Résumé du contenu de la page N° 1
DO NOT
DISCARD
R
2100 MILLENNIUM WOOD STOVE
Advanced Combustion Control (ACC)
Owner’s Manual
Tested and Portland
O-T L
Listed by Oregon USA
C US
Installation and Operation
OMNI-Test Laboratories, Inc.
Model:
21M-ACC
NOTICE
DO NOT DISCARD THIS MANUAL
• R e a d , u n d e r s t a n d a n d • Leave this manual with
• I m p o r t a n t o p e r a t i n g
follow these instructions
a n d m a i n t e n a n c e p a r t y r e s p o n s i b l e f o r
for safe installation and
Résumé du contenu de la page N° 2
R 2100 Millennium Wood Stove (ACC) and Welcome to the Quadra-Fire Family! Hearth & Home T echnologies welcomes you to our tradi- our stoves, inserts and firepla ces. And yet we are old-fash- tion of excellence! In choosin g a Quadra-Fire appliance, ioned when it comes to craftsmanship. Each unit is meticu- you have our assurance of commitment to quality , durabil- lously fabricated and surfaces are hand-finished for lasting ity , and perfo
Résumé du contenu de la page N° 3
R 2100 Millennium Wood Stove (ACC) Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury . • NOTICE: Indicates practices which may cause damage to the fireplace or to property . TABLE OF CONTENTS Sectio
Résumé du contenu de la page N° 4
R 2100 Millennium Wood Stove (ACC) Listing and Code Approvals 1 D. BTU & Efficiency Specifications A. Appliance Certification 2100 Millennium (ACC) Model: EPA Certified: 2.1 grams per hour Laboratory: OMNI T est Laboratories, Inc. Number: 664 EPA Certificate Number Issued: 07-20-2007 and Date: 061-S-70-6 Report No & Date: 78.5% Efficiency: Listed Room Heater, Solid Fuel Type Type: 12,000 to 28,800 BTU Output: Standard: UL1482 and ULC S627-00 and Heating Capacity: 800 to 1,500 sq ft (UM)
Résumé du contenu de la page N° 5
R 2100 Millennium Wood Stove (ACC) Getting Started 2 B. Fire Safety A. Design, Installation & Location Considerations Consideration must be given to: T o provide reasonable fire safety , the following should be given serious consideration: • Safety • Convenience 1. I n s t a l l a t l e a s t o n e s m o k e d e t e c t o r o n e a c h fl o o r o f • T raffic flow y o u r h o m e t o e n s u r e y o u r s a f e t y . T h e y s h o u l d b
Résumé du contenu de la page N° 6
R 2100 Millennium Wood Stove (ACC) C. Negative Pressure T o minimize the af fects of negative air pressure the following Draft is the pressure dif ference needed to vent appliance s must be considered: successfully . Considerations for successful draft include: • Install the outside air kit. Install the intake on the • Preventing negative pressure side of the house towards prevailing winds during the • Location of appliance and chimney heating
Résumé du contenu de la page N° 7
R 2100 Millennium Wood Stove (ACC) F. Tools And Supplies Needed D. Flue Draft Considerations Location of the appliance and chimney will af fect perfor- Before beginning the installation be sure that the following mance. As shown in Figure 6.1 on page 6 the chimney tools and building supplies are available. should: • Be installed through the warm space enclosed by the Reciprocating saw Framing Material building envelope. This helps to produce more draft,
Résumé du contenu de la page N° 8
R 2100 Millennium Wood Stove (ACC) Spark Arrestor Cap H. Typical Stove Systems Fireclay Flue Liner Concrete Cap With Air Space Stove system with masonry chimney consists of: Rafter • Stove Flashing • Chimney Connector (stove pipe) 1" (25mm) Clearance With Firestop • Thimble Ceiling Joist Eave • Masonry Chimney • Hearth Pad Floor Protection Combustible Wall Thimble, 12" (305mm) Of Brick Sheathing Outside Air Rear Vent Outside Air Floor Termination Cap Protect
Résumé du contenu de la page N° 9
R 2100 Millennium Wood Stove (ACC) Dimensions and Clearances 3 23-3/8 in. (594mm) A. Appliance Dimensions C L 8-5/8 in. 11-11/16 in. (219mm) (297mm) NOTE: Flue Collar size is 6 inch (152mm) diameter (ID) 9-1/4 in. (235mm) 12-3/4 in. 13-1/2 in. (342mm) (324mm) 17 in. (432mm) 27-15/16 in. (709mm) Figure 9.1 Front View 26-7/16 in. (671mm) 24-5/16 in. (618mm) 6-11/16 in. (170mm) C L 11-1/2 in. 16 in. (406mm) (292mm) C L 4-1/2 in (108mm) Outside Air Connection 20-3/4 in. (527mm) Fi
Résumé du contenu de la page N° 10
R 2100 Millennium Wood Stove (ACC) B. Clearances to Combustibles (UL and ULC) BACKWALL / SIDEWALL ALCOVE SIDE VIEW NOTE: Clearances may only be reduced by means approved by the regulatory authority having jurisdiction A B G A C D B STOVE TO CEILING CLEARANCE CORNER INSTALLATION E ALCOVE TOP VIEW F C E D F NOTE: Service Space WARNING In order to replace the tube channel assembly a clearance of 17 inches (432mm) is required on the right side of stove Fire Risk. in orde
Résumé du contenu de la page N° 11
