Résumé du contenu de la page N° 1
TM
ComfortFlame
ComfortFlame
by FMI PRODUCTS, LLC
®
UNVENTED (VENT-FREE) Gas Compa CT ClassiC HEaRTH
DUal BURNER FiREpla CE
oWNER’s opERa TioN aND iNsT alla TioN maNU al
PFS
®
US
Shown with Optional Cabinet Mantel/Hearth Base Accessory
REmoTE-REaDy moDEls CDCFpRB, CDCFNRB, CDCFpRB-1,
CDCFNRB-1
WARNING: If the information in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
— Do not store or use gasoline or other fl
Résumé du contenu de la page N° 2
TaBlE oF CoNTENTs Safety .................................................................. 2 Inspecting Burners............................................. 20 Product Identification ........................................... 4 Cleaning and Maintenance ................................ 20 Optional Remote Control Accessories ................. 4 Wiring Diagram .................................................. 21 Local Codes......................................................... 5 Troubleshooti
Résumé du contenu de la page N° 3
saFETy Do not place clothing or other Continued flammable material on or near the appliance. Never place any DANGER: Carbon monoxide objects on the heater. poisoning may lead to death! Fireplace front and screen be- Carbon Monoxide Poisoning: Early signs come very hot when running of carbon monoxide poisoning resemble the heater. Keep children and adults flu, with headaches, dizziness or nausea. If away from hot surfaces to avoid you have these signs, the fireplace may not be working
Résumé du contenu de la page N° 4
saFETy Continued 5. Do not use this fireplace as a wood-burn- page 6. If fireplace keeps shutting off, see ing fireplace. Use only the logs provided Troubleshooting, page 21. with the fireplace. 11. Do not run fireplace 6. Do not add extra logs or ornaments such as • where flammable liquids or vapors are pine cones, vermiculite or rock wool. Using used or stored. these added items can cause sooting. Do not • under dusty conditions. add lava rock around base. Rock and debris 12. Do not use this
Résumé du contenu de la page N° 5
l oCal CoDEs Install and use fireplace with care. Follow all State of Massachusetts: The installation local codes. In the absence of local codes, must be made by a licensed plumber or use the latest edition of The National Fuel gas fitter in the Commonwealth of Mas- Gas Code ANSI Z223.1/NFPA 54*. sachusetts. *Available from: Sellers of unvented propane or natural American National Standards Institute, Inc. gas-fired supplemental room heaters shall 1430 Broadway provide to each purchaser a
Résumé du contenu de la page N° 6
HooD assEmByl 6. Insert screws as shown in Figure 4. Tighten screws firmly. WARNING: Always have screen in place before operating fireplace. This prevents exces- Shoulder Screw sive temperatures on fireplace Screen surfaces. WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this fireplace may result in prop- erty damage or personal injury. Tools Required: Figure 3 - Removing and Installing Screen • Philli
Résumé du contenu de la page N° 7
aiR FoR ComBUsTioN aND VENTila TioN Continued All spaces in homes fall into one of the three DETERMINING FRESH-AIR FLOW following ventilation classifications: FOR FIREPLACE LOCATION 1. Unusually Tight Construction Determining if You Have a Confined or 2. Unconfined Space Unconfined Space 3. Confined Space Use this work sheet to determine if you have The information on pages 6 through 8 will help a confined or unconfined space. you classify your space and provide adequate Space: Includes th
Résumé du contenu de la page N° 8
aiR FoR ComBUsTioN aND VENTila TioN Continued The space in the previous example is a confined space because the actual Btu/Hr used is more 12" than the maximum Btu/Hr the space can sup- port. You must provide additional fresh air. Your Ventilation Ventilation Grills Grills Into options are as follows: Into Adjoining Room, Adjoining Or Option 2 Room, Remove A. Rework worksheet, adding the space of an Option 1 Door into adjoining room. If the extra space provides Adjoining Room, an uncon
Résumé du contenu de la page N° 9
iNsTalla TioN IMPORTANT: Vent-free fireplaces add mois- NOTICE: This heater is intended ture to the air. Although this is beneficial, for use as supplemental heat. Use installing fireplace in rooms without enough this heater along with your primary ventilation air may cause mildew to form from too much moisture. See Air for Combustion heating system. Do not install this and Ventilation, page 6. heater as your primary heat source. Note: Your fireplace is designed to be used in If you hav
Résumé du contenu de la page N° 10
iNsTalla TioN Continued B. Clearances from the top of the fireplace FIREPLACE CLEARANCES opening to the ceiling should not be less than 36". WARNING: Maintain the C. For mantel clearances, see Figure 11 on minimum clearances shown page 12. in Figure 7. If you can, provide MINIMUM CLEARANCE TO greater clearances from floor, COMBUSTIBLE MATERIALS ceiling and joining wall. Top 36", Left and Right Sides 6", If your fireplace is to be used with an optional Bottom and Rear 0", Front 36" mant
Résumé du contenu de la page N° 11
