Résumé du contenu de la page N° 1
PLEASE THINK BEFORE YOU PRINT
SMART Board™
SBID 6052i Interactive
Display Installation and
User’s Guide
Résumé du contenu de la page N° 2
Product Registration If you register your SMART product, we’ll notify you of new features and software upgrades. Register online at www.smarttech.com/registration. Keep the following information available in case you need to contact SMART Technical Support. Serial Number: ___________________________________________________ Date of Purchase: ___________________________________________________ FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital de
Résumé du contenu de la page N° 3
Important Information Warnings and Cautions Consider the following warnings and cautions when using your interactive display. Electric Shock Warnings WARNINGS To prevent electrical shock hazards that could lead to fire or electrocution, respect the following warnings. • Do not expose this interactive display to rain or moisture. • Do not use this interactive display’s polarized plug with an extension cord receptacle or other outlets unless the prongs can be fully inserted. • Do not open the ca
Résumé du contenu de la page N° 4
ii | – IMPORTANT INFORMATION General Usage Warnings WARNINGS • The lamps in the interactive display contain mercury. Please dispose of them according to local regulations. • If the interactive display glass is broken, do not come in contact with the liquid crystal. Handle with care. • Rest your eyes periodically by focusing on an object at least 5' (1.5 m) away. CAUTIONS • Handle with care when transporting. Save packaging for transporting. • Clean the LCD screen surface with a lint-free, non-
Résumé du contenu de la page N° 5
iii | – IMPORTANT INFORMATION • Do not mount the interactive display face up, face down or upside down for an extended period of time as it could cause permanent damage to the interactive display. • When using a LAN cable, do not connect to a peripheral device with wiring that might have excessive voltage. Power Connectors Use the power cord provided with this display and according to the table below. If a power cord isn't supplied with this equipment, please contact your supplier. Use only
Résumé du contenu de la page N° 6
iv | – IMPORTANT INFORMATION NOTES • For optimum performance, allow 20 minutes for warm-up. • Position the interactive display at a 90° angle to windows and other light sources to minimize glare and reflections. • Adjust the interactive display’s brightness, contrast and sharpness controls to enhance readability.
Résumé du contenu de la page N° 7
Contents Important Information ..............................................................................................i Warnings and Cautions ....................................................................................i 1 Introduction ........................................................................................................... 1 Components of the SMART Board Interactive Display................................... 2 Interactive Display Requirements.....................
Résumé du contenu de la page N° 8
vi | CONTENTS Troubleshooting Wireless Remote Control Issues........................................ 36 Troubleshooting Interactivity Issues ............................................................. 37 6 Maintaining Your Interactive Display................................................................... 43 Cleaning the LCD Screen............................................................................. 43 Maintaining Interactive Display Ventilation .....................................
Résumé du contenu de la page N° 9
Chapter 1 Introduction Your SMART Board™ interactive display includes all the features of SMART’s proprietary DViT™ (Digital Vision Touch) technology on an NEC LCD monitor so that you can select, write and erase on the interactive surface. You can control computer applications, make notes in digital ink, write over videos and graphs, and save all of your work. Topics in this chapter include the following: • Components of the SMART Board Interactive Display – LCD Screen on page 2 – Cameras on
Résumé du contenu de la page N° 10
2 | CHAPTER 1 – INTRODUCTION Components of the SMART Board Interactive Display Physical Location of Components Touch Connection Panel (Behind Interactive Display) LCD Screen Cameras Wireless Remote Control Reflective Sensor Tape Pencil Ledge Terminal Panel Control Panel (Bottom of Interactive Display) (Bottom of Interactive Display) Component Description LCD Screen The screen is 45 3/8" W × 25 3/8" H (115 cm × 64.5 cm), with a 52" (32 cm) diagonal and 16:9 screen format. For information on-
Résumé du contenu de la page N° 11
3 | CHAPTER 1 – INTRODUCTION Cameras The interactive display includes two cameras in the top left and top right corners of the LCD screen. The cameras are under the top cover of the interactive display, and they track finger and pencil positions across the LCD screen. IMPORTANT Do not attach items such as adhesive notes to the screen because they will interfere with the cameras. Reflective Tape The left, right and bottom sides of the LCD screen have a reflective tape that assists the camera
