Résumé du contenu de la page N° 1
USER’S MANUAL
EVO2 MOTORIZED TREADMILL
MODEL NUMBER: EVO2
USER WEIGHT LIMITATION: 400lbs. (180kgs.)
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167
SERIAL NUMBER (found on frame):
V-04-20051005
Résumé du contenu de la page N° 2
2 EVO2 MOTORIZED TREADMILL PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth Fitness treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and informatio
Résumé du contenu de la page N° 3
3 EVO2 MOTORIZED TREADMILL POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden volta
Résumé du contenu de la page N° 4
4 EVO2 MOTORIZED TREADMILL PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer. Gather your tools: Before starting the assembly of your unit, make su
Résumé du contenu de la page N° 5
5 EVO2 MOTORIZED TREADMILL HARDWARE COMPARISON CHART Hardware chart: For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. NO. DESCRIPTION QTY. M6 x 20mm Console Screw 5 2 11 #8 x 12mm Screw 8 21 M8 x 80mm Allen Head Bolt 2 22 Metal Cap 2 #2 Connect Handlebar 23 Slices 2 31 M6 x 12mm Screw 4 32 Plastic Cover 2 35 M8 x 15mm Allen Head Bolt 4
Résumé du contenu de la page N° 6
6 EVO2 MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 1 Computer 1 EVO2-01 30 Console Support Tube 1 EVO2-30 2 Safety Key 1 EVO2-02 31 M6 x 12mm Screw 4 EVO2-31 3 Console Support Tube 1 EVO2-03 32 Plastic Cover 2 EVO2-32 4 Wire Protect Key 1 EVO2-04 33 M6 x 55mm Bolt 2 EVO2-33 5 M6 x 20mm Console Screw 2 EVO2-05 34 6 x 13mm Washer 15 EVO2-34 6 Rubber Dots 1SET EVO2-06 35 M8 x 15mm Allen Head Bolt 4 EVO2-35 Handlebar Rear End
Résumé du contenu de la page N° 7
7 EVO2 MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 59 Rail Guide 8 EVO2-59 89 Plastic Clamp - Bottom 2 EVO2-89 60 M8 x 25mm Screw 10 EVO2-60 90 Bracket 2 EVO2-90 61 Running Deck 1 EVO2-61 91 M8 x 19mm Allen Head Bolt 4 EVO2-91 62 Deck Cushion 10 EVO2-62 92 Rear Roller 1 EVO2-92 63 M10 x 35mm Bolt 9 EVO2-63 93 Rear Roller Shaft 1 EVO2-93 64 Elevation Motor 1 EVO2-64 94 M8 x 43mm Bolt 2 EVO2-94 65 Clip 2 EVO2-65 95 Deck Whee
Résumé du contenu de la page N° 8
1 28 2 29 19 104 4 7 23 3 11 5 12 104 19 11 14 2 4 30 116 16 8 9 12 10 18 23 14 11 20 21 22 0 1 3 31 17 13 2 18 0 22 21 116 25 103 31 26 15 27 8 EVO2 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. 108 108 48 49 107 114 46 108 108 107 47 110 32 111 31 107 105 35 115 32 42 33 108 108 31 34 107 35 36 39 107 34 39 33 37 39 38 106 41 44 108 40 39 38 43 109 44 48 42 41 45 42 44 45 44 34 50 34 50 51 51 Visit us at:
Résumé du contenu de la page N° 9
9 EVO2 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.com
Résumé du contenu de la page N° 10
10 EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 1: Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG-1. Remove the pre-assembled M6 x 55mm Bolt (33) and 6 x 13mm Washer (34) from lower upright. Make sure to connect the wires from the Left Upright (26) to the Base Frame (43). Then insert the Left and Right Uprights (26 and 27) into the Base Frame (43) and secure with two M6 x 55mm Bolts (33), 6 x 13mm Washers (34) and four M8 x 15mm Alle
Résumé du contenu de la page N° 11
11 EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 2: Rotate the Computer (1) up to the correct position as shown in FIG-2 and secure in place using two M6 X 20mm Screws (5). FIG-2 1 1 5 Visit us at: www.evofitness.com
Résumé du contenu de la page N° 12
12 EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 3: Attach the Cross Brace (25) to the Left and Right Uprights (26 and 27) using two M8 x 80mm Allen Head Bolts (21) and Metal Caps (22). Do not fully tighten the M8 x 80mm Allen Head Bolts (21). Insert the Console Tray (29) into the back of the Computer (1) and secure using one M5 x 12mm Screw (28). Do not fully tighten the M5 x 12mm Screw (28). Attach the Console Support Tube (30) to the Cross Brace (25) using one M8 x 25mm Screw (24
Résumé du contenu de la page N° 13
13 EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 4: Connect the wires from the Left Handlebar (16) and Left Upright (26). Attach the Left Handlebar (16) to the Left Upright (26) using two M8 x 50mm Allen Bolts (104) and one Connection Plate (23). Repeat this procedure to attach the Right Handlebar (17) to the Right Upright (27). CONNECT WIRES 27 26 Visit us at: www.evofitness.com
Résumé du contenu de la page N° 14
14 EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 5: Connect the wires from the Front Handlebar (13) and Left Upright (26). Attach the Front Handlebar (13) to the Left and Right Uprights (26 and 27) using two M6 x 12mm Screws (31). Visit us at: www.evofitness.com
Résumé du contenu de la page N° 15
15 EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 6: Attach the Left # 1 Handlebar Rear End Cap (7) and Left # 2 Handlebar Rear End Cap (8) to the Left Upright (26) using two Plastic Fixing Inserts (12) and four #8 x 12mm Screws (11). Attach the Right # 2 Handlebar Rear End Cap (9) and Right # 1 Handlebar Rear End Cap (10) to the Right Upright (27) using two Plastic Fixing Inserts (12) and four #8 x 12mm Screws (11). 10 11 12 8 9 7 11 27 11 12 26 Visit us at: www.evofitnes
Résumé du contenu de la page N° 16
16 EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 7: Attach one Plastic Cover (32) to the Left Upright (26) using one M6 x 12mm Screw (31). Repeat this procedure for the Right Upright (27). Visit us at: www.evofitness.com
Résumé du contenu de la page N° 17
17 EVO2 MOTORIZED TREADMILL ASSEMBLY STEP 8: Attach the Upright Plastic Shroud Left #3 (105), Upright Plastic Shroud Left #1 (46) and Upright Plastic Shroud Left #2 (47) to the Left Upright (26) and secure with four #8 x 19mm Screws (107) and six #8 x 15mm Screws (108). Repeat this procedure for the Right Upright (27). 108 107 108 27 48 108 107 49 26 108 107 47 107 108 46 107 108 Visit us at: www.evofitness.com
Résumé du contenu de la page N° 18
18 EVO2 MOTORIZED TREADMILL TRANSPORT INSTRUCTIONS TRANSPORT INSTRUCTIONS: To roll away for storage simply grab the rear deck, lift slightly and roll to desired location. Visit us at: www.evofitness.com
Résumé du contenu de la page N° 19
19 EVO2 MOTORIZED TREADMILL MAINTENANCE HOW TO MAINTAIN THE EVO2 TREADMILL: Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper maintenance could cause damage or shorten the life of your treadmill and exceed the LIMITED WARRANTY coverage. • Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight. • Inspect and tighten all
Résumé du contenu de la page N° 20
20 EVO2 MOTORIZED TREADMILL MAINTENANCE CLEANING: Routine cleaning of your treadmill will extend the product's life. • Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged from the wall electrical outlet before attempting any cleaning or maintenance. • Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight. • Af