R 2100 Millennium Wood Stove (ACC) Installation 4 In Canada, s i m i l a r fl o o r p r o t e c t i o n m u s t b e p r o v i d e d 1 8 A. Hearth Protection Requirements inches (457mm) in front and 8 inches (203mm) from the FLOOR PROTECTION: Floor protector must be non-com- sides and rear of the stove. *See exception. bustible material, extending beneath heater and to the front, *EXCEPTION: N o n - c o m b u s t i b l e fl o o r p r o t e c t i o
Résumé du contenu de la page N° 12
R 2100 Millennium Wood Stove (ACC) B. Outside Air Kit Installation WARNING A source of air (oxygen) is necessary in order for combus- Fire Risk. tion to take place. Whatever combustion air is consumed by the fire must be replaced. Air is replaced via air leakage Asphyxiation Risk. around windows and under doors. In homes that have tightly Do not draw outside combustion air from: sealed doors and windows, an outside air source is needed. •
Résumé du contenu de la page N° 13
R 2100 Millennium Wood Stove (ACC) C. Blower (Optional) 1. Remove the 3 bolts (1/4”-20 Phillips head) on the outer CAUTION skin at the bottom rear of appliance. Shock Risk. 2. Align holes in mounting flange of blower with bolt holes in • Do NOT remove grounding prong from plug. appliance. Blower should be positioned at bottom of rear • Plug directly into properly grounded 3 prong outer skin as shown in Figure 13.1. receptacle. 3. Re-insert and tighten b
Résumé du contenu de la page N° 14
R 2100 Millennium Wood Stove (ACC) Chimney Requirements 5 A. Venting Components B. Chimney Systems Chimney Connector: Prefabricated Metal Chimney It is also known as flue pipe or stove pipe. The chimney • Must be minimum 6 inch (152mm) diameter (ID) high connector joins the stove to the chimney . It must be a 6 inch o temperature chimney listed to UL 103 HT (2100 F) or (152mm) minimum diameter 24 gauge mild steel black or ULC S629M.
Résumé du contenu de la page N° 15
R 2100 Millennium Wood Stove (ACC) Thimble C L Site constructed for masonry chimney installation: ceiling Components 13.5” below ceiling to top of opening • A minimum length of 12 inches [305mm] (longer for Wall or top of opening is a min.of thicker walls) of solid insula ted factory-built chimney 4.5” below min.clearance Minimum18.0” specified by connector mfg. length constructed to UL 103 T ype HT 6 inch (152mm) NFPA 211 1.5 2x2 framing stud inside dia
Résumé du contenu de la page N° 16
R 2100 Millennium Wood Stove (ACC) Solid Pack Chimney with Metal Supports as a C. Installing Chimney Components Thimble (Cont’d) Chimney Connector Single wall connector or stove pipe. Min. Chimney Clearance to This must be at least 24 gaug e mild steel or 26 gauge blue Wall Spacer and Min. Clearance Combustibles - 2 inch (51mm) s t e e l . T h e s e c t i o n s m u s t b e a t t a c h e d t o t h e a p p l i a n c e a n d t o 2 inch (51mm) each other
Résumé du contenu de la page N° 17
R 2100 Millennium Wood Stove (ACC) D. Chimney Termination Requirements NOTE: Follow manufacturer ’ s instructions for clearance, securing • Chimney performance may vary . flashing and terminating the chimney . • T rees, buildings, roof lines and wind conditions af fect performance. • Must have an approved and listed cap • Chimney height may need adjustment if smoking or • Must not be located where it will become plugged by overdraft occurs. snow or other material • Must te
Résumé du contenu de la page N° 18
R 2100 Millennium Wood Stove (ACC) Mobile Home Installation 6 You must use a Quadra-Fire Outside Air Kit Part OAK-ACC and (depending on floor installation, Part Spark Arestor Cap SRV7033-041) for installation in a mobile home. 1. An outside air inlet must be provided for combustion See page 12 for installation information. Storm Collar 2. Appliance must be secured to the mobile home structure Roof Flashing b y b o l t i n g t h e p e d e s t a l t h r o u
Résumé du contenu de la page N° 19
R 2100 Millennium Wood Stove (ACC) Appliance Set-Up 7 B. Adjusting The Blower Speed Control A. Door Handle Assembly T h e b l o w e r s p e e d c o n t r o l f o r t h i s u n i t i s a d j u s t e d a t t h e f a c t o r y , 1. Install washer on door handle shaft. and normally does not require further adjustment. 2. Slide door handle through door . NOTE: When the speed control is turned clockwise, 3. Install second washer(s) as shown in Figure 19.1. it
Résumé du contenu de la page N° 20
R 2100 Millennium Wood Stove (ACC) Operating Instructions 8 A. Over-Firing Your Appliance B. Wood Selection & Storage (Cont’d) wood out - about one hour . It is a waste of energy to burn WARNING unseasoned wood of any kind. D e a d w o o d l y i n g o n t h e f o r e s t fl o o r s h o u l d b e c o n s i d e r e d w e t , Fire Risk and requires full seasoning time. Standing dead wood can Do not over-fire. be considered to be about 2/3 sea
