Instruction d'utilisation Soleus Air Reflective Tower Heater MS-14R

Résumé du contenu de la page N° 1

MS-14R Reflective Tower Heater
Operating Instructions
3061233
Model No. MS-14R
© 2007 Soleus Air International

Résumé du contenu de la page N° 2

Thank you for choosing a Soleus Air personal heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air personal heater. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial n

Résumé du contenu de la page N° 3

12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammble liquids are used or stored. Keep unit away from heated surfaces and open flames. 13. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No16.AWG minimum size and rated not less than 1500W. 14. To avoid fire or shock hazard, plug the unit directl

Résumé du contenu de la page N° 4

SAFETY FEATURES Tip-Over Safety Switch This heater is equipped with a tip-over safety switch located underneath the base of the heater. This switch must be pressed inward for the heater to function properly. Some soft surfaces such as carpet may not be able to fully press in this switch. For some soft surfaces, a hard flat object will need to be placed underneath the heater for it to function properly. PLEASE DO NOT TAPE OR GLUE THIS SWITCH. BOTTOM OF THE HEATER SAFETY SWITCH

Résumé du contenu de la page N° 5

ASSEMBLY Remove the heater body, two base pieces, and fastening screw from the box. Remove the packaging materials and keep for future storage. Lay the heater body on a level surface. To assemble the base, insert the 6 round pegs of base B into the round holes of base A until you hear a clicking noise. (Figure 1) Pull the power cord through the hole at the center of the base, and align the base with the bottom of the heater. The power cord should fit through the slot in the base. Scr

Résumé du contenu de la page N° 6

OPERATING INSTRUCTIONS 1. Place the heater on a firm, level surface and plug into a grounded 115V 60Hz power outlet. 2. Press the ON/OFF button once to turn on the heater. The POWER indicator light will turn on. To shut the heater off, press the ON/OFF button once more. 3. Press the H/L button to select the desired heat setting. The corresponding indicator light will turn on. LOW: heating up to 450W, HIGH: heating up to 900W 4. To operate the timer, press the TIMER button repeatedly to s

Résumé du contenu de la page N° 7

MAINTENANCE 1. Unplug the unit and let it cool completely. 2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 4. DO NOT immerse the heater in wate

Résumé du contenu de la page N° 8

WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air heater to be free of defects in material and workman- ship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original re- tail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of charge within a reasonable time after the unit is