Instruction d'utilisation Troy-Bilt 24A-070F766

Résumé du contenu de la page N° 1

Résumé du contenu de la page N° 2

TABLE OF CONTENTS Content Page Content Page Important Safe Operation Practices 3 Servicing Your Yard Vacuum 12 Assembling Your Yard Vacuum 5 Trouble Shooting 15 Know Your Yard Vacuum 8 Illustrated Parts List 16 Operating Your Yard Vacuum 9 Warranty 20 Maintaining Your Yard Vacuum 11 FINDING MODEL NUMBER This Operator’s Manual is an important part of your new Yard Vacuum. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says. Befo

Résumé du contenu de la page N° 3

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning. WARNING: Engine Exhaust, some of its constituents, and certain vehicle component

Résumé du contenu de la page N° 4

j. To reduce a fire hazard, keep machine free 10. Keep all guards, deflectors and safety devices in of grass, leaves, or other debris build-up. place and operating properly. Clean up oil or fuel spillage and remove any 11. Keep your face and body back and to the side of fuel soaked debris. the chipper chute while feeding material into the k. Allow machine to cool at least 5 minutes machine to avoid accidental kickback injuries. before storing. 12. Never operate this machine without good visib

Résumé du contenu de la page N° 5

Résumé du contenu de la page N° 6

Résumé du contenu de la page N° 7

Résumé du contenu de la page N° 8

Résumé du contenu de la page N° 9

Résumé du contenu de la page N° 10

Résumé du contenu de la page N° 11

SECTION 5: MAINTAINING YOUR YARD VACUUM Customer Responsibilities MAINTENANCE SERVICE SCHEDULE DATES Lubricate Wheels Lubricate Nozzle Levers Lubricate Locking Rod Lubricate Nozzle/Hose Handle Check Chipper Blade Change Oil Check Air Filter Clean Engine Check Spark Plug WARNING: Always stop engine and Maintenance disconnect spark plug wire before Engine cleaning, lubricating or doing any kind of maintenance on your machine. Refer to the separate engine manual for all engine maintenance instru

Résumé du contenu de la page N° 12

Résumé du contenu de la page N° 13

Résumé du contenu de la page N° 14

Résumé du contenu de la page N° 15

SECTION 7: TROUBLESHOOTING Problem Cause Remedy Engine fails to start 1. Spark plug wire disconnected. 1. Connect wire to spark plug. 2. Fuel tank empty or stale fuel. 2. Fill tank with clean, fresh gasoline. 3. Throttle control lever not in correct 3. Move throttle lever to FAST position. starting position. 4. Choke not in CHOKE position. (If 4. Move choke to CHOKE position. Equipped) 5. Engine (if equipped with a primer) 5. Prime engine. not primed properly. 6. Blocked fuel line. 6. Clean fu