iNsTalla TioN Continued 2. If installing GA3450TA blower accessory, 3. Install gas piping to fireplace location. This do so at this time. Follow instructions installation includes an approved flexible included with blower accessory. gas line (if allowed by local codes) after the equipment shutoff valve. The flexible Note: If not installing blower accessory, gas line must be the last item installed on you may wish to run electrical wiring to the gas piping. your fireplace for future blowe
Résumé du contenu de la page N° 12
iNsTalla TioN Continued NOTICE: If your installation does WARNING: Do not allow any not meet the minimum clear- combustible/noncombustible ances shown, you must do one materials to overlap the firebox of the following: front facing. • raise the mantel to an accept- able height WARNING: Do not allow • remove the mantel combustible or noncombustible materials to cover any necessary REMOvING UPPER LOUvER openings like louvered slots. To install mantel or blower accessory, you must first
Résumé du contenu de la page N° 13
Installation must include an equipment shutoff iNsTalla TioN valve, union and plugged 1/8" NPT tap. Locate Continued NPT tap within reach for test gauge hook up. CONNECTING TO GAS SUPPLY NPT tap must be upstream from heater (see WARNING: This appliance Figure 14). requires a 45° male flare fitting IMPORTANT: Install equipment shutoff valve in an accessible location. The equipment 5/8"-18 UNF (Unified National shutoff valve is for turning on or shutting off Fine Thread) inlet connection
Résumé du contenu de la page N° 14
iNsTalla TioN Continued We recommend that you install a sediment trap in supply line as shown in Figure 14, page 13. Locate sediment trap where it is within reach for cleaning. Install in piping system between fuel supply and heater. Locate sedi- ment trap where trapped matter is not likely to freeze. A sediment trap traps moisture and contaminants. This keeps them from going into fireplace controls. If sediment trap is not installed or is installed wrong, fireplace may not run properly
Résumé du contenu de la page N° 15
pane/LP supply to equipment shutoff valve iNsTalla TioN for propane/LP (see Figures 18 or 19). Continued Apply noncorrosive leak detection fluid to all joints. Bubbles forming show a leak. CAUTION: Make sure exter- 4. Correct all leaks at once. nal regulator has been installed PRESSURE TESTING FIREPLACE GAS between propane/LP supply and CONNECTIONS fireplace. See guidelines under 1. Open equipment shutoff valve (see Fig- Connecting to Gas Supply, ure 17). page 13. 2. Open main gas valve
Résumé du contenu de la page N° 16
iNsTalla TioN Continued OPTIONAL WALL MOUNTED WARNING: Do not con- THERMOSTAT - GWMT1 nect the thermostat to a power source. Electrical shock and/or WARNING: Read and fol- a fire hazard will occur. low installation instructions. Installation should be done by 6. Connect one bare wire end to each termi- a qualified installer familiar with nal (“W” and “R”) of the thermostat base low-voltage wiring procedures. (see Figure 24). 7. Install base onto wall with provided screws. WARNING: Do
Résumé du contenu de la page N° 17
iNsTalla TioN Continued 8. Move temperature adjustment back and INSTALLING LOG SET AND SCREEN forth to insure the bimetal is free from re- 1. Remove log packaging material and strictions. discard packaging. Gently place log over 9. Replace cover onto base. (Upon installa- burner (see Figure 25). Do not allow log to tion, thermostat must be allowed to sta- contact flame. If flame contacts log, soot bilize at room temperature for a minimum will be created. of 30 minutes for proper operation)
Résumé du contenu de la page N° 18
opERa TioN NOTICE: During initial operation FOR YOUR SAFETY of new fireplace, burning logs READ BEFORE LIGHTING will give off a paper-burning WARNING: If you do not fol- smell. Open window to vent low these instructions exactly, smell. Operate fireplace on HI a fire or explosion may result position to burn off odor. This causing property damage, per- will only last a few hours. sonal injury or loss of life. A. This appliance has a pilot which must WARNING: Burner will come be lighte
Résumé du contenu de la page N° 19
opERa TioN Continued • If control knob does not pop out when TO TURN OFF GAS released, contact a qualified service TO APPLIANCE person or gas supplier for repairs. Shutting Off Fireplace Note: If pilot goes out, repeat steps 4 1. Turn control knob clockwise to the through 8. OFF position. 8. Slightly push in and turn control knob coun- 2. If Using Optional Hand-Held Remote: terclockwise to the ON position. Set selector switch in the OFF position to 9. Set flame adjustment knob to any l
Résumé du contenu de la page N° 20
iNspECTiNG B URNERs Check pilot flame pattern and burner flame patterns often. PILOT FLAME PATTERN Figure 29 shows a correct pilot flame pattern. Figure 30 shows an incorrect pilot flame pat- Figure 31 - Correct Burner Flame Pattern tern. The incorrect pilot flame is not touching the thermocouple. This will cause the thermo- couple to cool. When the thermocouple cools, the fireplace will shut down. If pilot flame pattern is incorrect, as shown in Figure 30 • turn fireplace off (see To Turn
