Résumé du contenu de la page N° 1
READ AND SAVE THESE INSTRUCTIONS
™
MONACO
60” Ceiling Fan
Owner's Manual
Model Number
CF830GES00
Golden Espresso
Net Weight: 35.3 Lbs.
Part No. F40BP74050000 Form No. BP7405
U.L. Model No.: CF830
Résumé du contenu de la page N° 2
WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference 2. Before attempting installation, servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service
Résumé du contenu de la page N° 3
This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Tools Needed for Assembly Installed Wire Length Wire Size A.W.G. One stepladder One wire stripper Up to 50 ft. 14 One Phillips head screwdriver 50-100 ft. 12 MATERIALS ! WARNING Wiring outlet box and box connectors must be of type If you feel you do not have enough wiring knowledge or required by the local code. The minimum wire would experience, have your fan installed by a
Résumé du contenu de la page N° 4
IMPORTANT: Your ceiling fan is supplied with an Ceiling Fan Assembly Fan/Light Dual Slide Wall Control (transmitter). This allows you to regulate your ceiling fan speed, Procedures airflow direction, and light intensity. Optional Emerson Electric Remote and Wall Control may IMPORTANT: Remove the five motor retainers also be used, see store or catalog. from the motor hub and discard the retainers and retainer screws before installation of flange/blade IMPORTANT: Your ceiling fan will not functio
Résumé du contenu de la page N° 5
1/4-20 x 12mm OVAL HEAD BLADE SCREW (2 per flange) BLADE FLANGE SWITCH HOUSING SWITCH HOUSING ADAPTER INTERLOCKING FEATURE Figure 3 ! WARNING SWITCH HOUSING SWITCH HOUSING COLOR CODED ADAPTER COLOR CONNECTOR CODED CONNECTOR To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, Figure 5 balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades. CAUTION: Before installing and tightening the screw
Résumé du contenu de la page N° 6
11. Obtain the 10” hanger ball/downrod assembly and MOTOR remove the hanger ball by loosening the setscrew COUPLING in the hanger ball until the ball falls freely down SETSCREW (2) HAIRPIN the downrod (Figure 7). Remove the pin from the CLEVIS PIN CLIP downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in Step 22. Discard the 10” downrod if using the 4.5” downrod. DOWNROD CLEVIS PIN PIN HAIRPIN CLEVIS CLIP PIN HANGER BALL UPPER SETSCREW SETSCREW (2) DOWNROD S
Résumé du contenu de la page N° 7
17. 10” Downrod Installation: Remove the grommet 22. Reinstall the hanger ball on the downrod from the coupling cover, then slide the coupling as follows. Route the motor leads through the cover on the downrod until it rests on the motor hanger ball and slide the hanger ball over the housing. Be sure that the coupling cover is downrod (Figure 12). Install the pin through the oriented correctly (Figure 10). holes at the top of the downrod and slide the hanger ball up the downrod, aligning the bal
Résumé du contenu de la page N° 8
OUTLET How to Hang BOX Your Ceiling Fan ! WARNING TWO SCREWS SUPPLIED WITH The fan must be hung with at least 7' of clearance HANGER OUTLET BOX BRACKET from floor to blades (Figure 14). Do NOT hang this fan on an 8’ ceiling when using the 10” downrod. TAB CEILING Figure 15 2. Carefully lift the fan and seat the hanger ball/downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 16). Be sure the groove in the ball is lined up with tab on the hanger bracket (Figur
Résumé du contenu de la page N° 9
How to Wire Your Ceiling Fan If you feel that you do not have enough electrical NOTE: See next section “How to Wire Your wiring knowledge or experience, have your fan Ceiling Fan - Dual Slide Wall Control” and Figure installed by a licensed electrician. 22 to complete wiring connections for your fan. ! WARNING ! WARNING Check to see that all connections are tight, including Turning off wall switch is not sufficient. To avoid ground, and that no bare wire is visible at the wire possible electric
Résumé du contenu de la page N° 10
EMERSON 4 3 2 1 EMERSON 4 3 2 1 • Blue and yellow wires from fan to blue wire from How to Wire Your Ceiling Fan fan/light control. - Dual Slide Wall Control • Black/white wire from fan/light control to black wire from the 120V AC supply source. NOTE: Installation of this control requires that a three-conductor cable with ground wire be run BLUE LIGHT SWITCH LEAD between the control wall box and the ceiling fan YELLOW LIGHT TO HOT outlet. SWITCH LEAD BLACK/WHITE ! WARNING Turning off wall switch
Résumé du contenu de la page N° 11
NOTE: Refer to Schematic “A” or “B”, depending upon the location of your 120V AC supply source (Figure 22). NOTE: This wiring configuration will control accent/light and accessory downlight together. For other possible wiring/switch combinations to control accent light and downlight, consult a licensed electrician or see other Emerson accessory control. Schematic “A” CONNECTIONS REQUIRED WHEN SUPPLY VOLTAGE IS FED INTO CEILING OUTLET BOX. CEILING OUTLET BOX BLACK 120V AC WHITE SUPPLY GROUND SOUR
Résumé du contenu de la page N° 12
5. All fans are shipped from the factory with the Operating Your Ceiling Fan reversing switch positioned to circulate air downward. If airflow is desired in opposite with the Wall Control direction, turn your fan OFF and wait for the blades to stop turning, then slide the reversing switch to IMPORTANT the opposite position, and turn fan on again Fan installation must be completed, including the (Figure 24). installation of the fan blades, before testing of the 6. The fan blades will turn in the
Résumé du contenu de la page N° 13
Accessories Maintenance 1. Ceiling Fan/Light Controls (see store or catalog). IMPORTANT CARE INSTRUCTIONS for your Ceiling Fan 2. Ceiling Fan Light Kits (see store or catalog). Periodic cleaning of your new ceiling fan is the only 3. Downrod Extension Kits (see store or catalog). maintenance that is needed. When cleaning, use only a soft brush or lint free cloth ! WARNING to avoid scratching the finish. Abrasive cleaning agents are not required and should The use of any other control not specifi
Résumé du contenu de la page N° 14
Repair Parts 1 2 7 6 3 14 15 13 26 17 4 3 8 2 1 9 18 16 5 4 11 19 10 22 21 12 20 23 24 25 14 U.L. Model No.: CF830
Résumé du contenu de la page N° 15
Repair Parts Listing Model No. Key No. Description CF830GES00 * Hanger Pack, Consisting of: 761655-87 1 Hanger Bracket (1) — 2 Hanger Ball (1) — 3 Downrod - 10” (1) — * Parts Bag Containing: 763973 4 Pin, Clevis (1) — 5 Clip, Hairpin (1) — 6 Connector Wire Nut, 12 GA (5) — 7 Threaded Stud, #8-32 x 1-1/4” (2) — 8 Lockwasher, External Tooth #8 (2) — 9 Knurled Knob, #8-32 (2) — 10 Screw, Oval Head CR 1/4-20 x 12mm (11) — 11 Screw, Oval Head CR #10-32 x 22mm (21) — 12 Screw, Pan Head CR #8-32 x 10mm
Résumé du contenu de la page N° 16
LIMITED WARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson Electric Co. ceiling fan against all defects in workmanship and materials. You must be the original purchaser or user of the product to be covered. What The Period Of Coverage Is: As it applies to the motor, this warranty will last for a lifetime from the date you purchased your ceiling fan. All other components and accessories are covered by this warranty for one ye
