Instruction d'utilisation Honda Power Equipment G400

Résumé du contenu de la page N° 1

Click SAVE to save this manual to your computer. Thank you for choosing Honda.

Résumé du contenu de la page N° 2

Résumé du contenu de la page N° 3

FOR SAFE OPERATION WARNING: * To prevent fire hazards and to provide adequate ventilation, keep the engine at least 3 ft away from buildings and other equipment, during operation. * Do not place flammable objects, such as, gasoline, matches, etc., close to the engine while it is running. * Refuel in a well ventilated area with the engine stopped. Gasoline is flammable and explosive under certain conditions. * Do not smok'e or allow flames or sparks where the engine is refueled o

Résumé du contenu de la page N° 4

Fuel tiller an Check cleaner for dirt j Check cleaner tor rut Check oil level and con- or obstruction of elc- i or obstruction of ele. dition. ~ ments. i ment. , Fuel valve f --I Check battery condition +Be sure the nuid level of each dl is between upper and lower levcl marks. +Add distilled water if necessary. +Check battery @ 2nd Q terminals for proper connection. Air cleaner Throttle lever \ Check reduction gear oil level Fill with "SE" rated SAE 1OW-40 engine oil, if nccos

Résumé du contenu de la page N° 5

\' \

Résumé du contenu de la page N° 6

i First 20 Hrs. 50 Hrs. operating j THROTTLE CONTROL ’ Clean more frequently if operat- A throttle control cable (optional) may be used in CHANGE ENGINE OIL AND REDUCTION GEAR OIL CLEAN AIR CLEANER ELEMENT ing in a dusty area. any one of the four pull directions shown. Use :I either a solid core wire, or a flexible core wire with 4 a return spring and wire end. * Wash “B” and “C” in cleaning ing solvent. After drying, soak in solvent. After drying, refil

Résumé du contenu de la page N° 7

*With electric starter G300 I G400 Cycle, valve arrangement 4 cycle, side valve Displacement cc (cu in) 1 272 (16.6) 1 406 (24.8) Max. output hp/rpm I 7/3,600 10/3,600 Max. torque kg-m (ft-lb) I 1.5 (10.8) 2.3 116.6) ., I Fuel consumption g/hp-h (lb/hp-h) 1 285 (0.62) 1 270 (0.59) D.C. starter motor Starting system PTO shaft rotation Counterclockwise Dry weight kg (Ib) 25 (55.1) 1 33 (72.7) c / ALL INFORMATION, ILLUSTRATIONS, DIREC- TIONS AND SPECIFICATIONS INCLUDED I