Résumé du contenu de la page N° 1
INSTRUCTION MANUAL
Deluxe Laser Line
Generator
Electronic alignment made easy
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
LSLINE
• Taipei • New York • Verona • London • Paris
040504 ed09 JJ
Résumé du contenu de la page N° 2
Contents Full 2 Years Home Use Warranty Warranty 2 Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass Introduction 3 manufacturing techniques, a tool may not live up to our Environmental protection 3 required level of performance and you may need the Scope of product 3 assistance of our service department. Description of symbols 3 This product is warranted for a 2-year period for home Safety rules for laser line generator 4 domesti
Résumé du contenu de la page N° 3
Description of symbols Dear Customer The rating plate on your tool may show symbols. These If you require any help with your product, whether it represent important information about the product or is a Warranty claim, spare part or user information, instructions on its use. please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in Conforms to relevant standards for New Zealand. electromagnetic compatibility. Do not stare into beam. Only turn
Résumé du contenu de la page N° 4
N380 Safety rules for laser line generators Additional safety rules for laser The laser line generator is Class 2 with maximum 1mW and line generator 400nm – 650nm wavelengths. These lasers do not normally The laser line generator emits a laser fan beam, which acts present an optical hazard, although staring at the beam like an invisible surface in the actual three dimensions may cause flash blindness. space. When used indoors, it generates a visible laser line on the surfaces the laser f
Résumé du contenu de la page N° 5
atmospheres, such as in the presence of flammable a qualified repair facility. Repairs performed by liquids, gases, or dust. unqualified personnel could result in serious injury. • D o not push the pin push-button of the aluminium base • Do not disassemble the laser line generator. unless you intend to fix the base on the dry wall or soft Disassembling the unit will void all warranties on the wood like material, it may result injury because of the product. sharp pins. • Do not disassemble
Résumé du contenu de la page N° 6
Know your product Before using the laser line generator, familiarise yourself with all the operating features and safety requirements. Laser line generator 1. Laser switch 2. Laser line rotating dial 3. Level vials 4. Battery cover 5. Magnetic base 6. Front locating groove 7. Rear locating groove Leveling base 8. Vertical adjustment knob 9. Horizontal adjustment knobs 10. Locating pin 11. Mounting thread 15 Pin mounting base 12. Locating pin 13. Pin push buttons 14. Pin protective cover 15. L a
Résumé du contenu de la page N° 7
3. If the floor is level, ensure the surface is made of Changing the laser line generator batteries soft material such as soft wood, then press both pin 1. E nsure that the laser line generator is switched OFF by buttons (13) down into the flat surface and make sure checking that the laser lswitch (1) has been pulled up. it fixes firmly. 2. Turn the battery cover (4) anticlockwise and remove Option 2: Flat surfaces – no mounting base the cap. 1. Place the unit on the floor and check the
Résumé du contenu de la page N° 8
Projection of inclined laser line Projection of laser lines on the floor on the opposite surfaces Once the mounting method has been selected you may commence with the projection of the laser line. Switch ON the laser line generator and adjust the The laser line rotating dial (2) is designed to adjust the rotating dial (2) to the line from horizontal to vertical and all angles in between. required inclined angle on the Switching it on opposite surface. To switch the laser line NOTE. Posi
Résumé du contenu de la page N° 9
5. Switch ON the laser line Maintenance generator. 1. The laser line generator must be handled with care. 6. Adjust the rotating dial 2. A void shock, vibrations and extreme heat. (2) to achieve desired line 3. Always store the tool indoor, switch to OFF position and projection. put it in its protective case. 4. Avoid dust and liquid into the tool, use damp cloth and mild soap to clean the tool. 5. Keep the laser line generator dry and clean. 6. Check the batteries regularly to avoid d
Résumé du contenu de la page N° 10
Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to
