Résumé du contenu de la page N° 1
Product Owner's Manual
C842i C846i
Commercial Cycles
C846i
C846i
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions When using the self-powered C846i/C842i cycle, always take Maintain the cycle in good working condition. Refer to the basic precautions, including the following: Maintenance section. Make sure that all fasteners are secure. • Read all instructions before using the cycle. These instructions If you plan to move the unit, obtain help and use a hand truck. are written to protect the unit and ensure the safety of those Do not grasp any
Résumé du contenu de la page N° 4
IMPORTANT SAFETY INSTRUCTIONS Safety Approval Radio Frequency Interference (RFI) When identified with the ETL-c logo, the unit has been tested and Federal Communications Commission, Part 15 conforms to the requirements of CAN/CSA-E-335-1/3-94, Safety The cycle has been tested and found to comply with of Household and Similar Electrical Appliances. the IEC EMC Directive (international electromagnetic compatibility certification) Hazardous Materials and Proper the limits for a Class A digi
Résumé du contenu de la page N° 5
IMPORTANT SAFETY INSTRUCTIONS Canadian Department of European Applications Communications This product conforms to the requirements of the European Council Directive 89/336/EEC, Electromagnetic Compatibility This digital apparatus does not exceed the Class A limits for radio and has been tested to the following standards: noise emissions from digital apparatus set out in the Radio EN55022, Limits & Methods of Measurement of Radio Interference Regulations of the Canadian Department of Inter
Résumé du contenu de la page N° 6
Obtaining Service You should not attempt to service the cycle except for maintenance tasks as described in this manual. For information about product operation or service, see the Precor website at www.precor.com. Should you need more information regarding customer support Serial number label numbers or a list of Precor authorized service centers, visit the Precor website at www.precor.com/contact. For future reference, write the model, serial number, and date of purchase for all your uni
Résumé du contenu de la page N° 7
Table of Contents Important Safety Instructions ...............................................1 Maintenance ............................................................................ 19 Safety Approval ............................................................................... 2 Daily Inspection .............................................................................19 Hazardous Materials and Proper Disposal ............................... 2 Daily Cleaning ...........................
Résumé du contenu de la page N° 8
P R O G R A M C H A N G E Self-Powered Features The power source for the cycle is the user. When a person maintains Note: If the cycle is connected to a CSAFE master device, a slightly a pedal speed above 20 revolutions per minute (RPM), the power different scenario occurs. When ten seconds remain before the that is generated allows the cycle to function properly. cycle shuts off, the workout session ends. RESETTING appears in the lower display while the cycle disconnects from the CSAFE In
Résumé du contenu de la page N° 9
Symptoms of a Low Battery The Optional Power Adapter If no one has used the cycle for an extended period of time, the The display functions differently when the power adapter is battery may need recharging. connected. Because the power adapter provides a constant source of power, the user can stop pedaling during a workout and pause for Symptoms of a low battery include: brief periods without the cycle initiating shutdown procedures. A flickering or erratic display When the pause time lim
Résumé du contenu de la page N° 10
Club Features These next few pages provide information that lets you customize Club Programming Tips the cycle for your club. All these features remain hidden to the club Electrical power must be supplied. A minimum pedal speed (20 patrons and can only be accessed using special key presses. Read revolutions per minute) must be maintained while programming this section if you want to: the cycle. A constant power source is available if you use the Change the display to a different langua
Résumé du contenu de la page N° 11
PROGRAM CHANGE 2. When you are ready, press SELECT (C842i) or ENTER (C846i) Choosing a Language to move to the next program or press RESET to return to the The cycle can display user prompts, text, and user entries in six Precor banner. different languages. When the cycle is shipped from the factory, it is set to display English. To change this setting, perform the following steps: SmartRate CAUTION Above Before beginning any fitness program, you should have a complete physical examinatio
