Résumé du contenu de la page N° 1
90
60
MEADE
30
Instruction Manual
Model 4500: 4.5" Equatorial Reflecting Telescope
0
AD VANCED PR ODUCTS DIVISION
Meade Instruments Corporation
World’s Leading Manufacturer of Astronomical Telescopes for the Serious Amateur
6001 Oak Canyon, Irvine, California 92618 (949) 451-1450
© 1995
FAX: (949) 451-1460 www.meade.com
Rev. B
4/95
30
60
90
Résumé du contenu de la page N° 2
– 2 – WARNING NEVER ATTEMPT TO OBSERVE THE SUN THROUGH YOUR MEADE TELESCOPE! OBSERVING THE SUN, EVEN FOR THE SHORTEST FRACTION OF A SECOND, WILL CAUSE INSTANT AND IRREVERSIBLE EYE DAMAGE. WHEN OBSERVING DURING THE DAYTIME, DO NOT POINT THE TELESCOPE EVEN CLOSE TO THE SUN. Meade Limited Warranty Every Meade telescope, spotting scope, and binocular is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a period of ONE YEAR from date of original retail
Résumé du contenu de la page N° 3
– 3 – TABLE OF CONTENTS A. Introducing the Meade Model 4500 . . . . . . . . . . . . . . . . . . . . . . . . . .6 1. This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2. Standard Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 B. Unpacking and Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1. Balancing the Telescope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 2. Alignment
Résumé du contenu de la page N° 4
– 4 – Key to Fig. 1 1. Tripod legs 23. Dec. lock 2. Equatorial mount 24. 6 x 30 viewfinder 3. R.A. flexible cable control 25. Telescope front dust cover 4. Dec. flexible cable control 26. Viewfinder bracket thumbscrews 5. Counterweight 27. R.A. setting circle 6. Counterweight shaft 28. Dec. setting circle 7. Counterweight lock 29. Latitude dial 8. Safety washer/thumbscrew 30. Azimuth lock 9. Latitude lock 31. Focus knobs 10. Polar axis 32. Polar shaft acorn cap nut 11. Latitude adjustment knob 3
Résumé du contenu de la page N° 5
90 60 MEADE 30 – 5 – 21 13 23 28 36 10 22 27 32 18 19 9 7 35 17 31 11 33 5 26 25 6 30 24 8 20 12 34 14 16 15 37 2 0 4 29 3 42 39 38 40 1 41 43 Fig. 1: Meade Model 4500: 4.5" Equatorial Reflecting Telescope 30 60 90
Résumé du contenu de la page N° 6
– 6 – A. Introducing the Meade Model 4500 The Model 4500 is an easy-to-operate, high performance 4.5" (114mm) reflecting telescope, intended for astronomical observing. Equipped with a deluxe equatorial mount and aluminum tripod, the telescope’s motion is continuously adjustable for tracking celestial objects. Your telescope comes to you ready for adventure; it will be your companion in a universe of planets, galaxies, and stars. Please note that the Model 4500 is a Newtonian reflecting teles
Résumé du contenu de la page N° 7
– 7 – • Release the latitude lock (9) of the equatorial mount, and tilt the polar axis (10) of the telescope to roughly a 45° angle by turning the latitude adjustment knob (11). With the polar axis thus tilted, firmly re-tighten the latitude lock. • Loosen the lock knobs (15) of the cradle rings (14) and open the cradle rings to position them over the optical tube assembly (12). Turn the lock knobs a few turns to keep the cradle rings closed, but to still allow the cradle rings to slide freely
Résumé du contenu de la page N° 8
n o i t a n i l c e D – 8 – • With the front of the viewfinder already centered in the front bracket ring, look through the viewfinder and loosen or tighten, as appropriate, one or more of the rear viewfinder bracket ring thumbscrews (26) until the viewfinder’s crosshairs are likewise centered on the object previously centered in the main telescope. • Check this alignment on a celestial object, such as a bright star or the Moon, and make any refinements necessary, using the method outlined above
Résumé du contenu de la page N° 9
