Instruction d'utilisation Compaq 6310

Résumé du contenu de la page N° 1

HP EMEA Wireless Solutions



Nokia 6310/6310i and
IPAQ 3870/3970
Bluetooth configuration
guide




Version 1.2, July 2002

Résumé du contenu de la page N° 2

Hewlett Packard EMEA Wireless How to connect the Nokia 6310/6310i and the H3870/3970/BT wireless pack to GPRS Background: This document will describe how to connect a Nokia 6310 with the new iPAQ 3870/3970 or any other iPAQ with a Bluetooth wireless pack. With this configuration you will be able to connect the Internet using BT as carrier between the devices and GPRS as connection to Internet. This setup can easil

Résumé du contenu de la page N° 3

Hewlett Packard EMEA Wireless 2. If you are using the Bluetooth wireless pack install”End user upgrade 1” (EUU 1). Download from http://www.compaq.com/support/files/handhelds/us/download/13464.html. To determine whether the upgrade is installed check ActiveSync. If you have a server tab under options the upgrade is installed continue with step 4. 3. If you have a 3870 with ROM version 2.15 upgrade to 2.20 by

Résumé du contenu de la page N° 4

Hewlett Packard EMEA Wireless 5. On the Nokia 6310 assign a name under Menu\Bluetooth\Bluetooth settings\My phones name. Make sure that the Bluetooth is turned on under Menu\Bluetooth. 6. Still on the Nokia 6310 make sure that the “visibility parameter” is on under Menu\Bluetooth\Bluetooth settings. It should be set to “Shown to all”. This is only necessary during the pairing process. (Be sure to set it back

Résumé du contenu de la page N° 5

Hewlett Packard EMEA Wireless 8. Click on the icon corresponding to your device name in the BT manager. All the available services will be presented under the actions menu. Choose create bond with this device. On the iPAQ enter a Pin code for example a single “1” without pressing OK. 9. This step needs to be followed exactly and be done in maximum 5 seconds. On the iPAQ press OK. When you get the “pair wit

Résumé du contenu de la page N° 6

Hewlett Packard EMEA Wireless NOTE: If you get this message you need to NOTE: When you get this on your iPAQ the start over from step 8 Bond was successful NOTE: This screen indicates a successful NOTE: If you get this after the “paired with pairing with the iPAQ. XXXX” the connection was still successful. 10. To turn off the need of pressing accept on the 6310 on each connection change menu\b

Résumé du contenu de la page N° 7

Hewlett Packard EMEA Wireless 11. On the iPAQ, open the actions menu and choose “Set as Bluetooth Dialup Modem”. Click OK on the upper right corner then go to next step. 12. On the iPAQ go to start setting\connections\connections. Choose dialing locations and then dialing patterns. Set G as dialing pattern on all three areas. Press OK and then connections. Press on the drop down list and choose “Internet sett

Résumé du contenu de la page N° 8

Hewlett Packard EMEA Wireless 14. Start Pocket Internet Explorer and enter a web URL in the top field and press the green arrow. 15. Leave the username, password and domain fields empty. Check “save password” then press Ok. You only have to do this once. On the Nokia 6310 you will get “Connect to XXXX” press yes. After a second you will get a “creating GPRS session” message. When the message “connected” appe