Résumé du contenu de la page N° 1
OPERATION MANUAL
NIGHT VISION SCOPE
NZT1-M2
(Camera Adaptable)
In USA: 2331 Superior Ave. Cleveland, OH 44114
In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5
NEWCON ™ INC. 1996 Printed in Canada
Résumé du contenu de la page N° 2
CONTENTS 1. IMPORTANT INFORMATION 1- Important Information 2- Overview Read prior to activation i) Application and Advantages of NZT1-M2 ii) Warning You have just purchased a complicated electronic iii) Precautions device. To operate it properly, please read this 3- Components 4- Specifications manual carefully. Here are some common 5- Construction precautions that must be noted. 6- Operating Instructions 6.1 Pre-starting procedures 6
Résumé du contenu de la page N° 3
• NEVER disassemble the unit. This device 11. ACCEPTANCE CERTIFICATE contains high voltage, which may be hazardous NIGHT VISION DEVICE to your health! • NEVER expose the opened objective lens of an Serial Number _______________________________ active unit in daylight. (Note: 1st generation Model _NZT-1M2_____________________________ units will still remain active for a few minutes after switching the unit off). At daytime corresponds to technical conditio
Résumé du contenu de la page N° 4
10. Customer Support • ALWAYS keep the objective lenses covered when not in use Should you experience any difficulties with your Newcon Optik product, please consult the enclosed manual. If the problem remains • ALWAYS store in a warm dry place when not unresolved, contact our customer support department at (416) 663- 6963 or Toll free at 1-877-368-6666. in use Our operating hours are 9am-5pm, Monday - Friday, Eastern Standard Time. THANK YOU FOR PURCHASING THE NIGHT VISION
Résumé du contenu de la page N° 5
original purchase, to your NEWCON Dealer. NEWCON will, repair • law enforcement (or at its option replace), the product or part thereof, which, on inspection by NEWCON, is found to be defective in materials or Features workmanship. • The NZT1-M2 telescope is camera adaptable. It is What This Warranty Does Not Cover: attacheable to Pentax screw type cameras or to other NEWCON in not re
Résumé du contenu de la page N° 6
Precautions Unit flashes It is normal for the unit to flash within the first 2 minutes of NZT1-M2 is a sophisticated precision optical instrument activation. If the flashing continues afterwards the following is equipped with electronics. a possible cause: bright environment (even with the cap closed Therefore, it should be handled with due care. !) • Keep your device away from direct sunlight, impacts, dust, Condensation accumulates on the parts. moisture, and sudden changes of temper
Résumé du contenu de la page N° 7
Photography 3. COMPONENTS When using the NZT1-M2 for photography, you are not supposed to obtain the same quality of pictures as taken in the NZT1-M2 is supplied with the following components: daytime. But you will have the possibility to get an image of the object that normally could not be seen in the dark by the NAME QUANTITY naked eye. NZT1-M2 unit 1 Case 1 The user has a wide range of possibilities for experiments in Carrying strap 1 the photography field by selecti
Résumé du contenu de la page N° 8
4. SPECIFICATIONS OF NZT1-M2 Magnification, X 2.4 Field of View, angl.., degrees, not less 15 ° Lens aperture 1.5 Dyoptric correction ± 5 Operating illumination from moon light to star’s light Power supply; Scope 9V AP-7 I/R Illuminator 3V 2AA Battery life, hours 10 Dimensions, mm 100 ×120×260 Weight, kg 1.1 NOTE: As the design is being continuously improved some descriptions may differ from those given above.
Résumé du contenu de la page N° 9
5. CONSTRUCTION 2. On/off Switch 4. Mount Screw 2. Locking Screw 5. Adjustable Angle Locking Ring 3. Lens 1. Body 9. Eye-piece Focusing Ring 4. IR Illuminator 6. Lens 3. Battery 1. Body 5. Lens Focusing Ring House Cover Focusing Ring 7. On/Off Switch 8. Battery Pic. 2 House Cover 6. Tripod Socket Pic. 1 1. Body 2. On/Off Switch 1. Body 3. Battery House Cover 2. Locking Screw 4. Mount Screw 3. Lens 5. Adjustable Angle Locking Ring 4. IR Illuminat
Résumé du contenu de la page N° 10
6. OPERATION INSTRUCTIONS 6.3 Operation at night AT MOON LIGHT WARNING! Take off the lens cover from the lens (3). Turn on the device using switch (7). Turning the eye-piece (9) adjust to NEVER OPERATE YOUR NIGHT VISION DEVICE IN achieve the most clear image on the screen. Then obtain the DAYLIGHT AREAS WITHOUT THE LENS COVER ON! most clear-cut image of the object focusing with ring (5). NEVER DIRECT THE LENS IN THE DIRECTION OF Repeat the steps of focusing if necessa