Résumé du contenu de la page N° 12
4 | CHAPTER 1 – INTRODUCTION Wireless Remote The wireless remote control sensor, in the lower-right corner of Control Sensor the bezel of the interactive display, gathers input from the wireless remote control. For information on the wireless remote control sensor, see The Wireless Remote Control Sensor on page 17. IMPORTANT Do not cover or block this area or you could have reduced use of the wireless remote control. Pencil Ledge The interactive display has a pencil ledge to store the batt
Résumé du contenu de la page N° 13
5 | CHAPTER 1 – INTRODUCTION Other Accessories Contact your authorized SMART reseller to order any of the following accessories for your interactive display: SMART Mobile Stand for Interactive Displays Allows mobility and 15 3/4" (40 cm) of height adjustment. Order No. FSSBID 100. Optional Laptop Shelf Features an adjustable tilt angle of up to 35º from horizontal. Shelf telescopes outward. Order No. FSSBID LTS. Active USB Extension Cables If you want to extend the length of the included 16' (
Résumé du contenu de la page N° 14
6 | CHAPTER 1 – INTRODUCTION Interactive Display Requirements Environmental Requirements Environmental Requirement Parameter Operating Temperature 41°F to 95°F (5°C to 35°C) Storage Temperature -40°F to 120°F (-40°C to 49°C) Humidity 5% to 80% relative humidity, non-condensing Water and Fluid Resistance • Intended for indoor use • Don’t pour or spray liquids directly on the electronic components Electrostatic Discharge • Designed to withstand electrostatic shock (ESD) • EN61000-4-2 severity lev
Résumé du contenu de la page N° 15
Chapter 2 Installing the Interactive Display This chapter describes considerations and concerns for trained, professional installers installing the interactive display on a wall-mount or mobile cart. Once the interactive display has been installed, see the next chapter Setting Up the Interactive Display on page 11 for instructions on connecting the computer and interactive display. WARNINGS • Failure to follow the recommended mounting procedures could result in damage to the equipment or in
Résumé du contenu de la page N° 16
8 | CHAPTER 2 – INSTALLING THE INTERACTIVE DISPLAY Selecting the Mounting Location Consider the following when you select a location for your interactive display. • If you want to install the interactive display on a wall, the wall must be strong enough to support the interactive display and the mounting accessories. The interactive display weighs 132 lb. (60 kg). • Do not install the interactive display in locations where a door or gate can hit it. • Do not install the interactive display in
Résumé du contenu de la page N° 17
9 | CHAPTER 2 – INSTALLING THE INTERACTIVE DISPLAY Mounting the Interactive Display Trained, professional installers are required to install the interactive display. The SMART product warranty doesn’t cover damage caused by improper installation, remodelling or natural disasters. Failure to comply with recommendations in this guide could void the warranty. WARNINGS • Prior to mounting the interactive display, inspect the location to ensure that it is strong enough to support the weight of th
Résumé du contenu de la page N° 18
10 | CHAPTER 2 – INSTALLING THE INTERACTIVE DISPLAY • When using mounting accessories, they must comply with the VESA-compatible (FDMlv1) mounting method. • Use M6 screws of the appropriate length. • The recommended fasten force is 470–635 N·cm. Mounting interfaces that comply with the UL1678 standard in North America are recommended. • Refer to the instructions included with the mounting equipment for detailed information. Consider the following when mounting the interactive display on a sta
Résumé du contenu de la page N° 19
Chapter 3 Setting Up the Interactive Display The following chapter includes information on connecting external equipment, connecting the power cord, attaching the cable cover and installing batteries into the pencil and remote control. Topics in this chapter include the following: • Making Power and Computer Connections on page 12 • Installing SMART Software on page 13 • Enabling the Pencil on page 15 • Enabling the Wireless Remote Control on page 16 • Connecting External Equipment with the
Résumé du contenu de la page N° 20
12 | CHAPTER 3 – SETTING UP THE INTERACTIVE DISPLAY Making Power and Computer Connections Touch Connection Panel USB 2.0 Cable Display Touch Connection Power Cord Panel Power Cord Display VGA Cable Internet Connection Computer Power Cord To make power and 1. Connect the supplied VGA cable from your computer or SMART hub’s video computer connections output connection to the terminal pane. For more information, see Connecting External Equipment with the Terminal Panels on page 18. 2. Conne
