Résumé du contenu de la page N° 1
LTR20091032, Rev. A
12/16/08
Résumé du contenu de la page N° 2
Delivery and Set-Up . . . . . . . . . . . . 1 . . . . . . . . Read This First! Planning the Best Location for Your Spa Wrap . . . 1 . Carefully read and follow all safety instructions. Preparing a Good Foundation . . . . . . . . . . 1 . . . . . . . . When installing and assembling your spa wrap, it is recommended that two or more people be Spa Wrap Assembly . . . . . . . . . . . . 2 . . . . . . . . . involved. Tools and Materials . . . . . . . . . . . . . . 2 . . . . . . . . . . . . Do not
Résumé du contenu de la page N° 3
Delivery and Set-up 1 Delivery and Set-Up Planning the Best Location Preparing a Good Foundation for Your Spa Wrap Your spa wrap needs a solid and level foundation. The area that it sits on must be able to support the weight Most cities and counties require permits for exterior of the spa wrap and the occupants who use it. If the construction and electrical circuits. In addition, some foundation is inadequate, it may shift or settle after communities have codes requiring residential barrie
Résumé du contenu de la page N° 4
2 Spa Wrap Assembly The following will tell you how to assemble your spa that will enable you to determine where the edges of wrap. If you have any questions, problems with material the spa will be located. When done, mark the corner and/or parts, please contact your local retailer. locations. Upon delivery of your new Cal Spa, notify the installation crew that you have determined where NOTE: It is strongly advised that you have a licensed you want the spa located. professional install th
Résumé du contenu de la page N° 5
Spa Wrap Assembly 3 Figure 1. Exploded view of SW-100 and SW-400 2009 Spa Wraps www.calspas.com LTR20091032, Rev. A
Résumé du contenu de la page N° 6
4 Figure 2. SW-400 Assembly 2009 Spa Wraps www.calspas.com LTR20091032, Rev. A Spa Wrap Assembly
Résumé du contenu de la page N° 7
Spa Wrap Assembly 5 Seam and Joint Finishing After you have unpacked all of the pieces and have put them in place around your spa, you may wish to apply grout and stucco to the seams to give your spa wrap a more “finished” appearance. Note: When access is needed inside your spa, the seams will need to be split. When work inside the spa is finished, the seams will need to be refinished, so plan accordingly. 1. Prepare and fill the gap or seam line with speed set. 2. Using your fingertips, push
Résumé du contenu de la page N° 8
6 7. Let the grout and stucco dry for at least three hours. 2009 Spa Wraps www.calspas.com LTR20091032, Rev. A Spa Wrap Assembly
Résumé du contenu de la page N° 9
Installing Your Spa Wrap Fireplace 7 Installing Your Spa Wrap Fireplace Safe and satisfactory operation of your new fireplace spa wrap depends upon its proper installation. Installation, adjustments and service must be performed by L.M.S. qualified installers and service technicians to ensure proper operation and prevent accidents. LP Gas Requirements Check the rating plate to make sure the gas supply you are hooking up to is the gas type the fireplace is manufactured for. IMPORTANT WARNING:
Résumé du contenu de la page N° 10
8 Natural Gas Requirements Always check the rating plate to make sure the gas The installation of this appliance must conform with supply you are hooking up to is the gas type the local codes or, in the absence of local codes, to the fireplace is manufactured for. national fuel gas code, ANSI Z223.1a-1998. Installation in Canada must be in accordance with the standard IMPORTANT WARNING: All Cal Flame fireplaces are CAN/CGA-B149.2, Propane Installation Code. Natural manufactured with the
Résumé du contenu de la page N° 11
Installing Your Spa Wrap Fireplace 9 Testing for Leaks Lighting Your Gas Fireplace Perform a leak test at least once each year whether the Read the safety information above before attempting gas supply cylinder has been disconnected or not. In to light your fireplace. addition, anytime the gas cylinder is connected to the This appliance must be lit by hand. When lighting, regulator or any part of the gas system is disconnected follow these instructions exactly. Before lighting, smell or rep
Résumé du contenu de la page N° 12
10 • Never use the fireplace in windy conditions. If Safety Information located in a consistently windy area (oceanfront, mountaintop, etc.) a windbreak will be required. Always keep the appliance area clear and free from combustible materials, gasoline and any other • The area surrounding your new fireplace should flammable vapors and liquids. be kept clean, and free from flammable liquids and other combustible materials such as mops, The log set is sold separately from the fireplace.
Résumé du contenu de la page N° 13
Installing Your Spa Wrap Fireplace 11 • Do not heat any unopened glass or metal container of food on the fireplace. Pressure may build up and cause the container to burst resulting in serious harm or damage to the fireplace. • Do not use charcoal in this fireplace. • Do not block the vents located near the base of your fireplace as gas may build up in case of leak and cause serious damage. • Do not reach over your fireplace or any other surfaces when hot or in use. Most cities and counties
Résumé du contenu de la page N° 14
12 Maintenance and Care Maintaining Your Fireplace Inspect the appliance before initial use. Clean the appliance at least annually and have it inspected by a qualified field service person. Tampering with this appliance is DANGEROUS and voids all warranties. Replace any faulty components only with approved components. For best operation, the burner flames should be steady, not lifting or floating. Periodically remove the logs and examine the burner. If the burner is dirty, clean it with a
Résumé du contenu de la page N° 15
Maintenance and Care 13 Replacement Parts SW-100 Part # Description SW04801641 BAR SW04801642 BENCH SW04801643 FRONT PANEL SW04801644 STEP SW04801645 FIREPLACE PANEL WOOD127-CS BAR STOOL SW-200 Part # Description SW04801735 SIDE BAR SW04801736 CORNER COLUMN SW04801643 FRONT PANEL SW04801644 STEP OPTSW838 LED LIGHT OPTION WOOD127-CS BAR STOOL SW-300 Part # Description SW04801737 BAR SW04801738 PRIVACY PANEL SW04801643 FRONT PANEL SW04801644 STEP SW04801739 PRIVACY PANEL TIER WOOD127-CS BAR STOOL
Résumé du contenu de la page N° 16
Warranty Information See your Cal Enclosures spa wrap dealer for a copy of the applicable warranty, details and any questions you may have regarding the warranty coverage on your spa wrap. Warranty Limitations The Limited Warranty is void if the spa wrap has been subject to negligence, alteration, misuse, abuse, repairs by non-LMS authorized representatives, acts of God and any other cases beyond the control of LMS Examples of common acts invalidating this warranty include but are not limited