Résumé du contenu de la page N° 12
Setting a Workout Time Limit Setting a Pause Time Limit You can limit how long a user can exercise on the cycle. For example, You can limit how long a user can pause while exercising on the if you set the time limit to 20 minutes, users can only enter a workout cycle by entering a time between 1 and 120 seconds (two minutes). time between 1 and 20 minutes. For example, if you set the pause time limit to 60 seconds, the display automatically resets to the Precor banner if no pedaling or Note:
Résumé du contenu de la page N° 13
Setting a Resistance Range (C846i) Setting Description HIGH provides the full range of resistance available. If an You can set a low, medium or high range of resistance on the C846i upright cycle user chooses the high-end resistance cycle. Within each group, 25 resistance settings are available, but levels, the cycle provides enough resistance to simulate the chosen group affects the overall resistance range. sprinting or hill climbing for users wishing to stand on An example of where you
Résumé du contenu de la page N° 14
P R O G R A M C H A N G E 14.When you are ready, press ENTER to save the program and Changing the Custom Program return to the Precor banner. Important: To change the Custom Program, it is highly Note: If you prefer to exit the program without saving changes to recommended that you use the optional power adapter. Otherwise, the custom profile, press RESET. you will need to maintain a pedal speed above 20 revolutions per minute to keep the cycle from shutting down. Above Cardiovascular He
Résumé du contenu de la page N° 15
Viewing the Software Version and Part Numbers Informational Displays (C842i) UPPER SW scrolls across the display followed by the upper The C842i cycle provides information about its use (odometer and board application software part number and version (for example, hour meter), as well as software version, and error log. In general, 48181-350). you would only access this information if directed to do so by Precor Customer Support. 4. To see the upper boot and lower boot application software
Résumé du contenu de la page N° 16
9. When you no longer need the information in the error log, press Viewing the Error Log QUICKSTART for at least four seconds to delete the error log. The first error log entry scrolls across the display. Up to ten error Continue to maintain light pressure on the key until the message codes can be retrieved. If there are no errors in the log, you will OK appears. When the key is released, NO ERRORS appears in see NO ERRORS displayed. the display, which indicates the error log has been dele
Résumé du contenu de la page N° 17
Viewing the Software Version and Part Numbers Informational Displays (C846i) SOFTWARE VERSION appears for two seconds. UPPER APP The C846i cycle provides information about its use (odometer and then appears followed by the upper board application software hour meter), as well as software version, error log, and serial number. part number and version (for example, 48181-350). In general, you would only access this information if directed to do so by Precor Customer Support. 4. To see the up
Résumé du contenu de la page N° 18
8. Copy the error code information to paper so you can provide it to Viewing the Error Log Customer Support if needed. Be sure to copy it exactly as ERROR LOG appears on the display followed by the first entry shown. in the error log if there are any errors. Up to ten error codes can be retrieved. 9. When you no longer need the information in the error log, press QUICKSTART for at least four seconds to delete the error log. If there are no errors in the log, you will see NO MORE Continue
Résumé du contenu de la page N° 19
The user ID is displayed as five zeros. The left most zero blinks Displaying the Serial Number indicating you starting point. The following table describes key SERIAL NUMBER appears on the display followed by the functions while in CSAFE mode. 13-digit serial number. The serial number is helpful when you contact Customer Support. Keypad Description Note: If no serial number has been entered, then NO SERIAL PROGRAM CHANGE ▲ or ▼ moves the blinking LED from NUMBER appears. Use the serial nu
Résumé du contenu de la page N° 20
A message appears on the display and indicates when the user ID is accepted by the CSAFE master device. Then, the program prompt appears. The user has the option to choose QUICKSTART or select a program and begin exercising. Note: If the user’s pedal speed drops below 20 RPM and the optional power adapter in not installed, a prompt PEDAL FASTER appears. If the pedal speed remains below the 20 RPM threshold for the next twenty seconds, the CSAFE connection is terminated. The word RESETTIN
