Résumé du contenu de la page N° 1
Operating Manual
TM
UtilityPRO Series
Touchscreen Programmable Demand Control Thermostat
85-3126
Résumé du contenu de la page N° 2
BE CAREFUL! Never use sharp instruments, such as a pencil or pen, to press touchscreen keys. To prevent damage to the thermostat, always press keys with your fingertip. This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Need Help? For assistance or warranty information please call your local Utility at the number found on the front of the thermostat. Read and save
Résumé du contenu de la page N° 3
Battery Replacement Battery Cover The UtilityPRO has a coin cell Assembly battery that retains the time and date during a power failure. Under normal circumstances the coin cell should last five years. Coin cell Should the time and date need battery tray to be reset after a power failure, this is an indication that the coin cell needs to be replaced. You should replace battery every five years, or before leaving home for Insert the coin cell battery in the coin cell battery an exte
Résumé du contenu de la page N° 4
FCC Part 15 Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This
Résumé du contenu de la page N° 5
TM UtilityPRO Series Table of contents Special Features ......................................17 About your new thermostat Screen Lock .............................................18 Thermostat Features ..................................2 Screen Cleaning .......................................19 Getting Started Advanced Functions ...........................20-23 Quick Reference to Controls .....................3 Troubleshooting ..................................24-25 Quick Reference to Status Di
Résumé du contenu de la page N° 6
Operating Manual TM UtilityPro Features Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermostat. It has been designed to give you many years of reliable service and touchscreen climate control. Features • Provides Utility information messages. • Provides Utility billing information. • 5/1/1 and 5/2-day program schedules maximize comfort and economy. • Demand response thermostat programmed to aid you in your savings. ® • EnergyStar compliant to greatly reduce yo
Résumé du contenu de la page N° 7
TM UtilityPRO Series Quick Reference to Controls Press day(s) to set program schedule (see page 11) Press to view messages Displays the current tier rate Press to adjust temperature settings Press to select fan operation Press to select system type Press to view the SUN subscribed service Press to set program messages schedule Press to lock keypad for 30 Press to override Press to set clock seconds to clean screen program schedule 3
Résumé du contenu de la page N° 8
Operating Manual Quick Reference to Status Display Current inside temperature Temperature setting TIER VIEW MEDIUM Fan setting Inside Set To Program schedule ON FAN (does not display 70 AUTO 75 when off) Following System setting SUN SYSTEM Schedule AM Recovery 8:10 HEAT Adaptive Intelligent Recovery in effect SCHED HOLD CLOCK SCREEN USAGE (see page 17) Current time Other display messages: • Cool ON: Cooling system is activated Current day of week • Heat ON: Heating system is activated • Aux
Résumé du contenu de la page N° 9
TM UtilityPRO Series Demand Control This is an energy saving device. At times, thermostat operation may be temporarily adjusted by a small amount as outlined in your energy provider’s associated program literature. This is normal operation and is part of the program for which you have enrolled. Thank you for your participation. 5
Résumé du contenu de la page N° 10
Operating Manual ® Ut Utilit ility y Us Proages Fea tures Usage is a service provided by the utility provider. Depending on the various services provided by the utility provider, Usage may contain vital information for your use. It may display your electricity bill, water consumption bill, gas bill, and so on. Usage also has a feature wherein you can compare your present consumption against your last year’s consumption for the same time period. For example, it displays your current electric
Résumé du contenu de la page N° 11
TM UtilityPRO Series Ge Vietw ti Messages ng Started Press on your screen. Good Morning! The message icon blinks when you receive a new message. The Message screen appears. Use the arrow buttons to view the messages. There can be a maximum of five messages. The message scrolls automatically if it has more than 21 characters. In case there are no messages, the EXIT message icon does not appear. Press Delete to delete the displayed message. Press Exit to go to the main screen. 7 7
