Résumé du contenu de la page N° 1
Image Scanner OPERATING INSTRUCTIONS
Image Scanner
OPERATING INSTRUCTIONS
Read this manual carefully before you use this product and keep it handy for future
Printed in Japan reference.
EE GB G407-6657 For safety, please follow the instructions in this manual.
Résumé du contenu de la page N° 2
Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the in- structions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. Notes: Some illustrations might be slightly different
Résumé du contenu de la page N° 3
Declaration of Conformity “The Product complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC.” Caution Properly shielded and grounded cables and connectors must be used for connections to host computer (and/or peripheral) in order to meet EMC Directive 89/336/EEC emission limits. In accordance with IEC417, this machine uses the following symbols for the main switch: • a means Push ON Push OFF RICOH IMAGE SCANNER IS450S/IS450D/IS450SE/IS450DE Copyr
Résumé du contenu de la page N° 4
Note to users in the United States of America Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications
Résumé du contenu de la page N° 5
Safety Information When using your machine, the following safety precautions should be always be followed Safety During Operation In this manual, the following important symbols are used: WARNING: Ignoring this warning could cause serious injury or even death. CAUTION: Ignoring this caution could cause injury or damage to property. Examples of Indications Symbol means a situation that requires you take care. Do NOT carry out the operation represented by this symbol . This example means “Do not
Résumé du contenu de la page N° 6
Safety Information Warnings • • • • • Only connect the machine to the power source described on the inside front cover of this manual. • • • • • Avoid multi-wiring. • • • • • Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than necessary. These actions could cause an electric shock or fire. • • • • • Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur. • • • • • Make su
Résumé du contenu de la page N° 7
Safety Information CAUTION • Keep the machine away from humidity and dust. A fire or an electric shock might occur. • Do not place the machine on an unstable or tilted surface. If it topples over, it could cause injury. • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. • When the machine will not be used for a long time, unplug the power cord. • • • • • When you pull out the plug from the socket, grip the plug to avoid damaging the cord and
Résumé du contenu de la page N° 8
Important Information Important Information 1. Read all of these instructions and keep them for later reference. 2. Follow all warnings and instructions marked on the machine. 3. Unplug this machine from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. 4. Do not use this machine near water. 5. Do not place this machine on an unstable cart, stand, or table. The machine could fall and suffer serious damage. 6. Slots and openings in the cabinet and the back or bottom
Résumé du contenu de la page N° 9
Important Information 13. Unplug this machine from the wall outlet and refer servicing to qualified service personal under the following conditions; A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the machine. C. If the machine has been exposed to rain or water. D. If the machine does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of othe
Résumé du contenu de la page N° 10
How to Read This Manual How to Read This Manual In this manual, the following symbols are used: Warning This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section. Caution This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or prop
Résumé du contenu de la page N° 11
Table of Contents Table of Contents Safety Information---------------------------------------------------------------------- i Safety During Operation ----------------------------------------------------------- i Examples of Indications------------------------------------------------------------ i Important Information----------------------------------------------------------------iv How to Read This Manual -----------------------------------------------------------vi 1. Introduction Features --
Résumé du contenu de la page N° 12
Table of Contents 3. Setting Originals Originals ---------------------------------------------------------------------------------- 17 Recommended Sizes and Weights of Originals --------------------------17 Difficult to Detect Sizes -----------------------------------------------------------18 Original Sizes and Scanning Area--------------------------------------------19 Setting Originals ----------------------------------------------------------------------- 20 Setting the Original on the Conta
Résumé du contenu de la page N° 13
Table of Contents 6. Appendices Maintenance ---------------------------------------------------------------------------- 33 Cleaning the Scanner ------------------------------------------------------------33 Cleaning the Contact Glass, Slit Glass, White Sheet, and Platen ---------- 34 Cleaning the Feed Roller and Drum ------------------------------------------- 34 Cleaning the White Roller (Duplex Model Only) ---------------------------- 36 Moving the Scanner ------------------------------------
Résumé du contenu de la page N° 14
x
Résumé du contenu de la page N° 15
1. Introduction Features This section describes the features of this scanner. Ultra-fast scanning When scanning A4K (8½” × 11”K), monochrome at 200dpi, this scanner can scan 55 (57) images/minute. When scanning A4K (8½” × 11”K), monochrome at 400dpi, this scanner can scan 31 (32) images/minute. During double-sided scanning, when scanning A4K (8½” × 11”K), monochrome at 200dpi, this scanner can scan 86 (88) images/minute. * When using the Auto Document Feeder (ADF) in binary scanning, these spe
Résumé du contenu de la page N° 16
1. Introduction Space-saving design This scanner is designed in a “wingless” style, in which there are no protruding elements, such as a document tray. This design allows the scanner to be set up next to a wall, and permits office space to be used more effectively. Supports both TWAIN and ISIS The scanner supports both the standard TWAIN and the newer ISIS driver, allowing the scanner to function with a wide range of software. 2
Résumé du contenu de la page N° 17
Guide to the Scanner Guide to the Scanner 2 1 3 4 5 6 10 7 TH2H010E 8 9 1. Auto Document Feeder (ADF) 6. Stopper This is used to automatically feed and scan This stops documents that have been documents. scanned and output by the Auto Docu- ment Feeder (ADF). 2. Document Table 7. Power Switch Documents that are to be scanned by the Auto Document Feeder (ADF) are placed This switch is used to turn the scanner here. power on and off. 3. Auxiliary Table 8. {Clear Modes} Button This table can be ext
Résumé du contenu de la page N° 18
1. Introduction TH2H020E 3 1 2 45 6 789 1. White Sheet 7. Interface for Reverse Side Scan- ning This presses the document down on the contact glass. This is an extension interface for reverse side scanning. (Duplex Model only) 2. Contact Glass 8. DIP Switches This is where the document is placed. These switches are used to set the operat- 3. ADF Cover ing mode. Open this cover to clear paper jams, etc. 9. Reset Switch 4. Power Connector This switch resets the scanner as if the Connect the power
Résumé du contenu de la page N° 19
Guide to the Scanner Understanding the Indicators The scanner has the following indicators: TH2H030E 1: Power On 1 3 2 4 2: Machine Busy 3: Document in Place 4: Error When the scanner is in a normal operating state, the indicators will light in one of the combina- tions shown below. If the indicators light in any other pattern, an error has occurred. Refer to p. 28, “Error Indicators and Solutions.” Description ❍❍❍❍ When the power has just been turned on, or the Reset switch has been pressed (
Résumé du contenu de la page N° 20
1. Introduction 6
