Résumé du contenu de la page N° 1
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 1
R
MODEL SL-7 OWNER’S MANUAL
ASSEMBLY AND OPERATING INSTRUCTIONS
140-6007-0
2/96
Résumé du contenu de la page N° 2
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 2 HOW YOUR HOME SECURITY MOTION TEMPLATE ACTIVATED LIGHTING SYSTEM WORKS The Home Security Motion Activated Lighting System is designed to turn on automatically at night when a person enters the detection zone. The light will stay on as long as the motion detector senses motion in the zone. Screw Hole The light will turn off in approximately 90 sec- onds after the person leaves the detection zone or stops moving. During the day, the solar panel converts s
Résumé du contenu de la page N° 3
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 3 ASSEMBLY INSTRUCTIONS HOME SECURITY ACCESSORIES Inspect contents of the box to ensure all parts are included and undamaged. 3 For Visa/MasterCard orders, please call 1-800-468-5252, Monday through Friday, 8:30 AM - 5:00 PM Central Standard Time. 100-0057-0 Replacement Bulb 4 A Phillips screwdriver will be required. 070-6001-0 SL-7 Replacement Battery 112-0010-0 15 ft. Extension Cord 1 PARTS LIST: ONE YEAR LIMITED WARRANTY Home Security Main Housing 1 Fo
Résumé du contenu de la page N° 4
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 4 b. If the weather has been cloudy or overcast during the day, the bat- Step 3 Troubleshooting & tery will not be charged for operation at night. The light must have Slide the two slots in the back of main direct sunlight every day to fully charge the battery. If the light does housing onto the screws. Important Information (con- not receive enough sunlight one day, it will recharge the next sunny tinued) day and resume normal operation. Step 4 Select a
Résumé du contenu de la page N° 5
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 5 It is important that the solar panel is kept free of dirt and debris. A dirty Step 8 Cleaning solar panel will not allow the battery to fully charge. This will shorten the Point the two floodlights in the desired life of the battery and cause the light to malfunction. Clean regularly with a direction. You may want to adjust the dampened cloth or paper towel. floodlights after letting the unit operate for a few nights. Solar security lights can be left o
Résumé du contenu de la page N° 6
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 6 TESTING INSTRUCTIONS Changing Bulb 1. Turn lens counterclockwise and remove. Step 1 Bulb After installing your light, leave the switch in the “OFF” position and 2. Pull bulb straight out and replace with new charge in full, direct sunlight for THREE FULL SUNNY DAYS. bulb. DO NOT PLACE NEW BULB IN BRASS GROMMET HOLES. Lens Step 2 3. Replace the lens by aligning the slots with the After allowing the battery to fully charge, the motion detector can be groo
Résumé du contenu de la page N° 7
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 6 TESTING INSTRUCTIONS Changing Bulb 1. Turn lens counterclockwise and remove. Step 1 Bulb After installing your light, leave the switch in the “OFF” position and 2. Pull bulb straight out and replace with new charge in full, direct sunlight for THREE FULL SUNNY DAYS. bulb. DO NOT PLACE NEW BULB IN BRASS GROMMET HOLES. Lens Step 2 3. Replace the lens by aligning the slots with the After allowing the battery to fully charge, the motion detector can be groo
Résumé du contenu de la page N° 8
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 5 It is important that the solar panel is kept free of dirt and debris. A dirty Step 8 Cleaning solar panel will not allow the battery to fully charge. This will shorten the Point the two floodlights in the desired life of the battery and cause the light to malfunction. Clean regularly with a direction. You may want to adjust the dampened cloth or paper towel. floodlights after letting the unit operate for a few nights. Solar security lights can be left o
Résumé du contenu de la page N° 9
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 4 b. If the weather has been cloudy or overcast during the day, the bat- Step 3 Troubleshooting & tery will not be charged for operation at night. The light must have Slide the two slots in the back of main direct sunlight every day to fully charge the battery. If the light does housing onto the screws. Important Information (con- not receive enough sunlight one day, it will recharge the next sunny tinued) day and resume normal operation. Step 4 Select a
Résumé du contenu de la page N° 10
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 2 HOW YOUR HOME SECURITY MOTION TEMPLATE ACTIVATED LIGHTING SYSTEM WORKS The Home Security Motion Activated Lighting System is designed to turn on automatically at night when a person enters the detection zone. The light will stay on as long as the motion detector senses motion in the zone. Screw Hole The light will turn off in approximately 90 sec- onds after the person leaves the detection zone or stops moving. During the day, the solar panel converts s
Résumé du contenu de la page N° 11
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 1 R MODEL SL-7 OWNER’S MANUAL ASSEMBLY AND OPERATING INSTRUCTIONS 140-6007-0 2/96
Résumé du contenu de la page N° 12
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 3 ASSEMBLY INSTRUCTIONS HOME SECURITY ACCESSORIES Inspect contents of the box to ensure all parts are included and undamaged. 3 For Visa/MasterCard orders, please call 1-800-468-5252, Monday through Friday, 8:30 AM - 5:00 PM Central Standard Time. 100-0057-0 Replacement Bulb 4 A Phillips screwdriver will be required. 070-6001-0 SL-7 Replacement Battery 112-0010-0 15 ft. Extension Cord 1 PARTS LIST: ONE YEAR LIMITED WARRANTY Home Security Main Housing 1 Fo