Résumé du contenu de la page N° 12
Operating Manual TM Ut Usilit age and Billing yPro Features Press on your screen. ELECTRICITY BILL The Usage screen appears. Navigate using the arrow buttons to view the billing consumption of water, gas, electricity, and so on*. $ $ 52 61 In case there are no utility messages, the utility message icon does not appear. EXIT Press Exit to go to the main screen. * subject to Contract Agreement with the Utility Provider. 8 8
Résumé du contenu de la page N° 13
TM UtilityPRO Series ® Ge Ut Failit n tt S iy ne P gtr Sta to in Fe gr sta ed tures Press FAN to select fan operation, then press DONE. Inside Set To • ON: Fan is always on. FAN 70 70 AUTO • Auto: Fan runs only when the heating or Following SYSTEM WED cooling system is ON. Schedule AM HEAT 6:01 • Circ: Fan runs randomly, about 35% of the time, not counting any run time with the SCHED HOLD CLOCK SCREEN USAGE heating or cooling system. You can press FAN to override the fan settings you’ve pro
Résumé du contenu de la page N° 14
Operating Manual System Settings Press the SYSTEM button to select one of the following, then press DONE. • Heat: Thermostat controls only the heating system. Inside Set To FAN • Cool: Thermostat controls only the cooling system. 70 AUTO 70 • Off: Heating and cooling systems are SYSTEM Following OFF. WED Schedule AM HEAT • Auto: Thermostat automatically selects 6:01 heating or cooling depending on the indoor temperature. SCHED HOLD CLOCK SCREEN USAGE • Em Heat (only for heat pumps with au
Résumé du contenu de la page N° 15
TM UtilityPRO Series Schedule Settings Press SCHED 1. Press SCHED, then EDIT. SCHED HOLD CLOCK SCREEN USAGE 2. Press day buttons to select day(s). There are three groups (MON-FRI), (SAT), and (SUN). 3. Press or to set Wake time for selected Press EDIT day(s). 4. Press or to set Heat and Cool DONE EDIT WAKE LEAVE RETURN SLEEP CANCEL temperature for this time period. Select day(s) Set heat/cool levels 5. Press other time periods (LEAVE, RETURN, SLEEP) to set time and temperatures for
Résumé du contenu de la page N° 16
Operating Manual Program Schedule Override (Temporary) Adjust temperature Press or to immediately adjust the temperature. This temporarily overrides the temperature setting for the current time period. The new temperature is maintained only until Inside the next programmed time period begins FAN Set To (see page 15). For example, if you want to 73 70 AUTO turn up the heat early in the morning, it will Heat On automatically be lowered later, when you leave SYSTEM FRI for the day. AM HE
Résumé du contenu de la page N° 17
TM UtilityPRO Series Program Schedule Override (Permanent) Adjust temperature Press HOLD to permanently adjust the temperature. This turns off the program schedule. Whatever temperature you set is maintained Inside 24 hours a day until you manually change it or Set To FAN press CANCEL (or SCHED) to cancel “Hold” and 73 70 AUTO Heat On resume the program schedule. Permanent Hold SYSTEM FRI AM HEAT 8:00 HOLD SCHED CLOCK SCREEN USAGE CANCEL Press CANCEL (or SCHED) to Press HOLD resume progra
Résumé du contenu de la page N° 18
Operating Manual Clock Settings Press CLOCK To set the current time display, press CLOCK, then press or to adjust the time. Press and hold or to advance the time more WED AM quickly. 6:01 Press DONE to save & exit (or press CANCEL to SCHED HOLD CLOCK SCREEN MORE exit without changing the time). Adjust time, then press DONE Note: The real-time clock should never require adjustment since it automatically updates for daylight savings time, and stores all date/time WED information. AM
Résumé du contenu de la page N° 19
TM UtilityPRO Series Save Money by Setting Program Schedules It is easy to program your system for maximum energy savings. You can program four time periods each day, with different settings for weekdays and weekends. WAKE Set to the time you awaken and the temperature you want 6:00 am during the morning, until you leave for the day. ° 70 LEAVE Set to the time you leave home and the temperature you 8:00 am want while you are away (usually an energy-saving level). ° 62 RETURN Set to the time y
Résumé du contenu de la page N° 20
Operating Manual ® EnergyStar Settings for Maximum Cost Savings ® This thermostat is pre-set to use EnergyStar program settings. We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. Heat (Mon-Fri) Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun) Wake ° ° ° ° (6:00 am) 70 78 70 78 Leave ° ° ° ° (8:00 am) 62 85 62 85 Return ° ° ° ° (6:00 pm) 70 70 78 78 Sleep ° ° ° ° (10:00 pm) 62 82 62 82 16
