Résumé du contenu de la page N° 1
Model No. PFTL43105.3
Serial No.
USER'S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.proformservice.com
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
www.proform.com
this equipm
Résumé du contenu de la page N° 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OPERA
Résumé du contenu de la page N° 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure see your local electronics store. that all users of this treadmill are adequately informed of all warnings and precautions. 12. Failure to use a properly functioning surge suppressor could result in damage to the con- 2. Use the treadmill only as described
Résumé du contenu de la page N° 4
21. When folding or moving the treadmill, make maintenance and adjustment procedures de- sure that the storage latch is fully closed. scribed in this manual. Never remove the motor hood unless instructed to do so by an 22. Inspect and properly tighten all parts of the authorized service representative. Servicing treadmill regularly. other than the procedures in this manual should be performed by an authorized ser- 23. Never insert any object into any opening. vice representative only. 24.DANGER:
Résumé du contenu de la page N° 5
BEFORE YOU BEGIN ® Thank you for selecting the new PROFORM 595 Pi number and serial number before calling. The model treadmill. The 595 Pi treadmill offers an impressive se- number of the treadmill is PFTL43105.3. The serial lection of features designed to make your workouts at number can be found on a decal attached to the tread- home more effective and enjoyable. And when you’re mill (see the front cover of this manual for the location). not exercising, the 595 Pi treadmill can be folded up,
Résumé du contenu de la page N° 6
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal con
Résumé du contenu de la page N° 7
2. Orient the Right Upright (36) so the square hole near the 2 44 lower end is in the position shown. Attach the Right 36 Upright to the Upright Base (48) with two Upright Bolts 89 (40) and two Upright Star Washers (39). Do not tighten 47 45 the Upright Bolts yet. 44 45 Attach each Wheel (45) to the Upright Base (48) with a 44 Wheel Bolt (89), two Wheel Spacers (44), and a Nut (47) 47 as shown. Do not overtighten the Wheel Bolts; the 89 Wheels should turn freely. Square Hole 39 48 40 3. Cut the
Résumé du contenu de la page N° 8
5. Identify the Right Handrail Endcap (91), which does not 5 have a cutout in the bottom, and slide it onto the lower end of the Right Handrail (11). Make sure that the screw 20 18 hole in the Right Handrail Endcap is at the bottom. Next, hold the Right Handrail near the Right Upright (36), and 19 insert the Wire Harness (28) into the hole in the bottom 28 of the Handrail and out of the indicated hole in the top. 31 Then, remove the tie from the Wire Harness. 20 Set the Right Handrail (11) on th
Résumé du contenu de la page N° 9
8. Lower the Uprights (31, 36) until the Handrails (11, 18) 8 32 are touching the floor. 31, 36 See the lower drawing. Position the Uprights (31, 36) so 40 the treadmill Frame (74) is centered between them. Firmly tighten the four Upright Bolts (40) and the two 11, 18 Frame Bolts (32). Be careful not to overtighten the Frame Bolts. Top View 31 36 74 9. Attach the end of the ground wire on the Wire Harness 9 (28) to the indicated small hole in the Upright Base (48) with a Silver Ground Screw (
Résumé du contenu de la page N° 10
10. Remove the knob from the pin. Make sure that the collar 10 and the spring are on the pin as shown. Insert the pin into the Latch Housing (30), and tighten the knob back Knob onto the pin. 30 Pin Spring Collar 11. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a m
Résumé du contenu de la page N° 11
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding Your treadmill features a walking belt coated with high- plug. Plug the power cord into a surge suppressor, performance lubricant. IMPORTANT: Never apply sil- and plug the surge suppressor into an appropriate icone spray or other substances to the walking outlet that is properly installed and grounded in belt or the walking platform. Su
Résumé du contenu de la page N° 12
CONSOLE DIAGRAM Note: If there are thin sheets of plastic Clip on the console, remove the plastic. Key FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The treadmill console offers an array of features de- Plug in the power cord (see signed to make your workouts more effective. When page 11). Next, locate the the manual mode of the console is selected, the speed reset/off circuit breaker on Reset and incline of the treadmill can be changed with the the treadmill frame near the touch of a button.
Résumé du contenu de la page N° 13
Change the incline of the treadmill as desired. HOW TO USE THE MANUAL MODE 4 To change the incline of Insert the key into the console. the treadmill, press the 1 Incline increase and de- See HOW TO TURN ON THE POWER on page crease buttons. Each time 12. a button is pressed, the incline setting will change by 0.5%; if a button is held down, the incline set- Select the manual mode. 2 ting will change quickly. When the key is inserted, the manual mode will be Monitor your progress with the displ
Résumé du contenu de la page N° 14
To reset the displays, press the Stop button, re- Turn on the fan if desired. 7 move the key, and then reinsert the key. To turn on the fan, press the Fan button. To turn Measure your heart rate if desired. on the fan at high speed, press the button a sec- 6 ond time. To turn off the fan, press the button a Before using third time. Note: If the fan is left on when the walk- the handgrip ing belt is stopped, the fan will automatically turn pulse sensor, off after a few minutes. remove the sheets
Résumé du contenu de la page N° 15
When the first period is completed, all speed set- HOW TO USE A TRAINER PROGRAM tings will move one column to the left. The speed setting for the second period will then be shown in Insert the key into the console. the flashing Current Period column and the tread- 1 mill will automatically adjust to the speed and in- See HOW TO TURN ON THE POWER on page cline settings for the second period. Note: If all six 12. of the indicators in the Current Period column are lit, the speed settings may move d
Résumé du contenu de la page N° 16
the matrix. (The incline settings are not shown in HOW TO CREATE A CUSTOM PROGRAM the matrix.) To program a speed setting and an in- cline setting for the first period, simply adjust the Insert the key into the console. speed and incline of the treadmill as desired by 1 pressing the Speed and Incline buttons. Every few See HOW TO TURN ON THE POWER on page times a Speed button is pressed, an additional in- 12. dicator will appear or disappear in the Current Period column. Select a custom program.
Résumé du contenu de la page N° 17
When only three seconds remain in the first period HOW TO USE A CUSTOM PROGRAM of the program, both the Current Period column and the column to the right will flash, a series of Insert the key into the console. tones will sound, and the speed setting and the in- 1 cline setting will flash. When the first period ends, See HOW TO TURN ON THE POWER on page all speed settings will move one column to the left. 12. The speed setting for the second period will then be shown in the flashing Current Per
Résumé du contenu de la page N° 18
THE INFORMATION MODE/DEMO MODE An “E” for English miles or an “M” for metric kilometers will The console features an information mode that keeps appear in the Speed display. track of the total number of miles or kilometers that the Press the Speed increase but- walking belt has moved and the total number of hours ton to change the unit of mea- that the treadmill has been operated. The information surement, if desired. mode also allows you to select miles or kilometers as the unit of measurement
Résumé du contenu de la page N° 19
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the pla
Résumé du contenu de la page N° 20
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Pivot the frame down until it is past the latch pin. Storage Latch 2. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of in- jury, do not lower the frame by gripping only the plastic foot rails. Do not drop the frame to the floor. Make sure to bend your legs and keep your back straight. Frame 20
