Instruction d'utilisation Whynter KS-1100

Résumé du contenu de la page N° 1

WHYNTER Digital Wall Kitchen Scale

MODEL: KS-1100

Please read this instruction booklet completely before operating.

SPECIFICATIONS
Equipped with a high precision strain gauge sensor system
Capacity: 2kgx1g
Auto off & Manual off
Tare function
Over load / Low battery indicator
Electronic clock, countdown timer with alarm
POWER SUPPLY
1 x 3V CR2032 lithium battery (included)
When the LCD indicates “ , please open the battery cover at the bottom of the unit and
replace t

Résumé du contenu de la page N° 2

plates. STEP 4: Pull the insulating tape out of the battery cover of the scale. STEP 5: Insert the scale to the fixture plates and press downwards then push to the right. OPERATION STEP 1: Pull down the glass platform of the scale. STEP 2: Press the “ON/TARE” button and the scale will display “HELO”, and then zero. The scale is now ready for weighing. STEP 3: Put the food / ingredient on the glass platform, the weight will appear on the display

Résumé du contenu de la page N° 3

TARE FUNCTION STEP 1: In the weighing mode, put the container on the glass platform, the display will show the weight of container. STEP 2: Press the “ON/TARE” button again, the display will show zero. Put the food/ ingredient into the container, the weight of the food/ ingredient will appear on the display. TIME SETTING Press the “MODE” button for a few seconds to turn on the time setting function. Minute will flash on the display. Press the “UNIT

Résumé du contenu de la page N° 4

COUNTDOWN TIMER SETTING Press the “MODE” button to change the scale to countdown timer mode. Press the “MODE” button and the second will flash. Press the “UNIT” button to setup the second. Press the “MODE” button and the minute will flash. Press the “UNIT” button to setup the minute. After finishing the timer setup, press the “MODE” button to start the countdown. After finishing the countdown, “00.00” will appear on the LCD displ

Résumé du contenu de la page N° 5

If there is no operation in 60 seconds, the system will return to clock mode. UNIT EXCHANGE Press the “UNIT” button to switch from “g” gram to “oz” ounce. OVER LOAD INDICATOR When the scale is over loaded, “Err” will appear on the display. ADVICE FOR USE AND CARE 1. Placing the scale on a hard and flat surface to ensure reliability and accuracy in weighing. 2. Clean the scales with a damp cloth. Do not allow water to enter the unit. 3. Do not use chemical abrasive cleane

Résumé du contenu de la page N° 6

180 DAYS LIMITED WARRANTY This WHYNTER scale is warranted, to the original owner within the 48 continental states, for 180 days from the date of purchase against defects in material and workmanship under normal use and service. Should your WHYNTER scale prove defective within 180 days from the date of purchase, return the defective part or unit, freight prepaid (within one month of purchase; after one month to one year, customer will be responsible for freight cost to Whynter’s service d