– 9 – (which passes, for example, through the constellations Orion, Virgo and Aquarius) is specified as having 0°0'0" Declination. The Declination of the star Polaris, located very near the North Celestial Pole, is +89.2°. The celestial equivalent to Earth longitude is called “Right Ascension,” or “R.A.” and is measured in hours, minutes and seconds from an arbitrarily defined “zero” line of R.A. passing through the constellation Pegasus. Right Ascension coordinates range from 0hr0min0sec up
Résumé du contenu de la page N° 10
– 10 – • To center an object in the main telescope, loosen the telescope’s R.A. lock (22) and Dec. lock (23). The telescope can now turn freely on its axes. Use the aligned viewfinder to first sight-in on the object you wish to observe; with the object centered on the viewfinder’s crosshairs, re-tighten the R.A. and Dec. locks. • If you have purchased an assortment of eyepieces (see Section G on Calculating Power and Section J on Optional Accessories for higher and lower powers with the telesco
Résumé du contenu de la page N° 11
– 11 – • The Moon: A veritable treasury of craters, mountain ranges and fault lines. The best contrast for viewing the Moon is during its crescent phase. The contrast during the full Moon phase is low due to the angle of illumination. • Deep-Space: Nebulae, galaxies, multiple star systems, star clusters–hundreds of such objects are visible through the Model 4500. F. Using Setting Circles Setting circles of the polar aligned equatorial mount can facilitate the location of faint celestial objec
Résumé du contenu de la page N° 12
– 12 – H. Maintenance 1. Cleaning As with any quality instrument, lens or mirror surfaces should be cleaned as infrequently as possible. Front surface aluminized mirrors, in particular, should be cleaned only when absolutely necessary. In all cases avoid touching any mirror surface. A little dust on the surface of a mirror or lens causes negligible loss of performance and should not be considered reason to clean the surface. When lens or mirror cleaning does become necessary, use a camel’s h
Résumé du contenu de la page N° 13
– 13 – 3 2 1 2 3 Fig. 5: Diagonal Assembly Fig. 6: Primary Mirror Cell falls directly through the center of the focuser drawtube (17, Fig. 1). These mirror tilt adjustments are made with the diagonal assembly (Fig. 5) and the primary mirror cell (Fig. 6), and will be discussed later. To inspect the view of the mirror collimation, look down the focuser drawtube with the eyepiece removed. The edge of the focuser drawtube (1, Fig. 7), will frame the reflections of the primary mirror with the 3 mirr
Résumé du contenu de la page N° 14
– 14 – b. Spider vane adjustments If the diagonal mirror (1, Fig. 8) is left or right of center within the drawtube (2, Fig. 8), loosen the spider vane adjustment/lock knobs (1, Fig. 5) located on the outside surface of the main tube and slide the entire diagonal assembly up or down the tube along the slotted holes, until the diagonal mirror is centered in the drawtube. If the diagonal mirror (1, Fig. 8) is above or below of center within the drawtube, thread in one of the spider vane adjustment
Résumé du contenu de la page N° 15
– 15 – spot dead center within the out-of-focus star disk (this is the shadow of the secondary mirror), as shown in Fig.11C. (An improperly aligned telescope will reveal elongated circles (Fig. 11A), with an off-center dark shadow.) • If the out-of-focus star disk appears elongated (Fig. 11A), you will need to adjust the primary mirror Phillips-head tilt screws of the primary mirror cell (3, Fig. 6). • To adjust the primary mirror tilt screws (3, Fig. 6), first unscrew several turns the 3 hex-
Résumé du contenu de la page N° 16
AD VANCED PR ODUCTS DIVISION Meade Instruments Corporation World’s Leading Manufacturer of Astronomical Telescopes for the Serious Amateur 6001 Oak Canyon, Irvine, California 92618 (949) 451-1450 FAX: (949) 451-1460 www.meade.com
