résumé du contenu de la page N° 16
XT600 Folding Instructions Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the desired position. To Fold The Treadmill: Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it is secured by the locking telescoping tube assembly in center back of base. To Unfold The Treadmill: Apply slight forward pressure* on the treadmill runni
Résumé du contenu de la page N° 17
Operation of Your Treadmill Getting familiar with the control panel XT600 / XT800 Console Getting started: Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as the treadmill will not power on without it. When the power is turned on, all the lights on the display will light for a short time. Then the Time and Distance windows will display Odometer
Résumé du contenu de la page N° 18
Quick-Start Operation: STEP 1: Press and release the Start key to wake display up (if not already on). Note: Installing the tether key will also wake up the console. STEP 2: Press and release the Start key to begin belt movement, at .5 mph, then adjust to the desired speed using the Fast / Slow keys (console or hand rail). You may also use the rapid speed keys 2 through 12 to adjust the speed. STEP 3: To slow tread-belt press and hold the Slow key (console or hand rail) to the desired speed. You
Résumé du contenu de la page N° 19
1/4 Mile Track: The 1/4 mile track will be displayed around the dot matrix window. The flashing dot indicates your progress. Once the 1/4 mile is complete this feature will begin again. Pulse Grip Feature: The Pulse (Heart Rate) console window will display your current heart rate in beats per minute during the workout. You must use both stainless steel sensors on the front cross bar to display your pulse. Pulse value displays anytime the upper display is receiving a Grip Pulse signal. You may no
Résumé du contenu de la page N° 20
Programmable Features The treadmill offers 7, factory preset programs, 2 user defined programs and one Manual program. Each preset program has a maximum speed level that is displayed when a desired workout is chosen. The maximum speed that the particular program will achieve will be displayed in the Speed window. Also included are two user programs (User 1 and User 2) for custom workouts. To Select a Program: STEP 1: Press the desired PROGRAM key. Press enter to select the program. The display w
