Instruction d'utilisation Soleus Air HM2-15R-32

Résumé du contenu de la page N° 1

Flat Panel Micathermic
Heater with
Remote Control


OWNER’S MANUAL
Model # HM2-15R-32



PLEASE SAVE THESE INSTRUCTIONS
WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE.

Résumé du contenu de la page N° 2

FLAT PANEL MICATHERMIC HEATER w/ REMOTE CONTROL Thank you for choosing a Soleus Air heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purch

Résumé du contenu de la page N° 3

NOT use on soft surfaces, like a bed, where openings may become blocked. 12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and open flames. 13. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No. 16 AWG minimum size and rated not les

Résumé du contenu de la page N° 4

SPECIFICATIONS Voltage Rating 120 V (60Hz) Power Consumption 750/1500W Unit Size 18 in. (W) x 8 5/8 in. (D) x 26 in. (H) Unit Weight 11 lbs PRODUCT DIAGRAM Carrying Handle Control Panel Wheel Base Wheel Remote Control 4

Résumé du contenu de la page N° 5

ASSEMBLY 1. Remove the heater body, two wheelbases, wheels, screws, and washers from the box. Remove the packaging materials and keep for future storage. 2. Attach the wheels to each wheelbase with the supplied wheel screws, small black spring- washers, and small grey washers. Wheel Screw Wheel Small Black Spring-Washer Small Grey Washer Wheel Base 3. Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down. 4. Atta

Résumé du contenu de la page N° 6

OPERATING INSTRUCTIONS Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate heater in upright position with caster wheels attached. Temperature Display Receiver for Remote Control Timer Button Temperature Buttons Indication Lights Mode Select Button On/Off Button 1. Turn the heater on by pressing the On/Off button on the control panel or the supplied remote control. 2

Résumé du contenu de la page N° 7

6. The indication lights on the control panel communicate how the product is operating. The POWER light will turn-on when the unit is operating. The TIMER light will turn on when the timer has been activated. When choosing between High, Low, and ECO modes the corresponding lights will turn on according to the mode that has been selected. 7. Unplug the heater when not in use. NOTE: For safety, if the heater’s internal temperature rises above a certain point, the heater is designed to a

Résumé du contenu de la page N° 8

MAINTENANCE 1. Unplug the unit and let it cool completely. 2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 4. DO NOT immerse the heater in wate

Résumé du contenu de la page N° 9

WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air HM2-15R-32 to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of charge within a reasonable time after the unit