Résumé du contenu de la page N° 1
HT402T
Owner’s Manual
HEALTH TRAINER 402t TREADMILL
Customer Service
(888) 340-0482
Keys Fitness Products
4009 Distribution Drive
Suite 250
Garland, TX 75041
www.keysfitness.com
Model Name : HT402t
Serial Number :
Purchase Date :
Write down for future reference
Serial Number Decal Location
415-00014
09/05 Rev. B
Résumé du contenu de la page N° 2
Table of Contents Important Safety Information 3 Before You Start 4 Assembly 5-7 Warm Up Exercises 8 Moving Instructions 9 Power Requirements 10 Console Panel Functions 11-12 Program and Operation 13 Belt Adjustment 14 Maintenance Instructions 15 Troubleshooting Guide 16 Error Messages 17 Parts List 18 Exploded View 19 Warranty Information 20 2
Résumé du contenu de la page N° 3
Important Safety Information WARNING! Before using this treadmill or starting any exercise program, consult your physician. This is espe- cially important for persons over the age of 35 and/or persons with pre-existing health problems. The man- ufacturer or distributor assumes no responsibility for personal injury or property damage sustained by or through the use of this product. WARNING! To reduce the risk of electrical shock, burns, fire, or other possible injuries to the user, it is impor- t
Résumé du contenu de la page N° 4
Before You Start Thank you for purchasing the HEALTH TRAINER 402t Treadmill! This quality product you have chosen was designed to meet your needs for cardiovascular exercise. Before you start, please read the Owner's Manual and become familiar with the operation of your new treadmill. Remember to take the time to perform the stretching exercises provided to avoid injury. Do not stand on the walking belt while pressing the Power button or Start/Stop button. Always adjust the speed of the treadmil
Résumé du contenu de la page N° 5
Assembly The HEALTH TRAINER 402t treadmill will require assembly before operating. After opening the box, remove any packing material from the treadmill. Do not throw away any packing materials until the unit is working properly. Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet. Locate the hardware pack and identify the following parts required for assembly. Assembly Parts: 1. Owner’s Manual 2. Console Assembly 3. Left and Right Uprig
Résumé du contenu de la page N° 6
Assembly Assembly requires the included allen wrench and your own phillips screwdriver. Do not plug in the power cord until all assembly step are completed. 1. With the treadmill deck in the down position, leave the unit on the original packing material to assemble all parts.Refer to Figure 1. Figure 1: Deck in down position 2. Feed the cable thru the Right Upright until the connector is exposed. Install Right Upright to base using 4 Allen Bolts M8*15mm and Four Arc Washers. Hand tighten all
Résumé du contenu de la page N° 7
Assembly 4. Attach the top rail to the left and right uprights using 2 Allen Bolts M5*15 and 2 Arc Washers. You may now firmly tighten all hardware. Refer to Figure 4. Note: Be careful not to pinch the wire harness. Figure 4: Top Rail Assembly CONSOLE 5. Remove the four M5*20mm screws from the back of the console. Set aside. Connect Console Wire Harness being careful not to pinch the wires. Using four screws previously removed from console, attach console to the Top Rail. Refer to Figure 5.
Résumé du contenu de la page N° 8
Warm Up Exercises EXERCISE GUIDELINES WARNING! Before beginning this or any exercise program, you should consult your physician. This is espe- cially important for individuals over the age of 35 or individuals with pre-existing health problems. Warming up prepares the body for the exercise by increasing circulation, supplying more oxygen to the mus- cles and raising body temperature. Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up. The photos on this page sho
Résumé du contenu de la page N° 9
Moving Instructions CAUTION! TO AVOID THE RISK OF INJURY, NEVER ATTEMPT TO MOVE THE TREADMILL WHILE IT IS IN THE UNFOLDED OPERATING POSITION. TO REDUCE THE POSSIBILITY OF INJURY WHILE LIFTING, BEND YOUR LEGS AND KEEP YOUR BACK STRAIGHT. AS YOU RAISE THE TREADMILL, LIFT USING YOUR LEGS, NOT YOUR BACK. IN ORDER TO RAISE OR LOWER THE TREADMILL SAFELY, YOU MUST BE ABLE TO LIFT 45 POUNDS (20KG). IT IS SUGGESTED YOU ALWAYS USE THE AID OF A SECOND PERSON WHEN MOVING THE TREADMILL. With the treadmill
Résumé du contenu de la page N° 10
Power Requirements IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT IF IT WILL NOT FIT THE OUTLET HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELEC- TRICIAN. This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges
Résumé du contenu de la page N° 11
Console Overview CONSOLE FUNCTIONS: There is one display windows on the control panel to provide feedback information. This window will display information on the following functions: TIME Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds). SPEED Indicates MPH (miles per hour) in .1 increments. DISTANCE: Indicates Miles .01 increments up to 99.99. CALORIES Indicates calories burned from 0 up to 999. 11
Résumé du contenu de la page N° 12
Console Overview CONSOLE BUTTONS: There are 8 Console button. POWER: Used to turn unit off and on. START: Used to Start unit. STOP: Used to Stop unit. RESET: Used to Reset values in display window. PROGRAM: Used to toggle thru five preset programs. MODE: Used to toggle thru different modes. SPEED +/-: Used to increase and decrease Speed. Also used to scroll thru modes. 12
Résumé du contenu de la page N° 13
Program and Operation MODE OVERVIEW: This treadmill had 5 different exercise modes. Following as a brief overview and instruction for each mode. MANUAL MODE: Allows user to manually adjust Speed with + or - buttons. Time, Calories and Distance count up from 0. To use Manual Mode, Attach safety key. Press Start button. You are in now in Manual Mode.You may adjust the speed of the treadmill using the + - buttons. Press Stop to end workout. TIME CONTROL MODE: Allows user to set Time of exerc
Résumé du contenu de la page N° 14
Belt Adjustment WARNING! Do not over-tighten rollers! This will cause prema- ture roller bearing failure! Belt adjustment and tension performs two functions: adjustment for tension and centering. Your new treadmill comes pre-adjusted from the factory for tension and centering. Please follow the procedures below if the belt shifts to the left or right while walking: WALKING BELT IS SHIFTING TO THE LEFT (Diagram 1) First, turn treadmill on to run at 1 mph. Using the hex key provid- ed, turn the
Résumé du contenu de la page N° 15
Maintenance Instructions WARNING! Before performing any maintenance to your treadmill, always unplug the power cord from the surge protector. CLEANING Routine cleaning of your HT402t Fitness treadmill will extend the life of your treadmill. WARNING! To pre- vent electrical shock, be sure the power to the treadmill is OFF and the unit unplugged from the wall electrical outlet before attempting any cleaning or maintenance. AFTER EACH WORKOUT: Wipe off the console and other treadmill surfaces with
Résumé du contenu de la page N° 16
Troubleshooting Guide Treadmill will not start. 1. Is the Safety Key inserted into the treadmill Console? 2. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet, and the surge protector is turned on. (Refer to “Power Requirements” on page 11). 3. Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait five minutes and then press the switch back in. 4. Check the house e
Résumé du contenu de la page N° 17
Error Messages Treadmill Error Messages. Your treadmill is equipped with a software package that enables error messages to be displayed when there is a problem. The following error codes will be displayed in the console display windows. Error Messages Er01 - The console and controller are disconnected. Check cable connections. Er02 - The motor control board and motor are disconnected. Check cable connections. Er03 - The motor controller is not receiving a signal from the speed sensor. Check t
Résumé du contenu de la page N° 18
Parts List HT402T Parts List Rev A REF # PART # DESCRIPTION QTY REF # PART # DESCRIPTION QTY 1 423-00027 TOP RAIL, HT402T 1 31 402-00130 CHAMBER BOLT, M6X30 6 2 423-00028 LEFT UPRIGHT, HT402T 1 32 402-00015 PHILIP SCREW ST4.2*16 12 3 423-00029 RIGHT UPRIGHT, HT402T 1 33 402-00031 PHILIP SCREW ST4.2*13 4 4 423-00030 BASE FRAME, HT402T 1 34 402-00019 PHILIP SCREW ST4.2*13 2 5 423-00031 LEFT DECK FRAME, HT402T 1 35 402-00016 PHILIP SCREW ST4.2*13 10 6 423-00032 RIGHT DECK FRAME, HT402T 1 36 402-001
Résumé du contenu de la page N° 19
48 3 1 50 11 27 52 45 11 2 59 30 51 57 7 54 27 20 44 58 6 19 47 34 43 46 48 36 56 4 55 18 24 28 27 53 9 21 32 26 39 49 14 25 33 15 23 8 38 12 17 42 22 41 40 35 31 13 5 37 29 10 19 23 16 Exploded View 19
Résumé du contenu de la page N° 20
Warranty Information HT402t Treadmill designed and distributed by KEYS FITNESS PRODUCTS, LP – LIMITED WARRANTY PLEASE CONSULT YOUR PHYSICIAN BEFORE USING THIS PRODUCT. This Limited Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period on the HT402t to the original purchaser is (Lifetime) on the frame, (1) year on the motor and (6) months parts which includes walking deck and b
