Résumé du contenu de la page N° 1
OPERATING MANUAL
SHREDDER
HSM FA 400.2
english
Keep in a safe place for future use! 1.513.999.112 – 0702
Résumé du contenu de la page N° 2
FA 400.2 Contents 1. Proper use, warranty .................................................................................................................3 2. Safety instructions .....................................................................................................................3 3. Overview ...................................................................................................................................4 4. Dimensions ..........................................
Résumé du contenu de la page N° 3
FA 400.2 Danger of injury 1. Proper use, warranty Do not reach into the paper feed The shredder is exclusively designed for destroying opening. paper and cardboard, as well as store cards, credit cards, CD-ROMs and fl oppy disks. Its sturdy drive mechanism is Splinters can cause injury not damaged by paper clips and staples. Before destroying credit cards and store cards, CD-ROMs or fl oppy disks, Our general business conditions are applicable. We pro- you must fi t a splinter guard (strip vid
Résumé du contenu de la page N° 4
FA 400.2 3. Overview 2 8 11 7 12 6 1 3 4 5 9 10 1 Main switch (only solo-version) 2 Keypad 3 Emergency stop button 4 Loading tray 5 Option: extra-wide work table 6 Left cover panel 7 Right cover panel 8 Intake conveyor, paper feed opening 9 Front door 10 Braking swivel castors 11 Oiler on particle cut machines 12 Nameplate 4 0702
Résumé du contenu de la page N° 5
FA 400.2 4. Dimensions 1157 804 1564 HSM FA 400.2 Solo version 1157 804 1644 HSM FA 400.2 Combi version 800 804 1262 2414 Transportation dimensions (without tray) Space requirements for operation and maintenance 0702 5 1646 1208 1208 1646 1646 200 200 1557
Résumé du contenu de la page N° 6
FA 400.2 • The shredder may only be placed in dry rooms on a 5. Transportation, installation hard, level fl oor – not on carpets. The fl oor load on • Place the shredder in its packaging on a smooth, level each roller is approximately 107 kg. surface. • Place the machine in such a way that the power plug • Remove the packaging. is easily accessible and the ventilation slots are free. • Solo machine: • If you need to move the shredder through narrow doors, you can wait until it is at its fi n
Résumé du contenu de la page N° 7
FA 400.2 6. Operating and display elements on the keypad Paper jam or overload Ready for operation Red LED Green LED Door open Waste bag full Red LED Red LED Start button The shredder switches on. The feed belt moves in the intake direction. Stop button The cutting block and feed belt stop. The shredder is in standby mode. Reverse button The cutting block and feed belt run in reverse. Switching on the shredder 7. Start-up, inspecting the safety devices • Pull out the emergency stop button.
Résumé du contenu de la page N° 8
FA 400.2 Inspecting the safety devices Shredding material Check that the safety devices are working properly: • At the start of each shift • After any maintenance or repair work Do not start the machine until you have checked the emergency stop button and the door switch and found them to be in perfect working order. If any defect arises during operation stop the machine immediately and make sure it is corrected. Checking the emergency stop button Place the material to be shredded on the l
Résumé du contenu de la page N° 9
FA 400.2 Stopping the shredder 8. Malfunctions • Press the stop button. Check the following before calling customer service: The cutting block and feed belt stop. • Is the power plug connected? The shredder switches to standby mode. • Is the shredder switched on? • Is the front door closed? Switching off the shredder • Is the waste bag full? • Is there a paper jam in the shredder? • Turn the main switch on the paper shred- • Has the motor been overloaded? der or the baling press to 0. You can
Résumé du contenu de la page N° 10
FA 400.2 Checking the chain tension (twice yearly) 9. Maintenance and care Cleaning the cutting block • Switch off the shredder. Strip cut machines: (1 x daily) • Switch off the shredder. • Pull out the power plug. • Squirt special cutting apparatus oil through • Remove the tray and the left cover panel. the paper feed opening onto the blade roll- ers. The sag of the chain Order no. 1.235.997.401 for a 250 ml bottle should be 4 – 10 mm. Order no. 1.235.997.500 for 5 litre con- tainer • Let th
Résumé du contenu de la page N° 11
FA 400.2 You must check that the feed belt runs Greasing the drive chains and cogs (twice straight: yearly) Switch on the shredder and let it run for 10 minutes. During this time, the feed belt • Switch off the shredder. must run in the middle of the snub roller. If it slips to the left or right edge, you must alter the setting of the snub roller. • Pull out the power plug. • Remove the tray and the cover panels. Checking the feed belt for wear The surface of the feed belt can become worn
Résumé du contenu de la page N° 12
FA 400.2 10. Scope of supply, accessories • Machine on pallet with a wooden frame, strapped with packing tape and packed in foil • 4 waste bags, order no. 1.513.995.000 for 2-chamber system (Solo version) • 1 waste bag, order no. 1.513.995.100 for 1-chamber system (Solo version) • Special cutting block oil For strip cut machines: 250 ml bottle, order no. 1.235.997.401 For cross cut machines: 5 l container with spout, order no. 1.235.997.500 • Operating manual • Accessories: strip curtain, o
Résumé du contenu de la page N° 13
FA 400.2 12. Electric wiring diagrams Legend: =AV: Shredder +S: in switch cabinet +MA: on machine +BF: Keypad Solo 400 V / 50 Hz 0702 13 400 V / Sol o
Résumé du contenu de la page N° 14
FA 400.2 14 0702 400 V / Sol o
Résumé du contenu de la page N° 15
FA 400.2 0702 15 400 V / Sol o
Résumé du contenu de la page N° 16
FA 400.2 Combination 400 V / 50 Hz 16 0702
Résumé du contenu de la page N° 17
FA 400.2 0702 17
Résumé du contenu de la page N° 18
FA 400.2 18 0702
Résumé du contenu de la page N° 19
FA 400.2 0702 19
Résumé du contenu de la page N° 20
FA 400.2 Declaration of Conformity Machinery directive 98 / 37 / EG EMC directive 89 / 336 / EWG Low voltage directive 73 / 23 / EWG The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 115, D-88682 Salem declares herewith, that the paper shredder (Solo machine) HSM FA 400.2 corresponds with the above mentioned EC Machine Directive including all relevant modifi cations. Applied standards and technical specifi cations: • EN 60204-1:1997-12 • EN ISO 12100-1:2003-11 • EN ISO 12100-2:2003-11 • EN 29
